[Opensim-users] Awaiting region handshake

[Gary Banham]

From: opensim-users-bounces at lists.berlios.de
[mailto:opensim-users-bounces at lists.berlios.de] On Behalf Of Guardian
Sent: Tuesday, August 23, 2011 4:00 PM
To: opensim-users at lists.berlios.de
Subject: Re: [Opensim-users] Awaiting region handshake

 

Thanks Gary, I'll await your config.

On Aug 23, 2011 11:54 PM, "Gary Banham" <banham1 at telus.net> wrote:
> ok I just had my desktop crash so it lost the email I was writing
> 
> I have to get to work when I get home I will send you a copy of my grid
> common ini file and the robust to use as example
> 
> stick with the wan address for now and ill help you configure what you
want
> with Opensim
> 
> then you can figure out dydns when you know Opensim is working properly
> 
> 
> 
> TC
> 
> Gary
> 
> 
> 
> From: opensim-users-bounces at lists.berlios.de
> [mailto:opensim-users-bounces at lists.berlios.de] On Behalf Of Guardian
> Sent: Monday, August 22, 2011 9:26 PM
> To: opensim-users at lists.berlios.de
> Subject: Re: [Opensim-users] Awaiting region handshake
> 
> 
> 
> OK, I did a fresh install, just simple stand alone works fine.
> 
> I used my WAN address for the region externalip.
> 
> If I change the externalip to my dyndns address it no longer works.
> 
> On Aug 23, 2011 2:55 PM, "Guardian" <linux.deamon at gmail.com> wrote:
>> I'll delete my old install and start from scratch, then get back to you.
> So
>> basically you want me to start with a stand alone install?
>> On Aug 23, 2011 2:29 PM, "Gary Banham" <banham1 at telus.net> wrote:
>>> Ok lets start with scratch go
>>>
>>> download the opensim version 7.1.1 not diva just the straight version
>>>
>>> run the 32bit opensim start and follow the instructons
>>>
>>> you should be able to connect to opensim as localhost:9000
>>>
>>> in your consol
>>>
>>> follow the set up instructions as to region and estate ect
>>>
>>> make sure that worked
>>>
>>> after that I'll help you set it up as you like
>>>
>>>
>>>
>>>
>>>
>>> TC
>>>
>>> Gary
>>>
>>>
>>>
>>>
>>>
>>> From: opensim-users-bounces at lists.berlios.de
>>> [mailto:opensim-users-bounces at lists.berlios.de] On Behalf Of Guardian
>>> Sent: Monday, August 22, 2011 8:08 PM
>>> To: opensim-users at lists.berlios.de
>>> Subject: Re: [Opensim-users] Awaiting region handshake
>>>
>>>
>>>
>>> Any Ideas guys?
>>>
>>> On Mon, Aug 22, 2011 at 1:11 PM, Guardian <linux.deamon at gmail.com>
wrote:
>>>
>>> ok, so I've put the server in my router's DMZ, and I can HTTP to all the
>>> ports I need (8002 and 9000) and get the hippo page.
>>>
>>>
>>>
>>> I've put the modem's external IP address in regions under external ip,
> and
>>> the internal ip in the grid-common.ini
>>>
>>>
>>>
>>> now I get thos error in the robust console when trying to connect:
>>>
>>>
>>>
>>> 13:08:08 - [WEB UTIL]: <0> osd request for
>>> http://222.155.61.228:9000/agent/142d8e3f-c5ce-4e88-8a5f-8866da75223f/,
>>> method POST FAILED: Error: ConnectFailure (Connection refused)
>>>
>>>
>>>
>>>
>>>
>>> On Mon, Aug 22, 2011 at 12:24 PM, Gary Banham <banham1 at telus.net> wrote:
>>>
>>> you know what thats my thinking you and maby us are overcomplicating the
>>> whole thing
>>>
>>>
>>>
>>>
>>>
>>> From: opensim-users-bounces at lists.berlios.de
>>> [mailto:opensim-users-bounces at lists.berlios.de] On Behalf Of Gary Beck
>>> Sent: Sunday, August 21, 2011 6:14 PM
>>>
>>>
>>> To: opensim-users at lists.berlios.de
>>>
>>> Subject: Re: [Opensim-users] Awaiting region handshake
>>>
>>>
>>>
>>> If you don't require LAN access then NAT Loopback isn't needed.
>>>
>>> ----- Original Message -----
>>>
>>> From: Guardian <mailto:linux.deamon at gmail.com>
>>>
>>> To: opensim-users at lists.berlios.de
>>>
>>> Sent: Sunday, August 21, 2011 7:43 PM
>>>
>>> Subject: Re: [Opensim-users] Awaiting region handshake
>>>
>>>
>>>
>>> Hi again all,
>>>
>>>
>>>
>>> I'm really struggling to find a router in NZ that supports NAT
> Loopback...
>> I
>>> spent over an hour with Linksys and they pretty much said none of their
>>> routers support it apart from the E2000 which can't be connected to any
> NZ
>>> ISP's...
>>>
>>>
>>>
>>> I was just looking at the opensim wiki again, and notice it now says:
>>>
>>>
>>>
>>> "This is an issue since each region has to be specify an IP address for
>> the
>>> client to connect. This is the ExternalHostName parameter in a regions
>>> config file (e.g. bin/Regions/Regions.ini). In the absence of NAT
>> loopback,
>>> if a forward facing IP address is specified (such as 199.149.252.44)
then
>>> external clients will be able to connect to the region but clients on
> your
>>> local network will not. If the internal address were put in
>> ExternalHostName
>>> instead (e.g. 192.168.2.40) then viewers on the local network will be
> able
>>> to connect but viewers from an external network would not."
>>>
>>>
>>>
>>> My Issue was I couldnt connect to the sim from outside even when the
>>> external IP address was specified in regions.
>>>
>>>
>>>
>>> I don't need to connect to the sim from the LAN, only the WAN so is NAT
>>> loopback still an issue?
>>>
>>>
>>>
>>> _______________________________________________
>>> Opensim-users mailing list
>>> Opensim-users at lists.berlios.de
>>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>>
>>>
>>>
>>>
>>>
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://opensimulator.org/pipermail/opensim-users/attachments/20110823/808164fb/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Robust.ini
Type: application/octet-stream
Size: 9290 bytes
Desc: not available
URL: <http://opensimulator.org/pipermail/opensim-users/attachments/20110823/808164fb/attachment.obj>