Configuration

Revision as of 14:11, 11 September 2008

OpenSim configuration file

The simulator configuration is managed using a file called OpenSim.ini. This file is used regardless of whether the sim is running in standalone or grid mode. Detailed information on the options available for setttings in this file can be found here.

Database

Opensim's supports the following database-engines:

• SQLite (default - a lightweight database that comes bundled with OpenSim and can be used without requiring any extra configuration. It is mostly intended to get you up and running quickly, not for production use.)
• MySQL (fully supported)
• MSSQL (partially supported - some recent OpenSim features may not yet be implemented)

More information on database support can be found on the OpenSim Database support page.

Standalone vs. Grid

We recommend that you first get OpenSim running in standalone mode before you attempt to connect it to a grid, either your own grid or a public grid. An OpenSim configuration consists of regions (run by region simulators) and 5 core backend services (which manage users, the grid, assets, inventories, and grid-wide messaging, collectively known as UGAIM).

A system running in standalone mode (that is, one with OpenSim.ini configured such that gridmode = false) -- also known as "sandbox mode" -- runs everything (all UGAIM services and one or more regions) in a single executable (OpenSim.exe). External regions cannot be added to an OpenSim running in this mode.

In grid mode, the five ugaim services are each started as separate executables. This means that they can be run either on the same machine or spread out across multiple computers. In this mode, OpenSim.exe serves one or more regions, which communicate with the core servers. This mode even allows region servers run by other people on their own machines to connect, if you wish.

Naturally, this means that running in grid mode is somewhat more complicated than running in standalone mode. It requires an understanding of UUID, X,Y location, server handshake passwords, master avatars, and a couple of other settings. These are not difficult, but do require a little more care in setting things up.

If you want to run a grid of your own (either private or public) you would start the core services up before connecting a region simulator. If you want to connect your region server to a grid that someone else is running, you need only start the region server in grid mode (with the necessary security keys and location information mentioned in the last paragraph).

OpenSim.exe responds to various command line arguments. These include "-inifile", "-configfile", "-gridmode", "-physics", "-config" & "-noverbose". When starting OpenSim in either Windows or Linux, one could, for example, add "-physics=OpenDynamicsEngine" to run the OpenDynamicsEngine instead of basicphysics, or use "-gridmode=true" to force opensim.exe to run as a region server (the rest of the grid services have their own executables). As many of these settings are normally controlled by OpenSim.ini, most users (especially in standalone mode) will not add any command line arguments.

Standalone mode

When you start OpenSim in standalone mode, it will ask you several questions at the console. The first set of prompts that start with "NETWORK SERVERS INFO", you can just hit return to accept the defaults if you will be running in standalone mode. The prompts that start with "DEFAULT REGION CONFIG" are where you need to start paying attention. Some are self-explanatory. Here are explanations for the others:

• Grid Location. OpenSim regions can be placed anywhere on a 65536 by 65536 grid. In standalone mode, it is safe to leave these X and Y locations at their defaults for the first region (additional regions will need different coordinates, of course).
• Filename for local storage. Safe to leave at default.
• Internal IP address; This should always be 0.0.0.0 (0.0.0.0 means "listen for connections on any interface", basically a wildcard)
• Internal IP port for incoming UDP client connection. You can make this any port you want, but it is safe to leave at the default 9000.
• External host name. If you will only be attaching to your sim from a SecondLife client on the same machine, you can leave this at the default 127.0.0.1. If you will be wanting to connect to it from a client on another machine, this should be the IP address or hostname of the machine you are running this sim on. N.B - It appears that this must actually be the External Host IP Address, not the Domain Name.

To connect to your new sim, start up secondlife with the following command line switches:

-loginuri http://127.0.0.1:9000/ -loginpage http://127.0.0.1:9000/?method=login 

This assumes you are running the secondlife client on the same box. If you are running it on a separate box, substitute the IP address of your sim machine.
To create a user:
type create user <first> <last> <password> <x_loc> <y_loc> in the server console.

Grid mode

You want to run your own grid. Great! Assuming that you already got your sim running in standalone mode, here is what you need to do:
1. Current builds of OpenSim grid mode are using mysql to store the grid information. You must have this installed and configured if you want to run your own grid. See mysql-config for more information.
2. Four of the servers should be started in a certain order. UGAI: UserServer, GridServer, AssetServer, InventoryServer. The MessagingServer can be started at any point after the GridServer, and the RegionServer(s) should always come last. These are all found in the bin directory. In windows, you can just double-click on the executables to start them. In Linux and Mac OS X type "mono filename" from a prompt. The executable names, in order, are:

OpenSim.Grid.UserServer.exe
OpenSim.Grid.GridServer.exe
OpenSim.Grid.AssetServer.exe
OpenSim.Grid.InventoryServer.exe
OpenSim.Grid.MessagingServer.exe
OpenSim.exe

3. Start the UserServer. If you will be running the GridServer on the same box, hit enter to accept the defaults, until it gives you the prompt

OpenUser#

This is the main prompt for the user server. If you will be running the GridServer on another box, change the Default Grid Server URI as appropriate.
4. Start the GridServer. Again, you can hit return at all the prompts if you are running them all on the same machine. If not, change the URIs for the Asset Server and User server to point to where you are running them. You will finally get to the console prompt for the GridServer which looks like this:

