[Opensim-users] Problem with Port not being found
Jane Foxclaw
janefoxclaw at gmail.com
Sat Jan 16 00:11:13 UTC 2010
That is awesome.. cool.. THANK you soo much.. :)
Sonya
On Fri, Jan 15, 2010 at 6:38 PM, Ursula MATOVA <
ursula.matova at klintcentral.net> wrote:
> Hey Sonya,
>
> Here are my own UserServer_Config.xml & MessagingServer_Config.xml ...
> I cannot explain where they are from because I use them for such a long
> time in grid mode ... :D
>
> UserServer_Config.xml :
>
> <Root>
> <Config default_startup_message="Welcome to OpenSim"
> default_grid_server="http://SERVERIP:8003/" grid_send_key="null"
> grid_recv_key="null" default_inventory_server="http://SERVERIP:8003/"
> database_provider="OpenSim.Data.MySQL.dll" database_connect="Data
> Source=DBSERVERIP;Database=DBNAME;User ID=DBUSER;Password=DBPASSWD;"
> http_port="8002" http_ssl="False" default_X="1000" default_Y="1000"
> enable_llsd_login="True" default_loginLevel="0"
> library_location="/OPENSIM/ASSETS/inventory/Libraries.xml"
> default_authentication_server="http://SERVERIP:8002/"
> enable_hg_login="false" console_user="" console_pass="" />
> </Root>
>
>
> MessagingServer_Config.xml :
>
> <Root>
> <Config default_user_server="http://SERVERIP:8002/" user_send_key="null"
> user_recv_key="null" default_grid_server="http://SERVERIP:8003/"
> grid_send_key="null" grid_recv_key="null" database_connect="Data
> Source=DBSERVERIP;Database=DBNAME;User ID=DBUSER;Password=DBPASSWD;"
> database_provider="OpenSim.Data.MySQL.dll"
> region_comms_provider="OpenSim.Region.Communications.OGS1.dll"
> http_port="8006" http_ssl="False" published_ip="SERVERIP" console_user=""
> console_pass="" />
> </Root>
>
> Hope this will help
>
> Replace SERVERIP, DBSERVERIP, DBUSER, DBPASSWD and DBNAME by your own ...
> NOTE: I never use 127.0.0.1 as SERVERIP ... Maybe it's a mistake, but it's
> always working nice in my case ... :D
>
> Regards,
> Ursula.
>
> Le 15 janv. 10 à 15:06, Jane Foxclaw a écrit :
>
> ok that probably was the problem. UserServer_Config.xml. I don't know where
> that or the other file, MessagingServer_Config.xml, is kept. Any ideas ?
> Also where are the SQL databases kept ? I use MySQL.
> Sonya
>
>
> On Fri, Jan 15, 2010 at 1:30 AM, Ursula MATOVA <
> ursula.matova at klintcentral.net> wrote:
>
>> Hi Jane,
>>
>> First: What about the content of UserServer_Config.xml ?
>> ( Same for MessagingServer_Config.xml )
>>
>> Second: When in Grid mode you need to start the UserServer first, then
>> ROBUST then the MessagingServer and finally the RegionServer
>>
>> OpenSim.Grid.UserServer.exe
>> OpenSim.Server.exe
>> OpenSim.Grid.MessagingServer.exe
>> OpenSim.exe
>>
>> Another idea : try to disable SessionAuthentication for now in
>> "OpenSim.Server.ini" file :
>>
>> SessionAuthentication = "false"
>>
>>
>> AND
>>
>> Better to start with
>>
>> grid_send_key = "null"
>>
>> grid_recv_key = "null"
>> user_send_key = "null"
>> user_recv_key = "null"
>>
>> in your OpenSim.ini config file.
>>
>>
>> Regards,
>> Ursula.
>>
>>
>> Le 14 janv. 10 à 18:53, Jane Foxclaw a écrit :
>>
>> Ok, I am submitting this to see what you all think, because I am trying to
>> run it in Grid Mode, with HyperGrid so that I can log other regions into it.
>> Its on Linux and all ports are open. We have tested stand alone and it works
>> fine. but now we are trying to solve this when we started over from scratch
>> on how to get the UserServer to be seen by the MessagingServer.
>>
>> THE ERROR
>> ----------------------------------------------
>> 20:18:12 - [SERVER]: Unable to connect to server
>> http://173.212.195.224:8002/ for registration. User service not running?
