Troubleshooting

Revision as of 20:49, 14 January 2008

This page gives any system-specific configuration settings that may be useful, and advice for problems that might be encountered.

System-specific configuration

CentOS 5

To install mono and nant, you can use the "Linux Installer for x86" found at http://www.mono-project.com/Downloads.

SVN can be installed by:

yum install subversion

Mono defaults to installing into /opt, so you may have to add this path to your environment variables, for example, in your ~/.bashrc:

export PATH="/opt/mono-1.2.5/bin:$PATH"
export PKG_CONFIG_PATH="/opt/mono-1.2.5/lib/pkgconfig:$PKG_CONFIG_PATH"
export MANPATH="/opt/mono-1.2.5/share/man:$MANPATH"
export LD_LIBRARY_PATH="/opt/mono-1.2.5/lib:$LD_LIBRARY_PATH"

After changing LD_LIBRARY_PATH, you should update the dynamic linker cache:

ldconfig

You may still encounter the "The current runtime framework 'mono-2.0' is not correctly configured in the NAnt configuration file." error listed below. In that case, this may fix this:

yum install glib

If you are running a firewall as well (i.e., if iptables -L shows a list of ACCEPT and REJECT rules), you'll have to open the necessary ports if you want to access the sim from other machines. For standalone mode:

iptables -I RH-Firewall-1-INPUT -p tcp --dport 9000 -j ACCEPT
iptables -I RH-Firewall-1-INPUT -p udp --dport 9000 -j ACCEPT

Debian 4.0r0

If you set your system to use unstable sources, and then install some packages listed below, everything should just work. To use unstable sources, modify your /etc/apt/sources.list file, replacing 'etch' or 'stable' with 'unstable':

deb ftp://ftp.debian.org/debian/ unstable main
deb-src ftp://ftp.debian.org/debian/ unstable main

Then update your packages to the new versions:

apt-get update
apt-get dist-upgrade

This will probably change a large number of packages, and may break things. In my experience, however, if you do not use unstable sources then the packages are not up to date enough, and you run into version issues, which lead to two DllNotFoundException errors below appearing in the console output: gdiplus.dll and libopenjpeg-libsl-2.1.2.0.so.

Once the sources are updated, we need to install the necessary packages to be able to build OpenSim:

apt-get install subversion mono nant mono-gmcs mono-mjs libmono-microsoft8.0-cil libmono-system-runtime2.0-cil

If any of these packages are missing, you'll probably encounter one of the errors listed below. However, with these packages, OpenSim should build cleanly.

Gentoo

some Mono dependency & latest Mono itself may use "~x86" masked packages (assuming x86 is your platform, change may be made to reflect your ex:"~amd64" for 64bits). You could check for USE parameter with:

ACCEPT_KEYWORDS="~x86" emerge -vp subversion nant mono libgdiplus

Ten install with:

ACCEPT_KEYWORDS="~x86" emerge subversion nant mono libgdiplus

N.B: The ACCEPT_KEYWORDS="~x86" can be set in Gentoo /etc/make.conf file, but that turn up all the emerges in testing/unstable, using it at the begining of emerge command line use it only for current emerge process

Mac OS X

This assumes you're using the universal binary for mono from the Mono Project site.

After installing mono, you may need to update your pkg-config path. I set this in ~/.bash_profile:

export PKG_CONFIG_PATH="/Library/Frameworks/Mono.framework/Versions/1.2.5.1/lib/pkgconfig/:${PKG_CONFIG_PATH}"

If you are using ODE, you will have to rebuild the ODE library by hand. First download the opensim-libs project from SVN, then configure and build ODE. From a Terminal window:

svn co http://opensimulator.org/svn/opensim-libs/trunk opensim-libs
cd opensim-libs/unmanaged/OpenDynamicsEngine/
./configure
make

Then copy the file ode/src/libode.dylib into your OpenSim bin directory.

Errors and fixes

Build Workarounds

Disappearing prims due to duplicate UID's in prims

Generally this problem occurs when the same save-xml2/load-xml2 file is loaded in adjacent regions, and it is caused by duplicate UID's. There is a switch to resolve this when loading your prims, documented in the general server commands section. (load-xml2 <filename> -newUID). But if this does not work, the other way is to shift-copy your build and drag it up into the air.. then delete the one in the air, leaving the "original" (which is actually the copy). This will generate new UID's on all your prims.. you can now leave that build, and load your original load-xml2 file in another region.

MySQL connection errors after about 6-8 hours

MySQL has a timeout which drops the connection after 28,800 seconds of inactivity. So increase this to 31536000. Using set global wait_timeout=31536000; from the mysql console if you get these erros.

System.DllNotFoundException: gdiplus.dll

First, check to make sure that libgdiplus.so is known to the dynamic linker:

/sbin/ldconfig -p | grep libgdiplus

If nothing is found, make sure that the directory libgdiplus.so exists in is either in your LD_LIBRARY_PATH environment variable or listed in a *.conf file (e.g., gdiplus.conf) in /etc/ld.so.conf.d/. Then run ldconfig to update the cache. Then it should be able to find the library.

You may still have the above error, however, since libgdiplus also depends on other dynamic libraries, and if they fail to load, libgdiplus will fail. To test for this, run OpenSim with debugging information turned on:

MONO_LOG_LEVEL=debug mono OpenSim.exe

It may show errors loading other libraries, like libexif.so.9. In that case, linking to an existing version of the offending library may work:

ln -s libexif.so.12 libexif.so.9

(Is there a cleaner solution than this?) (Isn't this backwards shouldn't be 'ln -s libexif.so.9 libexif.so.12'))

The assembly mscorlib.dll was not found or could not be loaded

This indicates that you are missing one of the mscor libs that comes with nant. This is easily solved by getting NAnt, which comes with both versions 1.0 and 2.0 of the required lib.

apt-get install nant

External Program Failed: /usr/lib/pkgconfig/../../lib/mono/2.0/gmcs.exe

This is quickly fixed by retrieving mono-gmcs.

apt-get install mono-gmcs

The type or namespace name JScript does not exist in the namespace Microsoft

Note that it says Jscript over and over again. Hint perhaps?

apt-get install mono-mjs libmono-microsoft8.0-cil

The type or namespace name Tcp does not exist in the namespace System.Runtime.Remoting.Channels

This one is taken care of with a quick install:

apt-get install libmono-system-runtime2.0-cil

error while loading shared libraries: libgthread-2.0.so.0: cannot open shared object file

If you start with a base Debian system as we did at the top of the page, but instead of using the apt version of mono you use the installer from their website, then you may encounter this issue.

After getting the .bin file from http://www.mono-project.com/Downloads, and executing it as per its instructions, upon finishing, you may find that if you try to run `mono --version` you are presented with this message. This one means you need to install libglib2.0-0.

apt-get install libglib2.0-0

The current runtime framework 'mono-2.0' is not correctly configured in the NAnt configuration file.

This one seems to be fixed by retrieving the apt version of nant.

apt-get install nant

This can also be due to pkg-config not being able to locate the mono.pc file. Adding the directory containing this file to the environment variable PKG_CONFIG_PATH may solve this.