OpenGrid#

5. Start the AssetServer. The console prompt for this server will be:

OpenAsset#

6. Start the InventoryServer. The console prompt for this server will be:

INVENTORY#

7. Start the MessagingServer. The console prompt for this is:

Messaging#

8. If you are running all of these servers on the same box, which would be the normal configuration, you should be ready to start up your sim. The mode that OpenSim.exe starts in is normally controlled by a setting in your OpenSim.ini. It defaults to standalone mode if that setting is not specified or the file is not found. If you wish, you can force opensim to start in gridmode on the command line as follows:

OpenSim.exe -gridmode=true

or:

mono OpenSim.exe -gridmode=true

With any luck, everything will come up without too many errors.
9. Go to the UserServer console, and type 'create user' to create a new avatar. It will prompt you for the name and password, and the X and Y of the sim that should be his home location. Use 1000 and 1000, or wherever you told your sim to live when you brought it up in standalone mode. At the console of any of these servers, you should be able to type 'help' to get a list of commands.

You should now be able to connect to your new grid with your secondlife client. You need to tell your client to point at the UserServer rather than directly at the sim, though:

secondlife -loginuri http://127.0.0.1:8002/

8002 is the default port for the UserServer, and that IP address should be changed to the server you are running the UserServer on, if they are not all on the same box. Happy OpenSimming!
Note: if you are using Windows Vista, remember to start servers as Admin. If not it will prompt you an error in console like "Error - Access denied"

Multiple regions

Using Physical Prim with the OpenDynamicsEngine on *nix, it's recommended that you set your stack reserve level higher then default with the following command; ulimit -s 262144 Or, run the opensim-ode.sh to start up OpenSimulator.

A powerful region generator is available at: [[RegionGenerator]

For running multiple regions on the same box, you simply make multiple copies of the 'default.xml' file inside the bin/Regions/ directory. You can do this using the script make.php in share/regions, or you can generate the files by hand.

If you want to create the files by hand:

first copy the default.xml file in the bin/Regions directory, and name them anything you want (I name mine region.x.y.xml, where region is the name of the region, and x and y are the grid coords.)

Open each xml file and edit the uuid (a generator can be found at uuidgen webpage or on unix, use the uuidgen command), region name, x & y positions, and internal ip port. IMPORTANT! The UUID, name, and grid coordinates must be unique for each region on a grid. The port assignment must be unique for each region that is running on a particular machine.

Note that sim_location_x and sim_location_y should be adjacent integers if you want your regions to be adjacent, so you can run back and forth between them. IMPORTANT: THESE GRID COORDINATES ARE NOT IN METERS. THEY ARE SIM POSITIONS. (1000, 1000) is next to (1001,1000), (1000, 1001), and so forth. 1256, 2000, 2048 and similar values are not adjacent to 1000, they are very far away, so you would not see your sims from one another.

Once you have 2 or more xml files in the bin/Regions folder, running a single copy of OpenSim.exe will start up all of your sims! If you come across any errors, there is most likely an error in your xml files.

As of 6-Feb-2008, take care NOT to leave editor backup copies of the files in this directory e.g. emacs style backup names like Regionname.xml~. These are loaded by opensim.exe as if they are legitimate region descriptions, and will therefore give errors indicating you are trying to re-use the socket for that region.

Attaching your sim to someone else's grid

To set up the region server (i.e., OpenSim.exe) to connect to an external grid, you should edit the OpenSim.ini file in the bin directory. In that file, there is a [Network] section with URLs for the grid, user, and asset servers, as well as send and receive keys (for a basic level of security). The addresses and send/receive keys will vary depending on the grid you are connecting to, and the grid operator should tell you what values to use.

The other file you may have to change is in your bin/Regions directory. This is where your individual region config files are. If you only have one region, it will by default be called default.xml.

This can be edited with any text editor. The grid owner may tell you what X and Y location you can place your sim at (you can't have multiple sims at the same location on the grid). If so, the fields you will need to change in this file are sim_location_x and sim_location_y. And the external_host_name should be set to the hostname or IP address of your simulation server (i.e., the machine that is running OpenSim.exe). A list of public grids that you can attach your sim to is at OpenSim: Grids

Running

StandAlone

Windows

cd bin
OpenSim.exe

On Windows Vista, it may be necessary to explicitly "Run as administrator" for opensim.exe to accept connections from a client, even when running as an administrator user. Navigate to the opensim\bin directory, right click opensim.exe, and select "Run as administrator". Connect: opensim://localhost:9000 , or opensim://127.0.0.1:9000, or opensim://myipadress:9000

Linux

cd bin
mono OpenSim.exe

OSX

cd bin
mono OpenSim.exe

Local Grid

Windows

cd bin
OpenSim.Grid.UserServer.exe
OpenSim.Grid.GridServer.exe
OpenSim.Grid.AssetServer.exe
OpenSim.Grid.InventoryServer.exe
OpenSim.Grid.MessagingServer.exe
OpenSim.exe

Linux

cd bin
mono OpenSim.Grid.UserServer.exe
mono OpenSim.Grid.GridServer.exe
mono OpenSim.Grid.AssetServer.exe
mono OpenSim.Grid.InventoryServer.exe
mono OpenSim.Grid.MessagingServer.exe
mono OpenSim.exe

OSX'

cd bin
mono OpenSim.Grid.UserServer.exe
mono OpenSim.Grid.GridServer.exe
mono OpenSim.Grid.AssetServer.exe
mono OpenSim.Grid.InventoryServer.exe
mono OpenSim.Grid.MessagingServer.exe
mono OpenSim.exe

Connect: opensim://myipaddress:9000