>> Exception Error: ConnectFailure at
>> System.Net.HttpWebRequest.EndGetRequestStream (IAsyncResult asyncResult)
>> [0x00000]
>> at System.Net.HttpWebRequest.GetRequestStream () [0x00000]
>> at Nwc.XmlRpc.XmlRpcRequest.Send (System.String url, Int32 timeout)
>> [0x00000]
>> at Nwc.XmlRpc.XmlRpcRequest.Invoke (System.String url) [0x00000]
>> at
>> OpenSim.Grid.MessagingServer.Modules.InterMessageUserServerModule.registerWithUserServer
>> () [0x00000]
>> ----------------------------------------------
>>
>> OpenSim.ini file port settings
>> ----------------------------------------------
>> [Network]
>> ConsoleUser = "Test"
>> ConsolePass = "secret"
>> http_listener_port = 9000
>> default_location_x = 1000
>> default_location_y = 1000
>>
>> ; ssl config: Experimental! The auto https config only really works
>> definately on windows XP now
>> ; you need a Cert Request/Signed pair installed in the MY store with
>> the CN specified below
>> ; you can use https on other platforms, but you'll need to configure
>> the httpapi yourself for now
>> http_listener_ssl = false ; Also create a SSL server
>> http_listener_cn = "localhost" ; Use the cert with the common name
>> http_listener_sslport = 9001 ; Use this port for SSL connections
>> http_listener_ssl_cert = "" ; Currently unused, but will be used for
>> OSHttpServer
>>
>> ; Hostname to use in llRequestURL/llRequestSecureURL
>> ; if not defined - default machine name is being used
>> ; (on Windows this mean NETBIOS name - useably only inside local
>> network)
>> ; ExternalHostNameForLSL=127.0.0.1
>> ; Uncomment below to enable llRemoteData/remote channels
>> ; remoteDataPort = 20800
>>
>> grid_server_url = "http://173.212.195.224:8003"
>> grid_send_key = "1234"
>> grid_recv_key = "1234"
>>
>> user_server_url = "http://173.212.195.224:8002"
>> user_send_key = "1234"
>> user_recv_key = "1234"
>>
>> asset_server_url = "http://173.212.195.224:8003"
>>
>> inventory_server_url = "http://173.212.195.224:8003"
>>
>> ; The MessagingServer is a companion of the UserServer. It uses
>> ; user_send_key and user_recv_key, too
>> messaging_server_url = "http://173.212.195.224:8006"
>>
>> ; What is reported as the "X-Secondlife-Shard"
>> ; Defaults to the user server url if not set
>> ; The old default is "OpenSim", set here fro compatibility
>> shard = "OpenSim"
>> ------------------------------------------------------
>>
>> OpenSim.Server.ini settings
>> ------------------------------------------------------
>> ; * The startup section lists all the connectors to start up in this
>> server
>> ; * instance. This may be only one, or it may be the entire server suite.
>> ; * Multiple connectors should be seaprated by commas.
>> ; *
>> ; * These are the IN connectors the server uses, the in connectors
>> ; * read this config file and load the needed OUT and database connectors
>> ; *
>> ; * Add "OpenSim.Server.Handlers.dll:AuthenticationServiceConnector" to
>> ; * enable the experimental authentication service
>> ; *
>> [Startup]
>> ServiceConnectors =
>> "OpenSim.Server.Handlers.dll:AssetServiceConnector,OpenSim.Server.Handlers.dll:InventoryServiceInConnector,OpenSim.Server.Handlers.dll:FreeswitchServerConnector,OpenSim.Server.Handlers.dll:GridServiceConnector"
>>
>> ; * This is common for all services, it's the network setup for the entire
>> ; * server instance
>> ; *
>> [Network]
>> port = 8003
>>
>> ; * The following are for the remote console
>> ; * They have no effect for the local or basic console types
>> ; * Leave commented to diable logins to the console
>> ;ConsoleUser = Test
>> ;ConsolePass = secret
>>
>> ; * As an example, the below configuration precisely mimicks the legacy
>> ; * asset server. It is read by the asset IN connector (defined above)
>> ; * and it then loads the OUT connector (a local database module). That,
>> ; * in turn, reads the asset loader and database connection information
>> ; *
>> [AssetService]
>> LocalServiceModule = "OpenSim.Services.AssetService.dll:AssetService"
>> DefaultAssetLoader = "OpenSim.Framework.AssetLoader.Filesystem.dll"
>> AssetLoaderArgs = "assets/AssetSets.xml"
>> StorageProvider = "OpenSim.Data.MySQL.dll"
>> ConnectionString ="Data Source=localhost;Database=opensim;User
>> ID=root;Password=I have put one here;";
>>
>> ; * This configuration loads the inventory server modules. It duplicates
>> ; * the function of the legacy inventory server
>> ; *
>> [InventoryService]
>> LocalServiceModule =
>> "OpenSim.Services.InventoryService.dll:InventoryService"
>> UserServerURI = "http://173.212.195.224:8002"
>> SessionAuthentication = "true"
>> StorageProvider = "OpenSim.Data.MySQL.dll"
>> ConnectionString ="Data Source=localhost;Database=opensim;User
>> ID=root;Password=I have put one here;";
>>
>> ; * This is the configuration for the freeswitch server in grid mode
>> [FreeswitchService]
>> LocalServiceModule =
>> "OpenSim.Services.FreeswitchService.dll:FreeswitchService"
>>
>> ; * This is the new style authentication service. Currently, only MySQL
>> ; * is implemented. "Realm" is the table that is used for user lookup.
