[Opensim-users] Hypergrid: incompatible coordinates

[diva at metaverseink.com]

Your problem is (4): miscellaneous configuration bugs.
Specifically I have a feeling you have the exact same UUID for both 
regions. If you're not careful with UUIDs being unique, all sorts of 
strange things can happen.

Paul Fishwick wrote:
> the diva distro works well. However, I also see the details of the
> problem with the HG-enabled opensim that I made:
> 
>  1) enabled HG standalone on HOME machine
>  2) launch viewer on this standalone and verify that "home" is currently 
> set
>  3) WORLD->Teleport Home. Works fine, and I am teleported correctly.
>  4) do a "link-region..." to WORK-IP
>  5) step #4 works fine and the linked region shows in map
>  6) try #3 again and it fails with [Hgrid] saying that it thinks that 
> home is on WORK-IP
> 
> the error from HG is:
> 
> [Hgrid]: Local user is going to foreign region or foreign user is going 
> elsewhere
> --------------- Home -----------------
> <WORK-IP is listed here> along with the UUID and port
> 
> Does HG look for home other than how it is set via the viewer? I've 
> tried with 2 or 3
> viewers, cleaning cache, but to no avail. As soon as I do 
> "link-region...", "home"
> is reset and so Teleport-Home fails.
> 
> -p
> 
> 
> diva at metaverseink.com wrote:
>> If it doesn't work it's either because (1) the home region isn't set; 
>> or (2) the departing sim's http port is behind a firewall, therefore 
>> the receiving sim is not able to verify the session; or (3) the user 
>> information in the DB is wrong; or (4) miscellaneous configuration bugs.
>>
>> Hence the reason for me to make the diva distro: 3 and 4 are eliminated.
>>
>> Paul Fishwick wrote:
>>  
>>> On the work unix machine, there are no blocked ports. On the home pc 
>>> machine, the usual
>>> incoming ports are open (9000 through 9010, 8000 through 8010) and 
>>> both work and home
>>> opensims can be accessed via the SL viewer using the FQDN fine when 
>>> not using the
>>> HG architecture (i.e., when using regular standalone). Is there a 
>>> particular port or port range
>>> that HG uses, not used in standalone? Perhaps I have not opened up 
>>> everything I need to
>>> for HG.
>>> -p
>>>
>>> diva at metaverseink.com wrote:
>>>    
>>>> Ports blocked on firewall.
>>>>
>>>> Paul Fishwick wrote:
>>>>      
>>>>> diva at metaverseink.com wrote:
>>>>>        
>>>>>> Paul Fishwick wrote:
>>>>>>  
>>>>>>          
>>>>>>> It has public access ("Allow Public Access" is set in 
>>>>>>> Region/Estate). However, it also has the
>>>>>>> defaultpermissionsmodule, so does one need to disable permissions 
>>>>>>> (username, password) to
>>>>>>> get hypergrid TPs to work?
>>>>>>>                 
>>>>>> No. I though you were saying you have an access list in that sim.
>>>>>> Permissions work exactly the same way in HG and non-HG.
>>>>>>
>>>>>> I don't know in which way you are failing to TP. It may be that 
>>>>>> you don't have your home region set. You cannot HG TP around 
>>>>>> without a home region. For setting a home region, you need to set 
>>>>>> it, logout, and then login again, or the viewer's cache will get 
>>>>>> in the way.
>>>>>>             
>>>>> I went back temporarily to the regular standalone architecture for
>>>>> the two opensim installations - we'll call them  HOME and WORK. I 
>>>>> verified in each that
>>>>> a home was set, since I could do "Teleport Home" in each, an it 
>>>>> worked fine. I also,
>>>>> in each, set "accounts_authenticate = false" since this would 
>>>>> appear to be necessary for
>>>>> HG? In any case, I can login as anyone and yet the permissions 
>>>>> module is enabled so only
>>>>> the master user can edit/create on the land. So far, so good.
>>>>>
>>>>> Now, that I know that accounts_authenticate is turned off and that 
>>>>> each opensim
>>>>> has a home region set, I turned back on the hypergrid setting under 
>>>>> [Architecture] for both
>>>>> HOME and WORK.
>>>>>
>>>>> At HOME, I did link-region 1000 1000 <WORK IP> 9000 local
>>>>>
>>>>> this fails to get the map image, but correctly links in the WORK 
>>>>> opensim at 1000, 1000.
>>>>> I can see the grey square at the 1000,1000 location in the map.
>>>>> With the hypergrid, back on, I am unable to "Teleport Home" let 
>>>>> alone teleport to 'local'
>>>>> by clicking on the grey square and trying to teleport there. When I 
>>>>> try "Teleport Home", it
>>>>> is attempting to teleport to WORK's home since I can see this in 
>>>>> WORK's opensim log, when
>>>>> it should be trying to teleport to HOME's home.
>>>>>
>>>>> In any event, I get [Hgrid]: Access denied to foreign user on the 
>>>>> WORK log screen.
>>>>>
>>>>> I realize I must be missing another essential step or setting. 
>>>>> Thoughts?
>>>>>
>>>>> -p
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>        
>>>>>> _______________________________________________
>>>>>> Opensim-users mailing list
>>>>>> Opensim-users at lists.berlios.de
>>>>>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>>>>>
>>>>>>             
>>>>>         
>>>     
>> _______________________________________________
>> Opensim-users mailing list
>> Opensim-users at lists.berlios.de
>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>
>>   
> 
>