Revision as of 14:04, 17 April 2014

Introduction

Normally, users are created in OpenSimulator via the "create user" command on the region console (in standalone configuration) or on the ROBUST service console (in grid configuration). However, users can also be created by making an XMLRPC call directly to the ROBUST service.

This facility has been available since OpenSimulator 0.7.3. It can currently only be used in grid configuration. On standalone, users can be created via the different create user call on the RemoteAdmin module.

Setup

The listeners for some of the XMLRPC calls on ROBUST has to be explicitly enabled. In the [UserAccountService] section of Robust.ini, set

[UserAccountService]
AllowCreateUser = true
AllowSetAccount = true

and in [AuthenicationService]

[AuthenticationService]
AllowSetPassword = true

Please be aware that this will expose the call on the UserAccountServiceConnector and AuthenticationServiceConnector as listed in the ServiceConnectiors parameter in the [Startup] section at the top of the file. The default port used (8003) is one that should not be exposed to other users. For logging into OpenSimulator you only need to expose the port that is running the LLLoginServiceInConnector (8002 by default).

This also means that these facilities should not be enabled on an open grid (one where untrusted third parties can connect simulators) at this time.

Default avatar entries

If you want a new user to have the initial minimal body-part/clothing set (skin, shape, eyes, hair, pants, shirt) required for them to appear as anything other than a gas-cloud then make sure

[UserAccountService] 
CreateDefaultAvatarEntries = true 

in Robust.ini. This setting will already be true in the Robust.ini.example of OpenSimulator 0.7.4 and later.

Use

createuser

Here's an example python program to call this. It assumes that your ROBUST services are running on localhost.

#!/usr/bin/python
 
import httplib
import urllib
 
params = urllib.urlencode({'METHOD':'createuser', 'FirstName':'Jon', 'LastName':'Snow', 'Password':'test', 'PrincipalID':'3a1c8128-908f-4455-8157-66c96a46f75e'})
conn = httplib.HTTPConnection("localhost", 8003);
conn.request("POST", "/accounts", params)
response = conn.getresponse()
print response.read();

PrincipalID is the unique ID of the user.

If everything goes well, you should get back

<?xml version="1.0"?>
<ServerResponse>
  <result type="List">
    <FirstName>Jon</FirstName>
    <LastName>Snow</LastName>
    <Email/>
    <PrincipalID>3a1c8128-908f-4455-8157-66c96a46f75e</PrincipalID>
    <ScopeID>00000000-0000-0000-0000-000000000000</ScopeID>
    <Created>1318974501</Created>
    <UserLevel>0</UserLevel>
    <UserFlags>0</UserFlags>
    <ServiceURLs>HomeURI*;GatekeeperURI*;InventoryServerURI*;AssetServerURI*;</ServiceURLs>
  </result>
</ServerResponse>

Don't worry about ScopeID, this is used for allow multiple grids to co-exist inside a single database. Created is a unix timestamp of the time the user was created. UserLevel determines whether the user is a god (>= 200) or can log in at all (<0). ServiceURLs are HyperGrid related and do not concern us here.

If the call fails you will get the response

<?xml version="1.0"?>
<ServerResponse>
  <result>Failure</result>
</ServerResponse>

setaccount

Here's an example python program to call this. It assumes that your ROBUST services are running on localhost.

#!/usr/bin/python
 
import httplib
import urllib
 
params = urllib.urlencode({'METHOD':'setaccount', 'FirstName':'Tyrion', 'PrincipalID':'3a1c8128-908f-4455-8157-66c96a46f75e'})
conn = httplib.HTTPConnection("localhost", 8003);
conn.request("POST", "/accounts", params)
response = conn.getresponse()
print response.read();

PrincipalID is the unique ID of the user. Here, it is used to identify the user that we set up earlier.

If everything goes well, you should get back

<?xml version="1.0"?>
<ServerResponse>
  <result type="List">
    <FirstName>Tyrion</FirstName>
    <LastName>Snow</LastName>
    <Email/>
    <PrincipalID>3a1c8128-908f-4455-8157-66c96a46f75e</PrincipalID>
    <ScopeID>00000000-0000-0000-0000-000000000000</ScopeID>
    <Created>1318974501</Created>
    <UserLevel>0</UserLevel>
    <UserFlags>0</UserFlags>
    <ServiceURLs>HomeURI*;GatekeeperURI*;InventoryServerURI*;AssetServerURI*;</ServiceURLs>
  </result>
</ServerResponse>

Note that the first name has now changed from Jon to Tyrion.

If the call fails you will get the response

<?xml version="1.0"?>
<ServerResponse>
  <result>Failure</result>
</ServerResponse>

setpassword

Changing a password is done through the authentication service rather than the user account service. Unfortunately, the parameters required are slightly different from those used by the user account service. In this case we need to make a call to http://<robust-services-address>/auth/plain with METHOD = setpassword, PRINCIPAL = <principalID> and PASSWORD = <new-password>. Here's an example

#!/usr/bin/python
 
import httplib
import urllib
 
params = urllib.urlencode({'METHOD':'setpassword', 'PRINCIPAL' : '3a1c8128-908f-4455-8157-66c96a46f75e', 'PASSWORD':'bing'})
conn = httplib.HTTPConnection("localhost", 8003);
conn.request("POST", "/auth/plain", params)
response = conn.getresponse()
print response.read();

This aims to set Wilma Flintstone's password to bing, identifying her with the PrincipalID we received before. If successful, the call will return

<?xml version="1.0"?>
<ServerResponse>
  <Result>Success</Result>
</ServerResponse>

On failure,

<?xml version="1.0"?>
<ServerResponse>
  <Result>Failure</Result>
</ServerResponse>