>> ; * By setting it to "users", you can use the old style users table
>> ; * as an authentication source.
>> ; *
>> [AuthenticationService]
>> AuthenticationServiceModule =
>> "OpenSim.Services.AuthenticationService.dll:PasswordAuthenticationService"
>> StorageProvider = "OpenSim.Data.MySQL.dll"
>> ConnectionString ="Data Source=localhost;Database=opensim;User
>> ID=root;Password=I have put one here;";
>> ; Realm = "users"
>>
>> ; * This is the new style user service.
>> ; * "Realm" is the table that is used for user lookup.
>> ; * It defaults to "users", which uses the legacy tables
>> ; *
>> [UserAccountService]
>> AuthenticationServiceModule =
>> "OpenSim.Services.UserService.dll:UserAccountService"
>> StorageProvider = "OpenSim.Data.MySQL.dll"
>> ConnectionString ="Data Source=localhost;Database=opensim;User
>> ID=root;Password=I have put one here;";
>> ; Realm = "users"
>>
>> ; * This is the new style grid service.
>> ; * "Realm" is the table that is used for user lookup.
>> ; * It defaults to "regions", which uses the legacy tables
>> ; *
>> [GridService]
>> LocalServiceModule = "OpenSim.Services.GridService.dll:GridService"
>> StorageProvider = "OpenSim.Data.MySQL.dll:MySqlRegionData"
>> ConnectionString ="Data Source=localhost;Database=opensim;User
>> ID=root;Password=I have put one here;";
>> Realm = "regions"
>> ----------------------------------------------------
>>
>> GridCommon.ini settings
>> --------------------------------------------------
>> [AssetService]
>>
>> DefaultAssetLoader = "OpenSim.Framework.AssetLoader.Filesystem.dll"
>> AssetLoaderArgs = "assets/AssetSets.xml"
>>
>> ;
>> ; change this to your grid-wide asset server
>> ;
>> AssetServerURI = "http://173.212.195.224:8003"
>>
>>
>> [InventoryService]
>> ;
>> ; change this to your grid-wide inventory server
>> ;
>> InventoryServerURI = "http://173.212.195.224:8003"
>>
>> [GridService]
>> ;
>> ; change this to your grid-wide grid server
>> ;
>> GridServerURI = "http://173.212.195.224:8003"
>>
>> [Modules]
>> ;; Choose 0 or 1 cache modules, and the corresponding config file, if
>> it exists.
>> ;; Copy the config .example file into your own .ini file and change
>> configs there
>>
>> AssetCaching = "FlotsamAssetCache"
>> Include-FlotsamCache = "config-include/FlotsamCache.ini"
>>
>> ;AssetCaching = "CenomeMemoryAssetCache"
>> ;Include-CenomeCache = "config-include/CenomeCache.ini"
>>
>> ;AssetCaching = "GlynnTuckerAssetCache"
>>
>> ;; Optionally, the port for the LLProxyLoginModule module can be
>> changed
>>
>> ;Setup_LLProxyLoginModule = "9090/"
>> ------------------------------------------------------------------------
>>
>> I have set this up according to the OpenSimulator Grid tutorials. but they
>> are not finished it seems. Any ideas ?
>>
>> Sonya
>> _______________________________________________
>> Opensim-users mailing list
>> Opensim-users at lists.berlios.de
>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>
>>
>>
>> _______________________________________________
>> Opensim-users mailing list
>> Opensim-users at lists.berlios.de
>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>
>>
> _______________________________________________
> Opensim-users mailing list
> Opensim-users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/opensim-users
>
>
>
> _______________________________________________
> Opensim-users mailing list
> Opensim-users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/opensim-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://opensimulator.org/pipermail/opensim-users/attachments/20100115/1567ce84/attachment.html>
More information about the Opensim-users
mailing list