[Opensim-users] Freeswitch Experiments

[Christopher Holden]

Hi,

I've been trying to get freeswitch working for months and have built it 
successfully many times on both Windows & Linux platforms.

Currently using Ubuntu. I *am* enabling the correct modules before 
building and running etc. I am using my EXTERNAL address in all config 
files where server addresses are required. I have opened up all the 
freeswitch ports on my router to point at my freeswitch server.

Without fail when I log into my sim I get an error in the freeswitch 
console:

freeswitch at sim-server> 2010-07-28 09:17:46.476983 [WARNING] 
sofia_reg.c:1890 Can't find user [x5o2NhrW9QPKmz4QHmNJBNw==@192.168.1.111]
You must define a domain called '192.168.1.111' in your directory and 
add a user with the id="x5o2NhrW9QPKmz4QHmNJBNw==" attribute
and you must configure your device to use the proper domain in it's 
authentication credentials. (etc etc etc...)

Is this really down to an error in my basic configuration (server ip 
addresses for example) or do I have to 'add a user' as it states and if 
so how?!

Googling opensim/freeswitch problems shows this is the most common error 
encountered by folks trying to get it working but I have yet to read of 
or have anyone explain to me how to fix it!

I'd be so grateful if anyone could give me some pointers,

Thanks,

Chris.

Ai Austin wrote:
> We have been experimenting with the use of Freeswitch for voice 
> support on a Grid with Opensim.exe regions running on the same host as 
> Robust.exe and on several hosts, and on a simple standalone setup.
>
> The Freeswitch server has been run on the same or different hosts to 
> the machine  on which the Opensim region that acts as the link to 
> Freeswitch is hosted.  All these combinations work fine if the correct 
> settings are made to the Freeswitch server I{P address and the 
> (confusingly named) freeswitch_service_server in Opensim.ini which is 
> the machine running Opensim.exe and hosting the single region used by 
> the Freeswitch setup to link between Freeswitch and Opensim.  You can 
> then use this setup to serve ALL regions on one or multiple 
> Opensim.exe setups across several machines in a grid environment if 
> you wish, and if the relevant OpenSim.ini section is set appropriately 
> in each.
>
> Given this experience, we have reworded the examples in the Wiki to 
> make them more generic and clear difference between the hosts 
> involved, as the previous example used a local network example (using 
> a server on 198.168.0.1) that would not work beyond a typical firewall.
>
> http://opensimulator.org/wiki/Freeswitch_Module
>
>
> It would be helpful I think if a dev who has access to 
> OpenSim.ini.example could change one commented lines in the 
> [FreeSwitchVoice] section of that which can cause a bit of confusion...
>
>
> ; freeswitch_port = 9000
>
>     (rather than the rather confusing example given of port of 80 
> which makes it sound less like an Opensim.exe supported region port)
>
>
> _______________________________________________
> Opensim-users mailing list
> Opensim-users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/opensim-users
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 9.0.851 / Virus Database: 271.1.1/3030 - Release Date: 07/26/10 19:34:00
>
>