V2 Groups

Revision as of 05:25, 26 October 2013

As of OpenSimulator 0.7.6 Diva implemented the V2 Groups, which are now part of OpenSimulator core. Using the new groups do not need to use any third Party modules any more.

The below script helps, converting existing Flotsam Groups or jOpenSim Groups (which uses Flotsam anyway) to the new Groups. This ensures, that you dont lose any Group information, when you want to switch over.

Differences between tables names

jOpenSim	Flotsam	V2
jos_opensim_groupactive	osagent * AgentID * ActiveGroupID	os_groups_principals * PrincipalID * ActiveGroupID
jos_opensim_group	osgroup * GroupID * Name * Charter * InsigniaID * FounderID * MemberShipFee * OpenEnrollment * ShowInList * AllowPublish * MaturePublish * OwnerRoleID	os_groups_groups * GroupID * Name * Charter * InsigniaID * FounderID * MembershipFee * OpenEnrollment * ShowInList * AllowPublish * MaturePublish * OwnerRoleID
jos_opensim_groupinvite	osgroupinvite * InviteID * GroupID * RoleID * AgentID * TMStamp	os_groups_invites * InviteID * GroupID * RoleID * PrincipalID * TMStamp
jos_opensim_groupmembership	osgroupmembership * GroupID * AgentID * SelectedRoleID * Contribution * ListInProfile * AcceptNotices	os_groups_membership * GroupID * PrincipalID * SelectedRoleID * Contribution * ListInProfile * AcceptNotices
jos_opensim_groupnotice	osgroupnotice * GroupID * NoticeID * Timestamp * FromName * Subject * Message	os_groups_notices * GroupID * NoticeID * TMStamp * FromName * Subject * Message
jos_opensim_grouprolemembership	osgrouprolemembership * GroupID * RoleID * AgentID	os_groups_rolemembership * GroupID * RoleID * PrincipalID
jos_opensim_grouprole	osrole * GroupID * RoleID * Name * Description * Title * Powers	os_groups_roles * GroupID * RoleID * Name * Description * Title * Powers

Notes

You do not need to consider the field BinaryBucket in the flotsam table osgroupnotice as long as you did not apply the patch attached to Mantis #6699. If you have applied it, then maybe the following information will help, if you do not want to miss the content in the new tables:

Byte offset and description of bucket data:

0: 1 byte indicating if attachment is present
1: 1 byte indicating the type of attachment
2: 16 bytes - Group UUID
18: 16 bytes - UUID of the attachment owner
34: 16 bytes - UUID of the attachment
50: variable - Name of the attachment
??: NUL byte to terminate the attachment name

This information is copied from the original patch and describes the content format of field BinaryBucket.

Flotsam

Use this script if your are using the Flotsam groups.

The Script (Replace ROBUSTDB with your ROBUST database and FLOTSAMDB with your database, containing your Flotsam tables!):

INSERT INTO `ROBUSTDB`.`os_groups_groups`
(GroupID, Name, Charter, InsigniaID, FounderID, MembershipFee, OpenEnrollment, ShowInList,
AllowPublish, MaturePublish, OwnerRoleID)
SELECT GroupID, Name, Charter, InsigniaID, FounderID, MemberShipFee, OpenEnrollment, ShowInList, AllowPublish,
MaturePublish, OwnerRoleID
FROM `FLOTSAMDB`.osgroup;
 
/*fill os_groups_invites in ROBUST database with values from osgroupinvite
or FlotSam osgroupinvite*/
INSERT INTO `ROBUSTDB`.`os_groups_invites`
(InviteID, GroupID, RoleID, PrincipalID, TMStamp)
SELECT InviteID, GroupID, RoleID, AgentID, TMStamp
FROM `FLOTSAMDB`.osgroupinvite;
 
/*fill os_groups_membership in ROBUST database with values from osgroupmembership
or FlotSam osgroupmembership*/
INSERT INTO `ROBUSTDB`.`os_groups_membership`
(GroupID, PrincipalID, SelectedRoleID, Contribution, ListInProfile, AcceptNotices)
SELECT GroupID, AgentID, SelectedRoleID, Contribution, ListInProfile, AcceptNotices
FROM `FLOTSAMDB`.osgroupmembership;
 
/*fill os_groups_notices in ROBUST database with values from osgroupnotice
or FlotSam osgroupnotice*/
INSERT INTO `ROBUSTDB`.`os_groups_notices`
(GroupID, NoticeID, TMStamp, FromName, Subject, Message)
SELECT GroupID, NoticeID, Timestamp, FromName, Subject, Message
FROM `FLOTSAMDB`.osgroupnotice;
 
/*fill os_groups_principals in ROBUST database with values from osagent
or FlotSam osagent*/
INSERT INTO `ROBUSTDB`.`os_groups_principals`
(PrincipalID, ActiveGroupID)
SELECT AgentID, ActiveGroupID
FROM `FLOTSAMDB`.osagent;
 
/*fill os_groups_rolemembership in ROBUST database with values from osrolemembership
or FlotSam osgrouprolemembership*/
INSERT INTO `ROBUSTDB`.os_groups_rolemembership
(GroupID, RoleID, PrincipalID)
SELECT GroupID, RoleID, AgentID
FROM `FLOTSAMDB`.osgrouprolemembership;
 
/*fill os_groups_roles in ROBUST database with values from osroles
or FlotSam osrole*/
INSERT INTO `ROBUSTDB`.os_groups_roles
(GroupID, RoleID, Name, Description, Title, Powers)
SELECT GroupID, RoleID, Name, Description, Title, Powers
FROM `FLOTSAMDB`.osrole;

jOpenSim

Use this script if you are using the jOpenSim groups.

