[Opensim-users] Awaiting region handshake

[Guardian]

OK, I did a fresh install, just simple stand alone works fine.

I used my WAN address for the region externalip.

If I change the externalip to my dyndns address it no longer works.
 On Aug 23, 2011 2:55 PM, "Guardian" <linux.deamon at gmail.com> wrote:
> I'll delete my old install and start from scratch, then get back to you.
So
> basically you want me to start with a stand alone install?
> On Aug 23, 2011 2:29 PM, "Gary Banham" <banham1 at telus.net> wrote:
>> Ok lets start with scratch go
>>
>> download the opensim version 7.1.1 not diva just the straight version
>>
>> run the 32bit opensim start and follow the instructons
>>
>> you should be able to connect to opensim as localhost:9000
>>
>> in your consol
>>
>> follow the set up instructions as to region and estate ect
>>
>> make sure that worked
>>
>> after that I'll help you set it up as you like
>>
>>
>>
>>
>>
>> TC
>>
>> Gary
>>
>>
>>
>>
>>
>> From: opensim-users-bounces at lists.berlios.de
>> [mailto:opensim-users-bounces at lists.berlios.de] On Behalf Of Guardian
>> Sent: Monday, August 22, 2011 8:08 PM
>> To: opensim-users at lists.berlios.de
>> Subject: Re: [Opensim-users] Awaiting region handshake
>>
>>
>>
>> Any Ideas guys?
>>
>> On Mon, Aug 22, 2011 at 1:11 PM, Guardian <linux.deamon at gmail.com> wrote:
>>
>> ok, so I've put the server in my router's DMZ, and I can HTTP to all the
>> ports I need (8002 and 9000) and get the hippo page.
>>
>>
>>
>> I've put the modem's external IP address in regions under external ip,
and
>> the internal ip in the grid-common.ini
>>
>>
>>
>> now I get thos error in the robust console when trying to connect:
>>
>>
>>
>> 13:08:08 - [WEB UTIL]: <0> osd request for
>> http://222.155.61.228:9000/agent/142d8e3f-c5ce-4e88-8a5f-8866da75223f/,
>> method POST FAILED: Error: ConnectFailure (Connection refused)
>>
>>
>>
>>
>>
>> On Mon, Aug 22, 2011 at 12:24 PM, Gary Banham <banham1 at telus.net> wrote:
>>
>> you know what thats my thinking you and maby us are overcomplicating the
>> whole thing
>>
>>
>>
>>
>>
>> From: opensim-users-bounces at lists.berlios.de
>> [mailto:opensim-users-bounces at lists.berlios.de] On Behalf Of Gary Beck
>> Sent: Sunday, August 21, 2011 6:14 PM
>>
>>
>> To: opensim-users at lists.berlios.de
>>
>> Subject: Re: [Opensim-users] Awaiting region handshake
>>
>>
>>
>> If you don't require LAN access then NAT Loopback isn't needed.
>>
>> ----- Original Message -----
>>
>> From: Guardian <mailto:linux.deamon at gmail.com>
>>
>> To: opensim-users at lists.berlios.de
>>
>> Sent: Sunday, August 21, 2011 7:43 PM
>>
>> Subject: Re: [Opensim-users] Awaiting region handshake
>>
>>
>>
>> Hi again all,
>>
>>
>>
>> I'm really struggling to find a router in NZ that supports NAT
Loopback...
> I
>> spent over an hour with Linksys and they pretty much said none of their
>> routers support it apart from the E2000 which can't be connected to any
NZ
>> ISP's...
>>
>>
>>
>> I was just looking at the opensim wiki again, and notice it now says:
>>
>>
>>
>> "This is an issue since each region has to be specify an IP address for
> the
>> client to connect. This is the ExternalHostName parameter in a regions
>> config file (e.g. bin/Regions/Regions.ini). In the absence of NAT
> loopback,
>> if a forward facing IP address is specified (such as 199.149.252.44) then
>> external clients will be able to connect to the region but clients on
your
>> local network will not. If the internal address were put in
> ExternalHostName
>> instead (e.g. 192.168.2.40) then viewers on the local network will be
able
>> to connect but viewers from an external network would not."
>>
>>
>>
>> My Issue was I couldnt connect to the sim from outside even when the
>> external IP address was specified in regions.
>>
>>
>>
>> I don't need to connect to the sim from the LAN, only the WAN so is NAT
>> loopback still an issue?
>>
>>
>>
>> _______________________________________________
>> Opensim-users mailing list
>> Opensim-users at lists.berlios.de
>> https://lists.berlios.de/mailman/listinfo/opensim-users
>>
>>
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://opensimulator.org/pipermail/opensim-users/attachments/20110823/ea64828f/attachment.html>