[Opensim-users] Opensim-users Digest, Vol 108, Issue 1

Erik Gordon Bainbridge tamrider at frodo.tv
Tue Jul 16 16:36:14 UTC 2024


I've found the problem.  It was  the latest Firestorm release.  I had recently upgraded to the current 7-1-9-7474 version.  This morning, I tried Singularity.  It worked  I had no problem accessing my grid.  I then uninstalled Firestorm and did a clean install of the latest version.  No change.  I still could not access my grid.  
 
I uninstalled Firestorm again and installed the previous version, 6-6-17-70368.  It works.  II can now log into my grid.  There definitely appears to be a problem with the latest Firestorm release for accessing a grid within its home network.  When I have time, I'll try it on a different computer to confirm it.
 
Thanks Cuga.  Your suggestions indirectly led to finding the problem by leading me to approach it from a new direction.
 
Apollo

Erik Gordon Bainbridgewww.VirtualMarin.com


> Send Opensim-users mailing list submissions to
>         opensim-users at opensimulator.org

> To subscribe or unsubscribe via the World Wide Web, visit
>         http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
> or, via email, send a message with subject or body 'help' to
>         opensim-users-request at opensimulator.org

> You can reach the person managing the list at
>         opensim-users-owner at opensimulator.org

> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Opensim-users digest..."


> Today's Topics:

>    1. Nat Loopback symptom but maybe something else???
>       (Erik Gordon Bainbridge)
>    2. Re: Nat Loopback symptom but maybe something else??? (Cuga Rajal)


> ----------------------------------------------------------------------

> Message: 1
> Date: Mon, 15 Jul 2024 16:41:29 -0700
> From: Erik Gordon Bainbridge <tamrider at frodo.tv>
> To: opensim-users at opensimulator.org
> Subject: [Opensim-users] Nat Loopback symptom but maybe something
>         else???
> Message-ID: <1310433027.20240715164129 at frodo.tv>
> Content-Type: text/plain; charset=utf-8

> I think the cause of my problem is pretty simple and maybe obvious, but I'm just not seeing it.?

> I've been running a grid with 4 simulators and 13 regions since 2011 (grid.virtualmarin.com:8002).? I've made no configuration changes in 5 or 10 years, but suddenly I can no longer login from within my home network, though users from outside my network can log in.? It sounds like a NAT loopback problem, but my router configuration looks good and wondering whether it might be something in my OpenSim.? However I haven't changed either my router or OpenSim configuration.?

> The server is a dedicated computer I built in 2011.? The operating system is OpenSUSE Leap 15.3.? It has two ssd's; one contains boot,? system and Home, the other has my grid. ? The problem started immediately after I replaced the grid ssd.? After the problem started, I put the original grid ssd back in the computer and restored a backup to it, but the problem continues.? I was not having a problem before replacing the ssd.? I haven't changed anything else.

> Here's what happens when I try logging in with Firestorm from within my network:
> - The Firestorm progress bar stops at about 70%
> - Robust shows my avatar making a login request.
> - The relevant simulator shows my avatar logging in, but then one minute after the last "Creating agent" entry, it shows my avatar disconnecting.? Firestorm hangs and never responds further

> I created several OpenSim grids a decade or so ago and used to have a reasonably decent understanding of OpenSim, but my grid has been so trouble free that it's allowed me to shift my attention to other things and ignore it's internals.? When I look at the code now, I realize how much I've forgotten.? I'm hoping someone can make suggestions for possible debugging steps or fixes.

> I'll appreciate any suggestions.? Thanks!

> System:
> Opensim 0.9.0.1 with Diva Wifi
> 4 simulators and 13 regions
> OpenSUSE Leap 15.3
> Netgear Nighthawk Router(R7000)-AC1900?

> ------------------------------

> Message: 2
> Date: Mon, 15 Jul 2024 17:18:13 -0700
> From: Cuga Rajal <cuga at rajal.org>
> To: opensim-users at opensimulator.org
> Subject: Re: [Opensim-users] Nat Loopback symptom but maybe something
>         else???
> Message-ID: <55C8F8AF-BB16-4899-8BE4-E751A2E2A8BB at rajal.org>
> Content-Type: text/plain;       charset=utf-8

> Just brainstorming a few possibilities.

> I had this exact symptom some time ago, and it turned out to be a config file issue. In my case, careful examination of console messages during login revealed a mismatch of some sort between the sent and expected hostnames. I had to correct Regions.ini. I don't know if this is the same issue as yours. 

> Another thing to check is if the computer running the viewer has a DNS alias (such as in a hosts file) for the hostname of your grid mapping to an internal IP instead of the one in DNS. Force it to go out the router and back in again.

> Hope this helps

> Cuga


>> On Jul 15, 2024, at 4:41?PM, Erik Gordon Bainbridge <tamrider at frodo.tv> wrote:
>> I think the cause of my problem is pretty simple and maybe obvious, but I'm just not seeing it. 
>> I've been running a grid with 4 simulators and 13 regions since 2011 (grid.virtualmarin.com:8002).  I've made no configuration changes in 5 or 10 years, but suddenly I can no longer login from within my home network, though users from outside my network can log in.  It sounds like a NAT loopback problem, but my router configuration looks good and wondering whether it might be something in my OpenSim.  However I haven't changed either my router or OpenSim configuration. 
>> The server is a dedicated computer I built in 2011.  The operating system is OpenSUSE Leap 15.3.  It has two ssd's; one contains boot,  system and Home, the other has my grid.   The problem started immediately after I replaced the grid ssd.  After the problem started, I put the original grid ssd back in the computer and restored a backup to it, but the problem continues.  I was not having a problem before replacing the ssd.  I haven't changed anything else.
>> Here's what happens when I try logging in with Firestorm from within my network:
>> - The Firestorm progress bar stops at about 70%
>> - Robust shows my avatar making a login request.
>> - The relevant simulator shows my avatar logging in, but then one minute after the last "Creating agent" entry, it shows my avatar disconnecting.  Firestorm hangs and never responds further
>> I created several OpenSim grids a decade or so ago and used to have a reasonably decent understanding of OpenSim, but my grid has been so trouble free that it's allowed me to shift my attention to other things and ignore it's internals.  When I look at the code now, I realize how much I've forgotten.  I'm hoping someone can make suggestions for possible debugging steps or fixes.
>> I'll appreciate any suggestions.  Thanks!
>> System:
>> Opensim 0.9.0.1 with Diva Wifi
>> 4 simulators and 13 regions
>> OpenSUSE Leap 15.3
>> Netgear Nighthawk Router(R7000)-AC1900 
>> _______________________________________________
>> Opensim-users mailing list
>> Opensim-users at opensimulator.org
>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users



> ------------------------------

> _______________________________________________
> Opensim-users mailing list
> Opensim-users at opensimulator.org
> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users


> End of Opensim-users Digest, Vol 108, Issue 1
> *********************************************


More information about the Opensim-users mailing list