[Opensim-users] Hypergrid: incompatible coordinates

[Paul Fishwick]

the diva distro works well. However, I also see the details of the
problem with the HG-enabled opensim that I made:

  1) enabled HG standalone on HOME machine
  2) launch viewer on this standalone and verify that "home" is 
currently set
  3) WORLD->Teleport Home. Works fine, and I am teleported correctly.
  4) do a "link-region..." to WORK-IP
  5) step #4 works fine and the linked region shows in map
  6) try #3 again and it fails with [Hgrid] saying that it thinks that 
home is on WORK-IP

the error from HG is:

 [Hgrid]: Local user is going to foreign region or foreign user is going 
elsewhere
 --------------- Home -----------------
 <WORK-IP is listed here> along with the UUID and port

Does HG look for home other than how it is set via the viewer? I've 
tried with 2 or 3
viewers, cleaning cache, but to no avail. As soon as I do 
"link-region...", "home"
is reset and so Teleport-Home fails.

-p


diva at metaverseink.com wrote:
> If it doesn't work it's either because (1) the home region isn't set; or 
> (2) the departing sim's http port is behind a firewall, therefore the 
> receiving sim is not able to verify the session; or (3) the user 
> information in the DB is wrong; or (4) miscellaneous configuration bugs.
>
> Hence the reason for me to make the diva distro: 3 and 4 are eliminated.
>
> Paul Fishwick wrote:
>   
>> On the work unix machine, there are no blocked ports. On the home pc 
>> machine, the usual
>> incoming ports are open (9000 through 9010, 8000 through 8010) and both 
>> work and home
>> opensims can be accessed via the SL viewer using the FQDN fine when not 
>> using the
>> HG architecture (i.e., when using regular standalone). Is there a 
>> particular port or port range
>> that HG uses, not used in standalone? Perhaps I have not opened up 
>> everything I need to
>> for HG.
>> -p
>>
>> diva at metaverseink.com wrote:
>>     
>>> Ports blocked on firewall.
>>>
>>> Paul Fishwick wrote:
>>>       
>>>> diva at metaverseink.com wrote:
>>>>         
>>>>> Paul Fishwick wrote:
>>>>>  
>>>>>           
>>>>>> It has public access ("Allow Public Access" is set in 
>>>>>> Region/Estate). However, it also has the
>>>>>> defaultpermissionsmodule, so does one need to disable permissions 
>>>>>> (username, password) to
>>>>>> get hypergrid TPs to work?
>>>>>>     
>>>>>>             
>>>>> No. I though you were saying you have an access list in that sim.
>>>>> Permissions work exactly the same way in HG and non-HG.
>>>>>
>>>>> I don't know in which way you are failing to TP. It may be that you 
>>>>> don't have your home region set. You cannot HG TP around without a 
>>>>> home region. For setting a home region, you need to set it, logout, 
>>>>> and then login again, or the viewer's cache will get in the way.
>>>>>   
>>>>>           
>>>> I went back temporarily to the regular standalone architecture for
>>>> the two opensim installations - we'll call them  HOME and WORK. I 
>>>> verified in each that
>>>> a home was set, since I could do "Teleport Home" in each, an it 
>>>> worked fine. I also,
>>>> in each, set "accounts_authenticate = false" since this would appear 
>>>> to be necessary for
>>>> HG? In any case, I can login as anyone and yet the permissions module 
>>>> is enabled so only
>>>> the master user can edit/create on the land. So far, so good.
>>>>
>>>> Now, that I know that accounts_authenticate is turned off and that 
>>>> each opensim
>>>> has a home region set, I turned back on the hypergrid setting under 
>>>> [Architecture] for both
>>>> HOME and WORK.
>>>>
>>>> At HOME, I did link-region 1000 1000 <WORK IP> 9000 local
>>>>
>>>> this fails to get the map image, but correctly links in the WORK 
>>>> opensim at 1000, 1000.
>>>> I can see the grey square at the 1000,1000 location in the map.
>>>> With the hypergrid, back on, I am unable to "Teleport Home" let alone 
>>>> teleport to 'local'
>>>> by clicking on the grey square and trying to teleport there. When I 
>>>> try "Teleport Home", it
>>>> is attempting to teleport to WORK's home since I can see this in 
>>>> WORK's opensim log, when
>>>> it should be trying to teleport to HOME's home.
>>>>
>>>> In any event, I get [Hgrid]: Access denied to foreign user on the 
>>>> WORK log screen.
>>>>
>>>> I realize I must be missing another essential step or setting. Thoughts?
>>>>
>>>> -p
>>>>
>>>>
>>>>
>>>>
>>>>         
>>>>> _______________________________________________
>>>>> Opensim-users mailing list
>>>>> Opensim-users at lists.berlios.de
>>>>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>>>>
>>>>>   
>>>>>           
>>>>         
>>     
> _______________________________________________
> Opensim-users mailing list
> Opensim-users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/opensim-users
>
>   


-- 
Paul Fishwick, PhD
Professor
University of Florida
CISE Department, CSE 301
Gainesville, FL 32611
Email: fishwick at cise.ufl.edu
Web: http://www.cise.ufl.edu/~fishwick