HyperGrid Team/HowTo
From OpenSimulator
 |
Languages: |
|
Refer to: Installing and Running Hypergrid
Installing
Checkout OpenSim, prebuild and build as normal.
for Linux users that will be command line like below, in this example i will use /opt for the checkout.
# cd /opt # svn co http://opensimulator.org/svn/opensim/trunk opensim # cd opensim # ./runprebuild.sh # nant
for Windows users that will be command line like below, in this example i will use C:\opensim for the checkout.
SVN checkout e.g. with TortoiseSVN http://tortoisesvn.net/ by right clicking the opensim folder in explorer and choose SVN Checkout you want to use like C:\opensim and type in this url - http://opensimulator.org/svn/opensim/trunk under "URL of repository", and hit Ok.
When svn checkout is done open a command prompt via start - run - cmd
c:\>cd opensim c:\opensim> runprebuild.bat c:\opensim> compile.bat
- If you want to run in standalone mode and you want it to be network-able, or if you have your grid on loopback (127.0.0.1) change all the [Network] server addresses to "http://<external_host_name>:<http_port>". See below for the OpenSim.ini
- To make sure the hypergrid is running type this on your console: link-region. If you don't get/hear anything back, the hypergrid is not properly Enabled/Installed.
- Make a copy of your /bin/OpenSim.ini.example and rename it to OpenSim.ini
The following is an example of what needs to be changed in OpenSim.ini to have your Region HyperGrid Enabled note: If you have several regions on one OpenSim.exe, all regions will after these changes be HyperGrid Enabled.
OpenSim.ini
- Example of the OpenSim.ini changes for a standalone:
; Set this to true if you want this OpenSimulator to run the Hypergrid functionality hypergrid = true
; ## ; ## WORLD MAP ; ## Usually set in the included file StandaloneHypergrid.ini ; ## WorldMapModule = "HGWorldMap"
[Network] http_listener_port = 9000 default_location_x = choose a number between 8000 - 12000 (if you want to HG to and from OSGrid) default_location_y = choose a number between 8000 - 12000 (if you want to HG to and from OSGrid)
grid_server_url = http://example.com:9000 grid_send_key = null grid_recv_key = null user_server_url = http://example.com:9000 user_send_key = null user_recv_key = null asset_server_url = http://example.com:9000 inventory_server_url = http://example.com:9000 messaging_server_url = http://example.com:9000
- Example of the OpenSim.ini changes for a grided OpenSim:
; Set this to true if you want this OpenSimulator to run the Hypergrid functionality hypergrid = true
; ## ; ## WORLD MAP ; ## Usually set in the included file GridHypergrid.ini ; ## WorldMapModule = "HGWorldMap"
[Network] http_listener_port = 9000 default_location_x = choose a number between 8000 - 12000 (if you want to HG to and from OSGrid) default_location_y = choose a number between 8000 - 12000 (if you want to HG to and from OSGrid) grid_server_url = http://example.com:8001 grid_send_key = null grid_recv_key = null user_server_url = http://example.com:8002 user_send_key = null user_recv_key = null asset_server_url = http://example.com:8003 inventory_server_url = http://example.com:8004 ; Port 8005 reserved messaging_server_url = http://example.com:8006
In your OpenSim.ini . HGWorldMapModule will, after teleporting to another grid, clean up tiles in your map left over from the grid on which you were previously.
If you already have an OSGrid connected region, and you want that Hypergrid Enabled, just make the changes to OpenSim.ini as described above, only remember to keep the http://osgrid.org:port in [network section] and the OSgrid specific keys. "1234"
After these OpenSim.ini changes you are ready to proceed with your new Standalone HG Enabled region so read on to start everything up.
To start the OpenSimulator in a basic sqlite setup
Start the /opt/opensim/bin/opensim-ode.sh script.
Linux
# cd /opt/opensim/bin # ./opensim-ode.sh
Windows
c:\>cd \opensim\bin c:\>opensim.exe -physics=OpenDynamicsEngine
On startup answer these questions: (on the External Host Name question type in your Public/External IP Address. 192.168.35.131 in this example. for x,y choose numbers between 8000-12000, put in Local Server Firstname and Lastname)
DEFAULT REGION CONFIG: Region Name [OpenSim Test]: MyHGRegion DEFAULT REGION CONFIG: Grid Location (X Axis) [1000]: 8000 - 12000 DEFAULT REGION CONFIG: Grid Location (Y Axis) [1000]: 8000 - 12000 DEFAULT REGION CONFIG: Internal IP Address for incoming UDP client connections [0.0.0.0]: DEFAULT REGION CONFIG: Internal IP Port for incoming UDP client connections [9000]: DEFAULT REGION CONFIG: External Host Name [127.0.0.1]: 192.168.35.131 DEFAULT REGION CONFIG: First Name of Master Avatar [Test]: firstname DEFAULT REGION CONFIG: Last Name of Master Avatar [User]: lastname DEFAULT REGION CONFIG: (Sandbox Mode Only)Password for Master Avatar account test]:
21:52:59 - [STARTUP]: No startup command script specified. Moving on... 21:52:59 - [!]:STARTUP COMPLETE Currently selected region is MyHGRegion 21:52:59 - [STARTUP]: Startup took 0m 52s Region (MyHGRegion) #
After the initial setup you OpenSimulator will have created a default.xml file under /bin/Regions In the default.xml make sure that the x,y coords match the OpenSim.ini's settings
example
sim_location_x="8111" sim_location_y="8111"
You will also need to open your firewall or router on region ports as specified in default.xml (internal_ip_port="9000") and OpenSim.ini in this example you would have to open port 9000 on TCP/UDP, to be able to access your standalone region from the Internet.
Now to test your Hypergrid settings and start HyperGridding test if you can teleport between regions like below with method 3 of dynamic linking.
Testing your HyperGrid via Method 3 (dynamic)
Starting in svn r8193, if you're in an HG-enabled region, you'll be able to dynamically link sims, and teleport there, in any one of these ways (and probably more). All you need to know is the target address, e.g. from the list below.
1) Type for example secondlife://hypervz.hypergrid.dk:9000/ in the public or an im chat box, click the chat "history" and click on that new link, if it works it will then show you the new region on the Teleport Map.
2) Click the the "Map" button and search for HG's like this: hypervz.hypergrid.dk:9000
3) Using the viewer's embedded browser visit pages that have links like secondlife://ucigrid04.nacs.uci.edu:9007/ (there's one up at http://www.ics.uci.edu/~lopes/hypergrid/test.html)
For example to teleport from your Standalone HG Enabled OpenSimulator server to an OSGrid region you would use secondlife://External_IP_or_DNS_Name_Of_Your_OSGrid_Connected_Server:port:RegionName
Again, you can link to a specific region within an instance by adding the name of that region at the end, like this: secondlife://ucigrid04.nacs.uci.edu:9007:Gateway 7000/
Important Notes
Make sure you have a 'home' set. If your home region doesn't exist, the hyperlink TPs may not work. To set your home, go to one of your local regions and "Set Home" from the viewer.
Prior to OpenSim release 0.7.6 and when using earlier viewers that had a viewer bug, you could only TP between regions that were no more than 4096 cells apart in any dimension. Recent 0.7.6 onwards grids and corrected viewers (Singularity, Kokua, Firestorm as at 1-Nov-2013) should no longer have this restriction.
After svn r9321 the startup commandline switch -hypergrid=true is moved into OpenSim.ini as described above.
