[Opensim-users] External Access to standalone

Gary Beck gab4gab at gmail.com
Wed Apr 17 18:15:00 UTC 2013


Tom,
    To understand your issue it would help to know, at least generically, what you have specified in your region parameters.  Sometimes this problem occurs when region parameters produce network addresses that are usable for locally connected viewers and not usable by remote viewers. 
- Gary Beck
  ----- Original Message ----- 
  From: Tom Bess 
  To: opensim-users at lists.berlios.de 
  Sent: Wednesday, April 17, 2013 11:27 AM
  Subject: Re: [Opensim-users] External Access to standalone


  Hi Fleep, thank you for your advice. There does seem to be an issue with my router. I cannot get a static IP address from my ISP hence I used the dynamic IP. I will let you know how I get on. Thanks. Tom

  Tom Willans  BSc(Hons)  MBCS  CITP
  PhD Student
  Serious Games Institute, Coventry University
  United Kingdom

  Managing Director Bessacarr Publications Ltd
  Senior Research Representative:Engineering and Computing
  +44 (0)121 288 0281
  email: tom.willans at bessacarr.com
  skype: tom.willans
  Second Life and OSGrid: Tom Tiros


  Sent from my mobile



  On 17 Apr 2013, at 12:59, Fleep Tuque <fleep513 at gmail.com> wrote:


    Hi Tom,


    This is a fairly common question that can have a number of different root causes.  


    It might be helpful to go over the details of exactly what happens when you try to log in.  Based on my understanding and previous posts from Justin, Diva and others, this is my understanding of how it works:  When you start up the client and enter your name/password, it sends those details to the OpenSim login service. If your password is correct, it tells the region simulator that you're coming.  The login service then sends back to your client the IP address and port to use to enter that region based on the information in the regions.ini configuration file.  Your client then connects to the region using those details.  


    If you are stuck at "Connecting to Region.." or "Waiting for region handshake..." then your client successfully connected to the Opensim login service, but the information it is using to try to connect to the region (IP address and port number) is not allowing the connection.  This can be any number of issues related to your networking setup.  


    1)  Check to make sure you have the correct ports open on your router and firewall by reviewing the Opensim Network Settings page and Firewall settings page.  You can verify this by using 3rd party port checker software, I've used this successfully:  http://portforward.com/help/portcheck.htm


    2)  If you are on a home network, make sure your router supports NAT Loopback, per the instructions on the Opensim wiki:  http://opensimulator.org/wiki/NAT_Loopback_Routers


    3)  If you do not have a router that supports NAT Loopback, or are on a corporate or campus network with 1-to-1 NATing, you will need to have an external static IP address assigned to your server for users outside your network to connect.  See this thread for more information:  http://opensim-users.2152040.n2.nabble.com/NAT-amp-Corporate-Firewall-td6223654.html


    I run FleepGrid from home and since my router didn't support NAT Loopback, I got a static IP address from my ISP and that resolved all my issues with people not being able to connect from outside my home network.


    Hope this info is helpful.  Good luck and let us know how it goes!


    - Chris/Fleep




    Chris M. Collins (SL/OS: Fleep Tuque)
    Center for Simulations & Virtual Environments Research (UCSIM)
    UCIT Instructional & Research Computing
    University of Cincinnati
    406A Zimmer Hall
    315 College Drive
    PO BOX 210088
    Cincinnati, OH 45221-0088
    chris.collins at uc.edu
    (513) 556-3018


    http://ucsim.uc.edu






    On Wed, Apr 17, 2013 at 12:44 AM, Tom <tom.willans at bessacarr.com> wrote:

      I am trying to gain external access to my OS standalone server "Diva".  On the internal network all is fine even using my external url (via dynamic dns). The  External login gets as far as [SCENE]: Region Central authenticated and authorized incoming root agent XXXXX (circuit code 230241706) (using the rest console).  Firestorm then fails giving the message "Waiting for region handshake" after a number of attempts. 


      The IP address is redirected using dynamic dns, the host machine has a reserved IP address.  Port forwarding for both TCP and UDP are set to 9000..9004 to this machine is set up. I have the same problem with an without the firewall on (but forwarding set).


      I am able to access the diva Wifi, webpage and use the rest console for this machine. ssh works fine.


      Any ideas?


      Thanks 


      p.s. apologies for having sent request on another posting



      _______________________________________________
      Opensim-users mailing list
      Opensim-users at lists.berlios.de
      https://lists.berlios.de/mailman/listinfo/opensim-users



    _______________________________________________
    Opensim-users mailing list
    Opensim-users at lists.berlios.de
    https://lists.berlios.de/mailman/listinfo/opensim-users


------------------------------------------------------------------------------


  _______________________________________________
  Opensim-users mailing list
  Opensim-users at lists.berlios.de
  https://lists.berlios.de/mailman/listinfo/opensim-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://opensimulator.org/pipermail/opensim-users/attachments/20130417/847a76e3/attachment.html>


More information about the Opensim-users mailing list