[Opensim-users] Opensim and BT home hub 3

[InuYasha Meiji]

Hello, I am by no means an expert.  You mentioned ports 8002-8004 are 
open, but you never mentioned checking for the ports of you regions.  At 
least that is what I know of running my grid and how it works.  I 
started as a stand alone 3 years ago, and only within the last year 
changed to using robust.  I wish I had fiber. It will be bad here if 
Cable don't get moving and at least upgrade the equipment so I can get 
faster uploads then only 5..  Lucky you get 20.

InuYasha


On 5/22/2013 2:51 PM, Rob.J wrote:
> Hello everyone. I do hope somebody can shed light on a problem I am having.
>
> I successfully set up a hypergrid enabled sim last year, using SKY broadband
> and it's supplied router.
> The Grid and sims ran very well, and I set up 7 regions. The router
> correctly NAT Looped back to allow me to log in myself, and my friends could
> log in from around the world and help me build. Group module and voice were
> not installed.
>
> Noticing lag was starting to build as the sims filled with objects, I
> decided to switch ISP to BT and the fibre optic Infinity option 2, which
> gives me an 80mb DL / 20mb UL.
>
> BT Supplied a home hub 3 router version A and when I first set it up, all
> port forwarding was dead in the water.
>
> However, after 7 days a firmware update arrived and some partial success has
> followed. It now reports firmware as Software version 4.7.5.1.83.8.94.1.11
> (Type A).
>
> I followed the advice on one of BT's help forums for setting up port
> forwarding, using the suggested static ethernet based LAN ip of 192.168.1.50
>
> Now, bear in mind opensim worked perfectly well before switchover to new
> ISP, and no changes have been made to it's files.
>
> The dynamic ip is handled by No-Ip and again worked very well with the old
> ISP.
>
> When I boot up opensim via terminal on my iMac, I use 2 windows. First comes
> the ROBUST, which loads flawlessly. A port checker reveals at end of boot
> up, ports 8002 to 8004 are now open.
>
> Now it gets muddy.
>
> Using the second terminal window to 'mono Opensim.exe' starts the region
> boot up well, but then it slows down and stalls at one point. After about a
> minute the following lines appear;
>
> 19:06:39 - [FORMS]: exception occured POST
> http://dreamgrid.no-ip.org:8003/accounts: The request timed out  at
> System.Net.HttpWebRequest.GetRequestStream () [0x00000] in <filename
> unknown>:0
>    at OpenSim.Framework.SynchronousRestFormsRequester.MakeRequest
> (System.String verb, System.String requestUrl, System.String obj) [0x00000]
> in <filename unknown>:0
> 19:06:39 - [FORMS]: InvalidOperationException on receiving POST
> http://dreamgrid.no-ip.org:8003/accounts
> 19:06:39 - [FORMS]: Slow request to <15> POST
> http://dreamgrid.no-ip.org:8003/accounts took 100003ms, 100003ms writing,
> VERSIONMIN=0&VERSIONMAX=0&METHOD=getaccount&ScopeID=00000000-0000-0000-0000-000000000000&UserID=5af7
> 19:06:39 - [ACCOUNT CONNECTOR]: GetUserAccount received null or empty reply
>
> The boot up then continues, slowing now and then to report messages such as
>
> 19:08:34 - [SynchronousRestObjectRequester]: Slow request to <27> POST
> http://dreamgrid.no-ip.org:8003/assets/ took 35157ms, 35017ms writing,
> <?xml version="1.0" encoding="utf-8"?><AssetBase
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instan
>
> You can see from the time stamps the amount of time lapsed and it hasnt got
> to the end yet. Before on my old system the entire thing booted to the end
> in less than a minute.
>
> A couple of red lines appear, stating
> 19:13:34 - [WATCHDOG]: Timeout detected for thread "Heartbeat (LMF)".
> ThreadState=WaitSleepJoin. Last tick was 39155ms ago.
> 19:13:39 - [WATCHDOG]: Timeout detected for thread "Heartbeat (Liston)".
> ThreadState=WaitSleepJoin. Last tick was 5906ms ago.
>
> The names in brackets are of course the region names.
>
> 2 final bits of info that may help solve this. The port checker reveals port
> 9000 is open, which is the base region, but all ports above are reporting as
> closed.
> Secondly, when I log in, I am just an orange cloud and cannot move at all.
>
> Any thoughts are feedback would be very much appreciated.
>
>
>
>
> --
> View this message in context: http://opensim-users.2152040.n2.nabble.com/Opensim-and-BT-home-hub-3-tp7580040.html
> Sent from the opensim-users mailing list archive at Nabble.com.
> _______________________________________________
> Opensim-users mailing list
> Opensim-users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/opensim-users


-- 
________________________________________________________________________
Opensim User: In Gridmode  on Version 0.7.4. Nine Instances with 56 Regions. on Windows 7, 64-bit. Phenom 9500 2.2 GHz Quad Core, Terabyte Hard Drive, 8gig DDR2 RAM.  Used XAMPP to load PHP Version 5.3.0, Apache
and MySQL 5.1.41-community edition.  Groups, Profiles, Vivox Voice and
Offline Messages all working. (Not yet Public, 10 user accounts so far).
________________________________________________________________________