User:Dz/AO
From OpenSimulator
Animation Override scripts
These are AO scripts I have used or developed over time. Many of them are assembled from bits and pieces of code I have read/seen/fixed/admired. Some of the code snippets appear with permissions, Please do not remove the attributions where they can be found in the comments. The code has been shared, only asking simple consideration. Please respect the wishes of the original authors as I have attempted to do.
These AO designs are NOT compatible with NPCs, as they require a user to touch them to activate.
If you have feedback on script errors, please post it to the page discussion User_talk:Dz/AO
Simple Click on/off Variable speed AO demo
This example uses animations found in the Linda Kelly RUGGED male AO. They should be widely available, and you are free to modify the script to use your own. The variable speed option requires that OS functions be enabled and the threat level set appropriately in the region you want to use this in.
Generate a small cube (0.15, 0.15, 0.15)
Drag copies of the AO animations you want to use into the contents of the cube.
Drop this script in the cube.
// // OpenSimian Speed Scalable Animation Override for OpenSimulator 2014 v2.0 // // Copyright 2014 by Doug Osborn. // This script is Licensed under the Creative Commons Attribution-Share Alike 3.0 License // For a copy of the license terms please see http://creativecommons.org/licenses/by-sa/3.0 // set the animations as instructed below // Remember to put the animation in the prim... // SpdScale is the float multiplier... 1 is default speed // you can reset default in the grey state if you want a boost/damper when the AO is off // ************************** Customize YOUR AO by changing the names of the Animations, and the cycle time for your stands here. list StandNames = ["rugged-stand-1", "rugged-stand-2", "rugged-stand-3"]; integer StandTime = 8; // change this number to the number of seconds between stands list WalkAnimations = [ "Walk-Male-Fast", 1.1, "Walk-Male-Medium", 1.00, "Walk-Male-Slow", 0.95]; // Change this string to the name of the walk animation you want to use string TrnRight = "AO-TurnRight-Male"; // Change this string to the name of your turn right animation string TrnLeft = "AO-TurnLeft-Male"; // Change this string to the name of your turn left animation string RunAnimation = "run"; // Change this string to the name of the RUN animation you want to use string SitAnimation = "AO-Sit2-Male"; // Change this string to the name of the crouch animation you want to use integer OverrideSit = TRUE; // string CrouchAnimation = "AO-Crouch-Male"; // Change this string to the name of the crouch animation you want to use string CrouchWalkAnimation = "AO-CrouchWalk1-Male"; // Change this string to the name of the crouch walk animation you want to use string FlyAnimation = "AO-Fly1-Male"; // Change this string to the name of the fly animation you want to use string HoverAnimation = "AO-Hover-Male"; // Change this string to the name of the hover animation you want to use string SoftLandAnimation = "AO-Softlanding-Male"; // Change this string to the name of the soft land animation you want to use integer LandingTime = 3; // Change this to reflect the length of the standing animation in seconds. string JumpAnimation = "AO-JumpFlip1-Male"; // Change this string to the name of the jump animation you want to use // ******************************************************************************************************************************* key Owner= NULL_KEY; integer resetflag = 0; vector onColor = <42,255,42>; // all nice and green vector offColor = <128,128,128>; // and grey float WalkSpdScale = 1.0; // default speed scale when OFF float SprintSpdScale = 1.5; float FlySpdScale = 2; string LastAnimType = ""; string LastAnimName = ""; string LastRunAnim = ""; string WhichAnimType = ""; float StandCount = 0.0; // Start Me Up Initialize(key id) { if (id == NULL_KEY) // detaching { llSetTimerEvent(0.0); // stop the timer } else // attached, or reset while worn { Owner = id; llRequestPermissions(id, PERMISSION_TRIGGER_ANIMATION); } StandCount = (float) llGetListLength(StandNames); llSetColor(offColor/255.0, ALL_SIDES); llSay(0,"Initialized"); } StartAnimation() { if (LastAnimType != WhichAnimType) { if (WhichAnimType == "Walking") { llStopAnimation(LastAnimName); if(WalkAnimations != []) { list RndWalk = llListRandomize(WalkAnimations,2); LastAnimName = llList2String(RndWalk,0); osSetSpeed(Owner,llList2Float(RndWalk,1)); // llSay(0,LastAnimName); llStartAnimation(LastAnimName); } llSetTimerEvent(0); } if (WhichAnimType == "Running") { llStopAnimation(LastAnimName); if(RunAnimation != "") { LastAnimName = RunAnimation; llStartAnimation(LastAnimName); } osSetSpeed(Owner,SprintSpdScale); llSetTimerEvent(0); } if (WhichAnimType == "Standing") { llStopAnimation(LastAnimName); if(StandCount > 0.0) { integer whichone = (integer)llFrand(StandCount);// pick a new stand LastAnimName = llList2String (StandNames,whichone); llStartAnimation(LastAnimName); llSetTimerEvent(StandTime); } else { llSetTimerEvent(0); } } if (WhichAnimType == "Sitting") { llStopAnimation(LastAnimName); if(SitAnimation != "" && OverrideSit) { LastAnimName = SitAnimation; llStartAnimation(LastAnimName); } llSetTimerEvent(0); } if (WhichAnimType == "Flying") { llStopAnimation(LastAnimName); if(FlyAnimation != "") { LastAnimName = FlyAnimation; llStartAnimation(LastAnimName); } osSetSpeed(Owner, FlySpdScale); llSetTimerEvent(0); } if (WhichAnimType == "Hovering") { llStopAnimation(LastAnimName); if(HoverAnimation != "") { LastAnimName = HoverAnimation; llStartAnimation(LastAnimName); } llSetTimerEvent(0); } if (WhichAnimType == "Soft Landing") { llStopAnimation(LastAnimName); if(SoftLandAnimation != "") { LastAnimName = SoftLandAnimation; llStartAnimation(LastAnimName); llSetTimerEvent(LandingTime); } llSetTimerEvent(0); } if (WhichAnimType == "Crouching") { llStopAnimation(LastAnimName); if(CrouchAnimation != "") { LastAnimName = CrouchAnimation; llStartAnimation(LastAnimName); } llSetTimerEvent(0); } if (WhichAnimType == "Crouch Walking") { llStopAnimation(LastAnimName); if(CrouchWalkAnimation != "") { LastAnimName = CrouchWalkAnimation; llStartAnimation(LastAnimName); } llSetTimerEvent(0); } if (WhichAnimType == "Jumping") { llStopAnimation(LastAnimName); if(JumpAnimation != "") { LastAnimName = JumpAnimation; llStartAnimation(LastAnimName); } llSetTimerEvent(0); } if (WhichAnimType == "Turning Right") { llStopAnimation(LastAnimName); if(TrnRight != "") { LastAnimName = TrnRight; llStartAnimation(LastAnimName); } llSetTimerEvent(0); } if (WhichAnimType == "Turning Left") { llStopAnimation(LastAnimName); if(TrnLeft != "") { LastAnimName = TrnLeft; llStartAnimation(LastAnimName); } llSetTimerEvent(0); } } } default { state_entry() { if (llGetAttached() != 0) { Initialize(llGetOwner()); } } on_rez(integer start_param) { // Restarts the script every time the object is rezzed llResetScript(); } attach(key id) { Initialize(id); if (osIsNpc(Owner) == 1) { state on; llSay(0," NPC Overide engaged"); } } run_time_permissions(integer perm) { if (perm & PERMISSION_TRIGGER_ANIMATION) { state off; } } changed(integer change) { if (change & CHANGED_INVENTORY) { resetflag = 1; llSetTimerEvent(15); } if (change & CHANGED_REGION_RESTART) { llResetScript(); } } timer() { if(resetflag ==1) llResetScript(); } state_exit() { // llSay(0, "The script leaves the default state."); } } state on { state_entry() { llSetColor(onColor/255.0, ALL_SIDES); osSetSpeed(Owner,WalkSpdScale); llSay(0,"Touch to disable"); WhichAnimType = llGetAnimation(Owner); StartAnimation(); LastAnimType = WhichAnimType; } touch_end(integer num_detected) { state off; } changed(integer change) { if (change & CHANGED_ANIMATION) { WhichAnimType = llGetAnimation(Owner); StartAnimation(); LastAnimType = WhichAnimType; } if (change & CHANGED_INVENTORY) { resetflag = 1; llSetTimerEvent(15); } if (change & CHANGED_REGION_RESTART) { llResetScript(); } } timer() { if(resetflag ==1) llResetScript(); llStopAnimation(LastAnimName); integer whichone = (integer)llFrand(StandCount); // pick the new stand at random LastAnimName = llList2String (StandNames,whichone); llStartAnimation(LastAnimName); // llOwnerSay( "using " + LastAnimName); // uncomment this to see which stand gets trigger by the timer llSetTimerEvent(StandTime); } state_exit() { llStopAnimation(LastAnimName); } } state off { state_entry() { llSetColor(offColor/255.0, ALL_SIDES); osSetSpeed(Owner,1.0); llOwnerSay("Touch to enable"); } touch_end(integer num_detected) { state on; } changed(integer change) { if (change & CHANGED_INVENTORY) { resetflag = 1; llSetTimerEvent(15); } if (change & CHANGED_REGION_RESTART) { llResetScript(); } } timer() { if(resetflag ==1) llResetScript(); } state_exit() { LastAnimType = ""; // should trigger the new animation to start, even if it was the same when we turned it off } }
Edit the script to make sure the animation names in the top section match the animation names you added to the cube.
Adjust the speed values in the walk animation list and below in the section of code that looks like this... ( 1.0 is the default Opensim speed, this is a multiplier)
list WalkAnimations = [ "Walk-Male-Fast", 1.1, "Walk-Male-Medium", 1.00, "Walk-Male-Slow", 0.95]; // Change this string to the name of the walk animation you want to use ... float WalkSpdScale = 1.0; // default speed scale when OFF float SprintSpdScale = 1.5; float FlySpdScale = 2;
Rename the cube "MYAO" (something you can find in your inventory) and pick it up.
Attach it to one of your HUD positions ...
Resize and position.
Touch to toggle between on and off. Re-attach or edit and "script reset" to reset.
