[Opensim-users] Problem with Port not being found
Jane Foxclaw
janefoxclaw at gmail.com
Thu Jan 14 17:53:14 UTC 2010
Ok, I am submitting this to see what you all think, because I am trying to
run it in Grid Mode, with HyperGrid so that I can log other regions into it.
Its on Linux and all ports are open. We have tested stand alone and it works
fine. but now we are trying to solve this when we started over from scratch
on how to get the UserServer to be seen by the MessagingServer.
THE ERROR
----------------------------------------------
20:18:12 - [SERVER]: Unable to connect to server
http://173.212.195.224:8002/ for registration. User service not running?
Exception Error: ConnectFailure at
System.Net.HttpWebRequest.EndGetRequestStream (IAsyncResult asyncResult)
[0x00000]
at System.Net.HttpWebRequest.GetRequestStream () [0x00000]
at Nwc.XmlRpc.XmlRpcRequest.Send (System.String url, Int32 timeout)
[0x00000]
at Nwc.XmlRpc.XmlRpcRequest.Invoke (System.String url) [0x00000]
at
OpenSim.Grid.MessagingServer.Modules.InterMessageUserServerModule.registerWithUserServer
() [0x00000]
----------------------------------------------
OpenSim.ini file port settings
----------------------------------------------
[Network]
ConsoleUser = "Test"
ConsolePass = "secret"
http_listener_port = 9000
default_location_x = 1000
default_location_y = 1000
; ssl config: Experimental! The auto https config only really works
definately on windows XP now
; you need a Cert Request/Signed pair installed in the MY store with the
CN specified below
; you can use https on other platforms, but you'll need to configure the
httpapi yourself for now
http_listener_ssl = false ; Also create a SSL server
http_listener_cn = "localhost" ; Use the cert with the common name
http_listener_sslport = 9001 ; Use this port for SSL connections
http_listener_ssl_cert = "" ; Currently unused, but will be used for
OSHttpServer
; Hostname to use in llRequestURL/llRequestSecureURL
; if not defined - default machine name is being used
; (on Windows this mean NETBIOS name - useably only inside local
network)
; ExternalHostNameForLSL=127.0.0.1
; Uncomment below to enable llRemoteData/remote channels
; remoteDataPort = 20800
grid_server_url = "http://173.212.195.224:8003"
grid_send_key = "1234"
grid_recv_key = "1234"
user_server_url = "http://173.212.195.224:8002"
user_send_key = "1234"
user_recv_key = "1234"
asset_server_url = "http://173.212.195.224:8003"
inventory_server_url = "http://173.212.195.224:8003"
; The MessagingServer is a companion of the UserServer. It uses
; user_send_key and user_recv_key, too
messaging_server_url = "http://173.212.195.224:8006"
; What is reported as the "X-Secondlife-Shard"
; Defaults to the user server url if not set
; The old default is "OpenSim", set here fro compatibility
shard = "OpenSim"
------------------------------------------------------
OpenSim.Server.ini settings
------------------------------------------------------
; * The startup section lists all the connectors to start up in this server
; * instance. This may be only one, or it may be the entire server suite.
; * Multiple connectors should be seaprated by commas.
