[Opensim-users] Awaiting region handshake

[Gary Banham]

Ok lets start with scratch go 

download the opensim version  7.1.1 not diva just the straight version

run the 32bit opensim start and follow the instructons

you should be able to connect to opensim as localhost:9000

in your consol

follow the set up instructions as to region and estate ect

make sure that worked

after that I'll help you set it up as you like

 

 

TC

Gary

 

 

From: opensim-users-bounces at lists.berlios.de
[mailto:opensim-users-bounces at lists.berlios.de] On Behalf Of Guardian
Sent: Monday, August 22, 2011 8:08 PM
To: opensim-users at lists.berlios.de
Subject: Re: [Opensim-users] Awaiting region handshake

 

Any Ideas guys?

On Mon, Aug 22, 2011 at 1:11 PM, Guardian <linux.deamon at gmail.com> wrote:

ok, so I've put the server in my router's DMZ, and I can HTTP to all the
ports I need (8002 and 9000) and get the hippo page.

 

I've put the modem's external IP address in regions under external ip, and
the internal ip in the grid-common.ini

 

now I get thos error in the robust console when trying to connect:

 

13:08:08 - [WEB UTIL]: <0> osd request for
http://222.155.61.228:9000/agent/142d8e3f-c5ce-4e88-8a5f-8866da75223f/,
method POST FAILED: Error: ConnectFailure (Connection refused)



 

On Mon, Aug 22, 2011 at 12:24 PM, Gary Banham <banham1 at telus.net> wrote:

you know what thats my thinking you and maby us are overcomplicating the
whole thing

 

 

From: opensim-users-bounces at lists.berlios.de
[mailto:opensim-users-bounces at lists.berlios.de] On Behalf Of Gary Beck
Sent: Sunday, August 21, 2011 6:14 PM


To: opensim-users at lists.berlios.de

Subject: Re: [Opensim-users] Awaiting region handshake

 

If you don't require LAN access then NAT Loopback isn't needed.

----- Original Message ----- 

From: Guardian <mailto:linux.deamon at gmail.com>  

To: opensim-users at lists.berlios.de 

Sent: Sunday, August 21, 2011 7:43 PM

Subject: Re: [Opensim-users] Awaiting region handshake

 

Hi again all,

 

I'm really struggling to find a router in NZ that supports NAT Loopback... I
spent over an hour with Linksys and they pretty much said none of their
routers support it apart from the E2000 which can't be connected to any NZ
ISP's...

 

I was just looking at the opensim wiki again, and notice it now says:

 

"This is an issue since each region has to be specify an IP address for the
client to connect. This is the ExternalHostName parameter in a regions
config file (e.g. bin/Regions/Regions.ini). In the absence of NAT loopback,
if a forward facing IP address is specified (such as 199.149.252.44) then
external clients will be able to connect to the region but clients on your
local network will not. If the internal address were put in ExternalHostName
instead (e.g. 192.168.2.40) then viewers on the local network will be able
to connect but viewers from an external network would not."

 

My Issue was I couldnt connect to the sim from outside even when the
external IP address was specified in regions.

 

I don't need to connect to the sim from the LAN, only the WAN so is NAT
loopback still an issue?

 

_______________________________________________
Opensim-users mailing list
Opensim-users at lists.berlios.de
https://lists.berlios.de/mailman/listinfo/opensim-users

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://opensimulator.org/pipermail/opensim-users/attachments/20110822/8bd921fb/attachment.html>