[Opensim-users] Problem with Port not being found
Ursula MATOVA
ursula.matova at klintcentral.net
Sat Jan 16 00:16:56 UTC 2010
You're welcome, just let me know if it help :D
Regards,
Ursula.
Le 16 janv. 10 à 01:11, Jane Foxclaw a écrit :
> That is awesome.. cool.. THANK you soo much.. :)
>
> Sonya
>
> On Fri, Jan 15, 2010 at 6:38 PM, Ursula MATOVA <ursula.matova at klintcentral.net
> > wrote:
> Hey Sonya,
>
> Here are my own UserServer_Config.xml & MessagingServer_Config.xml ...
> I cannot explain where they are from because I use them for such a
> long time in grid mode ... :D
>
> UserServer_Config.xml :
>
> <Root>
> <Config default_startup_message="Welcome to OpenSim"
> default_grid_server="http://SERVERIP:8003/" grid_send_key="null"
> grid_recv_key="null" default_inventory_server="http://SERVERIP:
> 8003/" database_provider="OpenSim.Data.MySQL.dll"
> database_connect="Data Source=DBSERVERIP;Database=DBNAME;User
> ID=DBUSER;Password=DBPASSWD;" http_port="8002" http_ssl="False"
> default_X="1000" default_Y="1000" enable_llsd_login="True"
> default_loginLevel="0" library_location="/OPENSIM/ASSETS/inventory/
> Libraries.xml" default_authentication_server="http://SERVERIP:8002/"
> enable_hg_login="false" console_user="" console_pass="" />
> </Root>
>
>
> MessagingServer_Config.xml :
>
> <Root>
> <Config default_user_server="http://SERVERIP:8002/"
> user_send_key="null" user_recv_key="null" default_grid_server="http://SERVERIP:8003/
> " grid_send_key="null" grid_recv_key="null" database_connect="Data
> Source=DBSERVERIP;Database=DBNAME;User ID=DBUSER;Password=DBPASSWD;"
> database_provider="OpenSim.Data.MySQL.dll"
> region_comms_provider="OpenSim.Region.Communications.OGS1.dll"
> http_port="8006" http_ssl="False" published_ip="SERVERIP"
> console_user="" console_pass="" />
> </Root>
>
> Hope this will help
>
> Replace SERVERIP, DBSERVERIP, DBUSER, DBPASSWD and DBNAME by your
> own ...
> NOTE: I never use 127.0.0.1 as SERVERIP ... Maybe it's a mistake,
> but it's always working nice in my case ... :D
>
> Regards,
> Ursula.
>
> Le 15 janv. 10 à 15:06, Jane Foxclaw a écrit :
>
>> ok that probably was the problem. UserServer_Config.xml. I don't
>> know where that or the other file, MessagingServer_Config.xml, is
>> kept. Any ideas ? Also where are the SQL databases kept ? I use
>> MySQL.
>> Sonya
>>
>>
>> On Fri, Jan 15, 2010 at 1:30 AM, Ursula MATOVA <ursula.matova at klintcentral.net
>> > wrote:
>> Hi Jane,
>>
>> First: What about the content of UserServer_Config.xml ?
>> ( Same for MessagingServer_Config.xml )
>>
>> Second: When in Grid mode you need to start the UserServer first,
>> then ROBUST then the MessagingServer and finally the RegionServer
>>
>> OpenSim.Grid.UserServer.exe
>> OpenSim.Server.exe
>> OpenSim.Grid.MessagingServer.exe
>> OpenSim.exe
>>
>> Another idea : try to disable SessionAuthentication for now in
>> "OpenSim.Server.ini" file :
>>
>>> SessionAuthentication = "false"
>>
>>
>> AND
>>
>> Better to start with
>>
>>> grid_send_key = "null"
>> grid_recv_key = "null"
>> user_send_key = "null"
>> user_recv_key = "null"
>>
>> in your OpenSim.ini config file.
>>
>>
>> Regards,
>> Ursula.
>>
>>
>> Le 14 janv. 10 à 18:53, Jane Foxclaw a écrit :
>>
>>> Ok, I am submitting this to see what you all think, because I am
>>> trying to run it in Grid Mode, with HyperGrid so that I can log
>>> other regions into it. Its on Linux and all ports are open. We
>>> have tested stand alone and it works fine. but now we are trying
>>> to solve this when we started over from scratch on how to get the
>>> UserServer to be seen by the MessagingServer.