The Script (Replace ROBUSTDB with your ROBUST database and FLOTSAMDB with your database, containing your jOpenSim tables!):

/* SQL script to convert group tables from Flotsam Groups (Group database) or jOpenSim (tables in Joomla Database)
to new V2 groups, which are part of OpenSimulator core up from 0.7.6 branch*/
 
/* FlotSam Tables latest version from
https://github.com/mcortez/flotsam/tree/master/flotsam/Servers/XmlRpcGroupsServer/
Commit-No.: 18275462c9*/
 
/* jOpenSim Version: 0.2.6.4*/
 
/*fill os_groups_groups in ROBUST database with values from jos_opensim_groups
or FlotSam osgroup*/
INSERT INTO `ROBUSTDB`.`os_groups_groups`
(GroupID, Name, Charter, InsigniaID, FounderID, MembershipFee, OpenEnrollment, ShowInList,
AllowPublish, MaturePublish, OwnerRoleID)
SELECT GroupID, Name, Charter, InsigniaID, FounderID, MemberShipFee, OpenEnrollment, ShowInList, AllowPublish,
MaturePublish, OwnerRoleID
FROM `FLOTSAMDB`.jos_opensim_group;
 
/*fill os_groups_invites in ROBUST database with values from jos_opensim_groupinvite
or FlotSam osgroupinvite*/
INSERT INTO `ROBUSTDB`.`os_groups_invites`
(InviteID, GroupID, RoleID, PrincipalID, TMStamp)
SELECT InviteID, GroupID, RoleID, AgentID, TMStamp
FROM `FLOTSAMDB`.jos_opensim_groupinvite;
 
/*fill os_groups_membership in ROBUST database with values from jos_opensim_groupmembership
or FlotSam osgroupmembership*/
INSERT INTO `ROBUSTDB`.`os_groups_membership`
(GroupID, PrincipalID, SelectedRoleID, Contribution, ListInProfile, AcceptNotices)
SELECT GroupID, AgentID, SelectedRoleID, Contribution, ListInProfile, AcceptNotices
FROM `FLOTSAMDB`.jos_opensim_groupmembership;
 
/*fill os_groups_notices in ROBUST database with values from jos_opensim_groupnotice
or FlotSam osgroupnotice*/
INSERT INTO `ROBUSTDB`.`os_groups_notices`
(GroupID, NoticeID, TMStamp, FromName, Subject, Message)
SELECT GroupID, NoticeID, Timestamp, FromName, Subject, Message
FROM `FLOTSAMDB`.jos_opensim_groupnotice;
 
/*fill os_groups_principals in ROBUST database with values from jos_opensim_groupactive
or FlotSam osagent*/
INSERT INTO `ROBUSTDB`.`os_groups_principals`
(PrincipalID, ActiveGroupID)
SELECT AgentID, ActiveGroupID
FROM `FLOTSAMDB`.jos_opensim_groupactive;
 
/*fill os_groups_rolemembership in ROBUST database with values from jos_opensim_grouprolemembership
or FlotSam osgrouprolemembership*/
INSERT INTO `ROBUSTDB`.os_groups_rolemembership
(GroupID, RoleID, PrincipalID)
SELECT GroupID, RoleID, AgentID
FROM `FLOTSAMDB`.jos_opensim_grouprolemembership;
 
/*fill os_groups_roles in ROBUST database with values from jos_opensim_grouproles
or FlotSam osrole*/
INSERT INTO `ROBUSTDB`.os_groups_roles
(GroupID, RoleID, Name, Description, Title, Powers)
SELECT GroupID, RoleID, Name, Description, Title, Powers
FROM `FLOTSAMDB`.jos_opensim_grouprole;
 
/*fill os_groups_roles in ROBUST database with values from jos_opensim_offlinemessages
--> no corresponding table in FlotSam  --  only applies to jOpenSim*/
INSERT INTO `ROBUSTDB`.im_offline
(PrincipalID, Message, TMStamp)
SELECT fromAgentID, Message, sent
FROM `FLOTSAMDB`.jos_opensim_offlinemessages;

Region configuration example for HG enabled robust grid

This example file is for useing V2 groups on your region thats connected to a grid with robust as grid server.
This example is enabled for Hypergrid.
The configuration options you can find in the opensim.ini file under the section [Groups]

This help section possible need improvements and corrections !!


