[Opensim-users] Hypergrid: incompatible coordinates

Kevin Buckley kevin at buckley70.freeserve.co.uk
Tue Nov 10 19:48:50 UTC 2009


That turned out to be my problem also (both using the default of 1000,
1000).  I changed one of them to 1100, 1100 and now it works just fine.
Interestingly, the single change of going from standalone to HGstandalone,
has also cured my grey AV, white hair/eyes problem.  I haven't tested this
'scientifically' but the single most likely change I made (apart from
setting hypergrid to true!) was to change all the grid server settings in
Opensim.ini from 127.0.0.1:800x to mydomain.com:xxxx (where xxxx is the port
number of each grid). - Regards, Kevin

-----Original Message-----
From: opensim-users-bounces at lists.berlios.de
[mailto:opensim-users-bounces at lists.berlios.de] On Behalf Of
diva at metaverseink.com
Sent: 10 November 2009 19:03
To: opensim-users at lists.berlios.de
Subject: Re: [Opensim-users] Hypergrid: incompatible coordinates


Not sure if this is your situation, but you cannot link regions that are 
on the exact same coordinates in different grids. The server better tell 
you that, instead of letting you do it and then you ending up with a 
client crash -- because the client gets all confused going from a 
machine in 1000,1000 to another machine in 1000,1000.

Paul Fishwick wrote:
> I haven't tried hypergrid in a while, but after several attempts, I am 
> running into a coordinates
> issue but it seems unrelated to the 4096 distance problem.  Here is the 
> setup: 64-bit Windows 7
> at home running opensim32bitlaunch and 64-bit Ubuntu at work. I am not 
> using the diva distribution,
> but hand-configured both home and work using the instructions:
> 
> http://opensimulator.org/wiki/Installing_and_Running_Hypergrid
>  
>  I successfully start up the home 2x2 opensim. Both home and work have 
> been configured as:
>  
>  1) [Network] variables configured to reflect the respective IPs
>  2) WorldMapModule = "WorldMap", WorldMapModule = "HGWorldMapModule",
>       and MapImageModule = "MapImageModule" are set
>  3) The [Architecture] is set to hypergrid standalone
>  4) 2x2 regions (with work being set as a megaregion)
>  5) the coordinates for both is 1000,1000 as the root
>  6) a home location (marker) is set in region 1000,1000 for both
> 
> the command from home is:   link-region 1004 1004 <workhostname> 9000
local
> but other coordinates (such as 1010 1010) also have the same issue.....
> 
> with the result:
> 
> [HGrid]: linking to <workhostname>:9000
> ....
> [HGrid]: successfully linked to region_uuid .....
> [HGrid]: failed getting/storing map image, because it is probably in the 
> cache
> [HGrid]: Unable to link, region has incompatible coordinates <1000,1000>
> 
> 
> Has anyone received the "incompatible coordinates" error? One thing I 
> noticed was that
> in the wiki instructions, different port numbers are used than the ones 
> found in OpenSim.ini.example.
> In OpenSim.ini.example, we have:
> 
> grid_server_url uses 8003
> user_server_url uses 8002
> asset_server_url uses 8003
> inventory_server_url uses 8003
> messaging_server_url uses 8006
> 
> and in the wiki instructions the ports are 8001, 8002, 8003, 8004, and
8006.
> 
> 
> 
> -p
> 
_______________________________________________
Opensim-users mailing list
Opensim-users at lists.berlios.de
https://lists.berlios.de/mailman/listinfo/opensim-users








More information about the Opensim-users mailing list