>>>
>>> THE ERROR
>>> ----------------------------------------------
>>> 20:18:12 - [SERVER]: Unable to connect to server http://173.212.195.224:8002/
>>> for registration. User service not running? Exception Error:
>>> ConnectFailure at System.Net.HttpWebRequest.EndGetRequestStream
>>> (IAsyncResult asyncResult) [0x00000]
>>> at System.Net.HttpWebRequest.GetRequestStream () [0x00000]
>>> at Nwc.XmlRpc.XmlRpcRequest.Send (System.String url, Int32
>>> timeout) [0x00000]
>>> at Nwc.XmlRpc.XmlRpcRequest.Invoke (System.String url) [0x00000]
>>> at
>>> OpenSim
>>> .Grid
>>> .MessagingServer
>>> .Modules.InterMessageUserServerModule.registerWithUserServer ()
>>> [0x00000]
>>> ----------------------------------------------
>>>
>>> OpenSim.ini file port settings
>>> ----------------------------------------------
>>> [Network]
>>> ConsoleUser = "Test"
>>> ConsolePass = "secret"
>>> http_listener_port = 9000
>>> default_location_x = 1000
>>> default_location_y = 1000
>>>
>>> ; ssl config: Experimental! The auto https config only really
>>> works definately on windows XP now
>>> ; you need a Cert Request/Signed pair installed in the MY
>>> store with the CN specified below
>>> ; you can use https on other platforms, but you'll need to
>>> configure the httpapi yourself for now
>>> http_listener_ssl = false ; Also create a SSL server
>>> http_listener_cn = "localhost" ; Use the cert with the common
>>> name
>>> http_listener_sslport = 9001 ; Use this port for SSL connections
>>> http_listener_ssl_cert = "" ; Currently unused, but will be
>>> used for OSHttpServer
>>>
>>> ; Hostname to use in llRequestURL/llRequestSecureURL
>>> ; if not defined - default machine name is being used
>>> ; (on Windows this mean NETBIOS name - useably only inside
>>> local network)
>>> ; ExternalHostNameForLSL=127.0.0.1
>>> ; Uncomment below to enable llRemoteData/remote channels
>>> ; remoteDataPort = 20800
>>>
>>> grid_server_url = "http://173.212.195.224:8003"
>>> grid_send_key = "1234"
>>> grid_recv_key = "1234"
>>>
>>> user_server_url = "http://173.212.195.224:8002"
>>> user_send_key = "1234"
>>> user_recv_key = "1234"
>>>
>>> asset_server_url = "http://173.212.195.224:8003"
>>>
>>> inventory_server_url = "http://173.212.195.224:8003"
>>>
>>> ; The MessagingServer is a companion of the UserServer. It uses
>>> ; user_send_key and user_recv_key, too
>>> messaging_server_url = "http://173.212.195.224:8006"
>>>
>>> ; What is reported as the "X-Secondlife-Shard"
>>> ; Defaults to the user server url if not set
>>> ; The old default is "OpenSim", set here fro compatibility
>>> shard = "OpenSim"
>>> ------------------------------------------------------
>>>
>>> OpenSim.Server.ini settings
>>> ------------------------------------------------------
>>> ; * The startup section lists all the connectors to start up in
>>> this server
>>> ; * instance. This may be only one, or it may be the entire server
>>> suite.
>>> ; * Multiple connectors should be seaprated by commas.
>>> ; *
>>> ; * These are the IN connectors the server uses, the in connectors
>>> ; * read this config file and load the needed OUT and database
>>> connectors
>>> ; *
>>> ; * Add
>>> "OpenSim.Server.Handlers.dll:AuthenticationServiceConnector" to
>>> ; * enable the experimental authentication service
>>> ; *
>>> [Startup]
>>> ServiceConnectors =
>>> "OpenSim
>>> .Server
>>> .Handlers
>>> .dll:AssetServiceConnector
>>> ,OpenSim
>>> .Server
>>> .Handlers
>>> .dll:InventoryServiceInConnector
>>> ,OpenSim
>>> .Server
>>> .Handlers
>>> .dll:FreeswitchServerConnector
>>> ,OpenSim.Server.Handlers.dll:GridServiceConnector"
>>>
>>> ; * This is common for all services, it's the network setup for
>>> the entire
>>> ; * server instance
>>> ; *
>>> [Network]
>>> port = 8003
>>>
>>> ; * The following are for the remote console
>>> ; * They have no effect for the local or basic console types
>>> ; * Leave commented to diable logins to the console
>>> ;ConsoleUser = Test
>>> ;ConsolePass = secret
>>>
>>> ; * As an example, the below configuration precisely mimicks the
>>> legacy
>>> ; * asset server. It is read by the asset IN connector (defined
>>> above)
>>> ; * and it then loads the OUT connector (a local database module).