   ;# {Enabled} {} {Enable groups?} {true false} false
   ;; Enables the groups module
   
Enabled = true

   ;# {LevelGroupCreate} {Enabled:true} {User level for creating groups} {} 0
   ;; Minimum user level required to create groups
   
LevelGroupCreate = 0

   ;# {Module} {Enabled:true} {Groups module to use? (Use GroupsModule to use Flotsam/Simian)} {Default "Groups Module V2"} Default
   ;; The default module can use a PHP XmlRpc server from the Flotsam project at
   ;; http://code.google.com/p/flotsam/
   ;; or from the SimianGrid project at http://code.google.com/p/openmetaverse
   ; Module = Default
   ;; or... use Groups Module V2, which works for standalones and robust grids
   
Module = "Groups Module V2"

   ;# {StorageProvider} {Module:Groups Module V2} {The DLL that provides the storage for V2} {OpenSim.Data.MySQL.dll} 
   
StorageProvider = OpenSim.Data.MySQL.dll

   ;# {ServicesConnectorModule} {Module:GroupsModule Module:Groups Module V2} {Service connector to use for groups} {XmlRpcGroupsServicesConnector SimianGroupsServicesConnector "Groups Local Service Connector" "Groups Remote Service Connector" "Groups HG Service Connector"} XmlRpcGroupsServicesConnector
   ;; Service connectors to the Groups Service as used in the GroupsModule.  Select one as follows:
   ;; -- for Flotsam Groups use XmlRpcGroupsServicesConnector
   ;; -- for Simian Groups use SimianGroupsServicesConnector
   ;; -- for V2 Groups, standalone, non-HG use "Groups Local Service Connector"
   ;; -- for V2 Groups, grided sim, non-HG use "Groups Remote Service Connector"
   ;; -- for V2 Groups, HG, both standalone and grided sim, use "Groups HG Service Connector"
   ;; Note that the quotes "" around the words are important!
   ; ServicesConnectorModule = XmlRpcGroupsServicesConnector
   
ServicesConnectorModule = "Groups HG Service Connector"

   ;# {LocalService} {ServicesConnectorModule:Groups HG Service Connector} {Is the group service in this process or elsewhere?} {local remote} local
   ;; Used for V2 in HG only. If standalone, set this to local; if grided sim, set this to remote
   ; LocalService = local
   
LocalService = remote

   ;# {GroupsServerURI} {Module:GroupsModule (ServicesConnectorModule:Groups Remote Service Connector or (ServicesConnectorModule:Groups HG Service Connector and LocalService:remote))} {Groups Server URI} {}
   ;; URI for the groups services of this grid
   ;; e.g. http://yourxmlrpcserver.com/xmlrpc.php for Flotsam XmlRpc
   ;; or http://mygridserver.com:82/Grid/ for SimianGrid
   ;; or http:://mygridserver.com:8003 for robust, V2
   ;; Leave it commented for standalones, V2
   ; GroupsServerURI = ""
   
GroupsServerURI = "http://mygridserver.com:8003"

   ;# {HomeURI} {ServicesConnectorModule:Groups HG Service Connector} {What's the home address of this world?} {} 
   ;; Used for V2 in HG only. For example
   ;; http://mygridserver.com:9000 or http://mygridserver.com:8002
   ;; If you have this set under [Startup], no need to set it here, leave it commented
   
HomeURI = "http://mygridserver.com:8002" 

   ;# {MessagingEnabled} {Module:GroupsModule Module:Groups Module V2} {Is groups messaging enabled?} {true false} true
   
MessagingEnabled = true

   ;# {MessagingModule} {MessagingEnabled:true} {Module to use for groups messaging} {GroupsMessagingModule "Groups Messaging Module V2"} GroupsMessagingModule
   ; MessagingModule = GroupsMessagingModule
   ;; or use V2 for Groups V2
   
MessagingModule = "Groups Messaging Module V2"

   ;# {NoticesEnabled} {Module:GroupsModule Module:Groups Module V2} {Enable group notices?} {true false} true
   ;; Enable Group Notices
   
NoticesEnabled = true

   ;# {MessageOnlineUsersOnly} {Module:GroupsModule Module} {Message online users only?} {true false} false
   ; Experimental option to only message online users rather than all users
   ; Should make large groups with few online members messaging faster, as the expense of more calls to presence service
   ; Applies Flotsam Group only. V2 has this always on, no other option
   
MessageOnlineUsersOnly = True

@@ Line 270: / Line 270: @@
 The configuration options you can find in the opensim.ini file under the section [Groups]
-'''This help section  can use improvements and corrections !!'''
+'''This help section possible need improvements and corrections !!'''
 <code>

Views

V2 Groups

From OpenSimulator

Revision as of 05:25, 26 October 2013

Contents

Differences between tables names

Notes

Flotsam

jOpenSim

Region configuration example for HG enabled robust grid

Personal tools

General

For Administrators

For Developers

For Creators

For Grid Users

Related Links

About This Wiki

Search

Tools