; *
; * These are the IN connectors the server uses, the in connectors
; * read this config file and load the needed OUT and database connectors
; *
; * Add "OpenSim.Server.Handlers.dll:AuthenticationServiceConnector" to
; * enable the experimental authentication service
; *
[Startup]
ServiceConnectors =
"OpenSim.Server.Handlers.dll:AssetServiceConnector,OpenSim.Server.Handlers.dll:InventoryServiceInConnector,OpenSim.Server.Handlers.dll:FreeswitchServerConnector,OpenSim.Server.Handlers.dll:GridServiceConnector"
; * This is common for all services, it's the network setup for the entire
; * server instance
; *
[Network]
port = 8003
; * The following are for the remote console
; * They have no effect for the local or basic console types
; * Leave commented to diable logins to the console
;ConsoleUser = Test
;ConsolePass = secret
; * As an example, the below configuration precisely mimicks the legacy
; * asset server. It is read by the asset IN connector (defined above)
; * and it then loads the OUT connector (a local database module). That,
; * in turn, reads the asset loader and database connection information
; *
[AssetService]
LocalServiceModule = "OpenSim.Services.AssetService.dll:AssetService"
DefaultAssetLoader = "OpenSim.Framework.AssetLoader.Filesystem.dll"
AssetLoaderArgs = "assets/AssetSets.xml"
StorageProvider = "OpenSim.Data.MySQL.dll"
ConnectionString ="Data Source=localhost;Database=opensim;User
ID=root;Password=I have put one here;";
; * This configuration loads the inventory server modules. It duplicates
; * the function of the legacy inventory server
; *
[InventoryService]
LocalServiceModule =
"OpenSim.Services.InventoryService.dll:InventoryService"
UserServerURI = "http://173.212.195.224:8002"
SessionAuthentication = "true"
StorageProvider = "OpenSim.Data.MySQL.dll"
ConnectionString ="Data Source=localhost;Database=opensim;User
ID=root;Password=I have put one here;";
; * This is the configuration for the freeswitch server in grid mode
[FreeswitchService]
LocalServiceModule =
"OpenSim.Services.FreeswitchService.dll:FreeswitchService"
; * This is the new style authentication service. Currently, only MySQL
; * is implemented. "Realm" is the table that is used for user lookup.
; * By setting it to "users", you can use the old style users table
; * as an authentication source.
; *
[AuthenticationService]
AuthenticationServiceModule =
"OpenSim.Services.AuthenticationService.dll:PasswordAuthenticationService"
StorageProvider = "OpenSim.Data.MySQL.dll"
ConnectionString ="Data Source=localhost;Database=opensim;User
ID=root;Password=I have put one here;";
; Realm = "users"
; * This is the new style user service.
; * "Realm" is the table that is used for user lookup.
; * It defaults to "users", which uses the legacy tables
; *
[UserAccountService]
AuthenticationServiceModule =
"OpenSim.Services.UserService.dll:UserAccountService"
StorageProvider = "OpenSim.Data.MySQL.dll"
ConnectionString ="Data Source=localhost;Database=opensim;User
ID=root;Password=I have put one here;";
; Realm = "users"
; * This is the new style grid service.
; * "Realm" is the table that is used for user lookup.
; * It defaults to "regions", which uses the legacy tables
; *
[GridService]
LocalServiceModule = "OpenSim.Services.GridService.dll:GridService"
StorageProvider = "OpenSim.Data.MySQL.dll:MySqlRegionData"
ConnectionString ="Data Source=localhost;Database=opensim;User
ID=root;Password=I have put one here;";
Realm = "regions"
----------------------------------------------------
GridCommon.ini settings
--------------------------------------------------
[AssetService]
DefaultAssetLoader = "OpenSim.Framework.AssetLoader.Filesystem.dll"
AssetLoaderArgs = "assets/AssetSets.xml"
;
; change this to your grid-wide asset server
;
AssetServerURI = "http://173.212.195.224:8003"
[InventoryService]
;
; change this to your grid-wide inventory server
;
InventoryServerURI = "http://173.212.195.224:8003"
[GridService]
;
; change this to your grid-wide grid server
;
GridServerURI = "http://173.212.195.224:8003"
[Modules]
;; Choose 0 or 1 cache modules, and the corresponding config file, if it
exists.
;; Copy the config .example file into your own .ini file and change
configs there
AssetCaching = "FlotsamAssetCache"
Include-FlotsamCache = "config-include/FlotsamCache.ini"
;AssetCaching = "CenomeMemoryAssetCache"
;Include-CenomeCache = "config-include/CenomeCache.ini"
;AssetCaching = "GlynnTuckerAssetCache"
;; Optionally, the port for the LLProxyLoginModule module can be changed
;Setup_LLProxyLoginModule = "9090/"
------------------------------------------------------------------------
I have set this up according to the OpenSimulator Grid tutorials. but they
are not finished it seems. Any ideas ?
Sonya
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://opensimulator.org/pipermail/opensim-users/attachments/20100114/247c0d04/attachment.html>
More information about the Opensim-users
mailing list