>>> That,
>>> ; * in turn, reads the asset loader and database connection
>>> information
>>> ; *
>>> [AssetService]
>>> LocalServiceModule =
>>> "OpenSim.Services.AssetService.dll:AssetService"
>>> DefaultAssetLoader = "OpenSim.Framework.AssetLoader.Filesystem.dll"
>>> AssetLoaderArgs = "assets/AssetSets.xml"
>>> StorageProvider = "OpenSim.Data.MySQL.dll"
>>> ConnectionString ="Data Source=localhost;Database=opensim;User
>>> ID=root;Password=I have put one here;";
>>>
>>> ; * This configuration loads the inventory server modules. It
>>> duplicates
>>> ; * the function of the legacy inventory server
>>> ; *
>>> [InventoryService]
>>> LocalServiceModule =
>>> "OpenSim.Services.InventoryService.dll:InventoryService"
>>> UserServerURI = "http://173.212.195.224:8002"
>>> SessionAuthentication = "true"
>>> StorageProvider = "OpenSim.Data.MySQL.dll"
>>> ConnectionString ="Data Source=localhost;Database=opensim;User
>>> ID=root;Password=I have put one here;";
>>>
>>> ; * This is the configuration for the freeswitch server in grid mode
>>> [FreeswitchService]
>>> LocalServiceModule =
>>> "OpenSim.Services.FreeswitchService.dll:FreeswitchService"
>>>
>>> ; * This is the new style authentication service. Currently, only
>>> MySQL
>>> ; * is implemented. "Realm" is the table that is used for user
>>> lookup.
>>> ; * By setting it to "users", you can use the old style users table
>>> ; * as an authentication source.
>>> ; *
>>> [AuthenticationService]
>>> AuthenticationServiceModule =
>>> "OpenSim
>>> .Services.AuthenticationService.dll:PasswordAuthenticationService"
>>> StorageProvider = "OpenSim.Data.MySQL.dll"
>>> ConnectionString ="Data Source=localhost;Database=opensim;User
>>> ID=root;Password=I have put one here;";
>>> ; Realm = "users"
>>>
>>> ; * This is the new style user service.
>>> ; * "Realm" is the table that is used for user lookup.
>>> ; * It defaults to "users", which uses the legacy tables
>>> ; *
>>> [UserAccountService]
>>> AuthenticationServiceModule =
>>> "OpenSim.Services.UserService.dll:UserAccountService"
>>> StorageProvider = "OpenSim.Data.MySQL.dll"
>>> ConnectionString ="Data Source=localhost;Database=opensim;User
>>> ID=root;Password=I have put one here;";
>>> ; Realm = "users"
>>>
>>> ; * This is the new style grid service.
>>> ; * "Realm" is the table that is used for user lookup.
>>> ; * It defaults to "regions", which uses the legacy tables
>>> ; *
>>> [GridService]
>>> LocalServiceModule = "OpenSim.Services.GridService.dll:GridService"
>>> StorageProvider = "OpenSim.Data.MySQL.dll:MySqlRegionData"
>>> ConnectionString ="Data Source=localhost;Database=opensim;User
>>> ID=root;Password=I have put one here;";
>>> Realm = "regions"
>>> ----------------------------------------------------
>>>
>>> GridCommon.ini settings
>>> --------------------------------------------------
>>> [AssetService]
>>>
>>> DefaultAssetLoader =
>>> "OpenSim.Framework.AssetLoader.Filesystem.dll"
>>> AssetLoaderArgs = "assets/AssetSets.xml"
>>>
>>> ;
>>> ; change this to your grid-wide asset server
>>> ;
>>> AssetServerURI = "http://173.212.195.224:8003"
>>>
>>>
>>> [InventoryService]
>>> ;
>>> ; change this to your grid-wide inventory server
>>> ;
>>> InventoryServerURI = "http://173.212.195.224:8003"
>>>
>>> [GridService]
>>> ;
>>> ; change this to your grid-wide grid server
>>> ;
>>> GridServerURI = "http://173.212.195.224:8003"
>>>
>>> [Modules]
>>> ;; Choose 0 or 1 cache modules, and the corresponding config
>>> file, if it exists.
>>> ;; Copy the config .example file into your own .ini file and
>>> change configs there
>>>
>>> AssetCaching = "FlotsamAssetCache"
>>> Include-FlotsamCache = "config-include/FlotsamCache.ini"
>>>
>>> ;AssetCaching = "CenomeMemoryAssetCache"
>>> ;Include-CenomeCache = "config-include/CenomeCache.ini"
>>>
>>> ;AssetCaching = "GlynnTuckerAssetCache"
>>>
>>> ;; Optionally, the port for the LLProxyLoginModule module can
>>> be changed
>>>
>>> ;Setup_LLProxyLoginModule = "9090/"
>>> ------------------------------------------------------------------------
>>>
>>> I have set this up according to the OpenSimulator Grid tutorials.
>>> but they are not finished it seems. Any ideas ?
>>>
>>> Sonya
>>> _______________________________________________
>>> Opensim-users mailing list
>>> Opensim-users at lists.berlios.de
>>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>
>>
>> _______________________________________________
>> Opensim-users mailing list
>> Opensim-users at lists.berlios.de
>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>
>>
>> _______________________________________________
>> Opensim-users mailing list
>> Opensim-users at lists.berlios.de
>> https://lists.berlios.de/mailman/listinfo/opensim-users
>
>
> _______________________________________________
> Opensim-users mailing list
> Opensim-users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/opensim-users
>
>
> _______________________________________________
> Opensim-users mailing list
> Opensim-users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/opensim-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://opensimulator.org/pipermail/opensim-users/attachments/20100116/7f9a720f/attachment.html>
More information about the Opensim-users
mailing list