[Opensim-users] Opensim-users Digest, Vol 19, Issue 7

Thu Oct 22 10:33:20 UTC 2015

Hello ssm2017, if you mean how to set a standalone HG enable using diva,
this might be something for you. Because I had it so hard to find actual
tutorials, I made a Google Plus community and wrote a Doc on "How to" set a
standalone. The doc is open to everyone, no need to be member of the
community. But the intention of that group it's to exchange and help each
other in setting a standalone. Here the link to the community: But I must
mention that the members have been silent lol but maybe some experts will
join some time and people will bring in more their questions and problems
into the group.

https://plus.google.com/u/0/communities/113101583047680567619

And below the direct link to the Folder with the Doc explaining how I set
my standaloneto

https://drive.google.com/folderview?id=0B8vDsK0PBSl2fk9LTDVrMDY4eWlDVHBDR0dlSUV6NDF3YW5sbW9YYVRiNUV0a3Vtb2htX2s&usp=sharing&tid=0B8vDsK0PBSl2bXpJWWQ2d1pRZ2M

On Thu, Oct 22, 2015 at 11:23 AM, ssm2017 <ssm2017 at gmail.com> wrote:

> Hello
> Im not a windows user but these informations look precious.
> Is it possible for someone to add this procedure on the opensimulator wiki
> ?
> Le 22 oct. 2015 05:00, "David P. Giffen" <revcoyote at gmail.com> a écrit :
>
>> Don’t change the Ethernet one, keep it set with the static IP or router
>> won’t know where to go for outside connection to the server. So an outside
>> connection would go cloud -> Your router -> server machine (Ethernet card)
>> -> server.
>>
>>
>>
>>
>>
>> *From:* opensim-users-bounces at opensimulator.org [mailto:
>> opensim-users-bounces at opensimulator.org] *On Behalf Of *Isis Ophelia
>> *Sent:* Wednesday, October 21, 2015 7:09 PM
>> *To:* opensim-users at opensimulator.org
>> *Subject:* Re: [Opensim-users] Opensim-users Digest, Vol 19, Issue 7
>>
>>
>>
>> Thanks so much Fred, your explanation was exactly what I needed to
>> configure the Windows Loopback Adapter. I will remove the line in the Hosts
>> file and configure the Adapter and see if that helps me.
>>
>> A question. Do I need to do anything to the Etherneth connection? I mean
>> right now I had configured it so that this PC got a static internal IP
>> 192.168.2.10. Do I leave it alone and do nothing to it and just configure
>> the windows loopback adapter?
>>
>>
>>
>> On Wed, Oct 21, 2015 at 10:42 PM, Fred Beckhusen <fred at mitsi.com> wrote:
>>
>> I would not use the Hosts file 'trick' on a server that also has the
>> viewer.  The fact that you need to edit hosts file indicates that the
>> router cannot loopback.    I use the Microsoft Loopback Adapter.
>>
>> What happens is that the server broadcasts your public DNS name to
>> clients not as a name, but as an address.    The server first does a DNS
>> lookup and via hosts, finds the 127.0.0.1 loopback.   It will broadcast
>> this 127.0.0.1 address  to a remote WAN client, and they cannot connect.
>> Yet it works for you.    But without loopback, you cannot connect.
>>
>> On Windows, you can add a software loopback adapter for the Public Port
>> to loopback the public IP to the server, which allows the server to send
>> the public IP to clients.
>>
>> Installation instructions:
>> https://technet.microsoft.com/en-us/library/cc708322(v=ws.10).aspx
>>
>> Once it is installed you have  to set it up.  It will be in the Control
>> Panel->Network Connections, as "NAT Loopback".  Its just like an Ethernet
>> driver.   Open it, and find Internet Protocol Version 4 (TCP/IPv4) and
>> change its properties.  I click "Use the following IP address" and enter my
>> PUBLIC IP in the IP Address box.   No Gateway is needed.  Under DNS, I used
>> my routers IP address so it can do the DNS lookups.    Or you can use
>> Googles super DNS of 8.8.8.8. and 8.8.4.4
>>
>> Once enabled, this will make any reference to the Public IP address route
>> right back to the system itself,  just as the router should do.    And WAN
>> users get the correct Public IP sent to them, instead of 127.0.0.1
>>
>>
>> Ferd Frederix
>> http://www.outworldz.com
>>
>>
>> On 2015-10-21 11:31 AM, opensim-users-request at opensimulator.org wrote:
>>
>> Today's Topics:
>>
>>     1. Re: HG - Not able to teleport back home (Isis Ophelia)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Wed, 21 Oct 2015 17:54:13 +0200
>> From: Isis Ophelia <isisophelia at gmail.com>
>> To: opensim-users at opensimulator.org
>> Subject: Re: [Opensim-users] HG - Not able to teleport back home
>> Message-ID:
>>         <CAN5TJuReDxagLKBbrCzyByfL=9_Xw7=
>> RWh8O-oUkWJQ_Y4HNng at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Thank you Garmin. I have configured my internet connection to be a static
>> internal IP which is 192.168.2.10. Following your suggestion I replaced
>> the
>> 0.0.0.0 with that IP.
>> Result is: The console shows:
>> 17:48:30 - [SCENE]: Region Arcana Welcome authenticated and authorized
>> incoming
>> root agent Isis Ophelia 1b77be9b-248e-400b-a4ca-499d0aa06d77 (circuit code
>> 40308
>> 2697)
>>
>> And the viewer tells me: We are having problems connecting. There might be
>> a problem with your internet connection or the Arcana World Grid.
>> So pity this does not help :(
>> Thank so much though :)
>>
>> On Wed, Oct 21, 2015 at 4:24 PM, GarminKawaguichi <
>> garmin.kawaguichi at magalaxie.com> wrote:
>>
>>
>> _______________________________________________
>> Opensim-users mailing list
>> Opensim-users at opensimulator.org
>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
>>
>>
>>
>> _______________________________________________
>> Opensim-users mailing list
>> Opensim-users at opensimulator.org
>> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
>>
>>
> _______________________________________________
> Opensim-users mailing list
> Opensim-users at opensimulator.org
> http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://opensimulator.org/pipermail/opensim-users/attachments/20151022/c84ee422/attachment-0001.html>