[Opensim-dev] (CreateUser) Http Post
Ovi Chris Rouly
maelzel at ieee.org
Sun Dec 9 15:59:11 UTC 2012
Hi Folks,
I've hesitated to say anything ... but frankly this thread has been
overwhelming: you've scared me!!!
I've used (will use again) the createUser functionality in my Agent-based
Models (based OS 0.7.2) AND it has worked just fine via C# program generated
calls from within OpenMetaverse.
Moreover, I plan to use the functionality again: since it is critical to the
success of my model's results.
Was the function changed in 0.7.3 - 0.7.4?
Worse, is this thread suggesting there will be "another" change (one
on-top-of another)?
Best regards,
Chris
Dept. of Comp. Soc. Sci.
George Mason University
>>>>>>>>>>>>>>>
----- Original Message -----
From: <opensim-dev-request at lists.berlios.de>
To: <opensim-dev at lists.berlios.de>
Sent: Sunday, December 09, 2012 6:00 AM
Subject: Opensim-dev Digest, Vol 64, Issue 4
> Send Opensim-dev mailing list submissions to
> opensim-dev at lists.berlios.de
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.berlios.de/mailman/listinfo/opensim-dev
> or, via email, send a message with subject or body 'help' to
> opensim-dev-request at lists.berlios.de
>
> You can reach the person managing the list at
> opensim-dev-owner at lists.berlios.de
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Opensim-dev digest..."
>
>
> Today's Topics:
>
> 1. Re: (CreateUser) Http Post (Kukuk Jacob)
> 2. Re: (CreateUser) Http Post (Marcel Verhagen)
> 3. Re: (CreateUser) Http Post (Michelle Argus)
> 4. Re: (CreateUser) Http Post (Kukuk Jacob)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 9 Dec 2012 06:36:08 +0000
> From: Kukuk Jacob <Jacob.Kukuk at lwtech.edu>
> To: "opensim at signpostmarv.name" <opensim at signpostmarv.name>,
> "opensim-dev at lists.berlios.de" <opensim-dev at lists.berlios.de>
> Subject: Re: [Opensim-dev] (CreateUser) Http Post
> Message-ID: <F8E5642226691548B59B8F39854AA4AA9236AB at Mail.lwtech.edu>
> Content-Type: text/plain; charset="us-ascii"
>
> Thanks for the responses, got that all resolved and setup, new issue now
is I have a web interface deal with renaming parcels. When I perform an
update to a parcel in the Land table it doesn't update the name in world.
When I change the name of the parcel in world it updates to the database
though. I have the opensim.ini use this database as the estate storage. Any
ideas?
> ________________________________________
> From: opensim-dev-bounces at lists.berlios.de
[opensim-dev-bounces at lists.berlios.de] on behalf of SignpostMarv Martin
[opensim at signpostmarv.name]
> Sent: Friday, December 07, 2012 12:38 PM
> To: opensim-dev at lists.berlios.de
> Subject: Re: [Opensim-dev] (CreateUser) Http Post
>
> With this particular scenario I've previously taken the approach of just
> piggy-backing on the API exposed by diva's wifi module.
>
> On 07/12/2012 05:04, Diva Canto wrote:
> > And the password is not stored on the same table...
> >
> > If you want to find out more about how to talk to the robust services,
> > take a look at OpenSim.Services.Connectors. If you're using .NET you
> > should be able to just reference that dll and use the connector
> > objects that already exist.
> >
> > On 12/6/2012 8:40 PM, Kukuk Jacob wrote:
> >> Hello everyone, so we are getting a grid setup and we are running
> >> into a slight problem with registration of users. We created a
> >> ASP.net HTTP XMLRPC POST that uses the method createuser but for some
> >> odd reason it returns Requested method [createuser] not found. We are
> >> running as a grid and using robust. Here is what we are working with.
> >>
> >> protected void join_btn_Click(object sender, EventArgs e)
> >> {
> >> CreateUser(new Uri("http://localhost:8003/"), "null",
> >> first_txt.Text, last_txt.Text, pass_txt.Text, email_txt.Text, 1000,
> >> 1000);
> >> }
> >>
> >> public void CreateUser(Uri url, string adminPassword, string
> >> firstName, string lastName, string password, string email, int
> >> regionX, int regionY)
> >> {
> >> var address =
Dns.GetHostEntry(url.DnsSafeHost).AddressList[0];
> >> var ht = new Hashtable();
> >> ht["user_firstname"] = firstName;
> >> ht["user_lastname"] = lastName;
> >> ht["user_password"] = password;
> >> ht["PrincipalID"] = "3a1c8128-908f-4455-8157-66c96a46f75e";
> >> var parameters = new List<Hashtable> { ht };
> >> var rpc = new XmlRpcRequest("createuser", parameters);
> >> rpc.Invoke(url.ToString());
> >> }
> >> _______________________________________________
> >> Opensim-dev mailing list
> >> Opensim-dev at lists.berlios.de
> >> https://lists.berlios.de/mailman/listinfo/opensim-dev
> >>
> >>
> >
> > _______________________________________________
> > Opensim-dev mailing list
> > Opensim-dev at lists.berlios.de
> > https://lists.berlios.de/mailman/listinfo/opensim-dev
> >
>
> _______________________________________________
> Opensim-dev mailing list
> Opensim-dev at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/opensim-dev
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 9 Dec 2012 10:41:03 +0100
> From: Marcel Verhagen <marceled9 at gmail.com>
> To: "opensim-dev at lists.berlios.de" <opensim-dev at lists.berlios.de>
> Subject: Re: [Opensim-dev] (CreateUser) Http Post
> Message-ID: <D67477D8-5BB0-4248-81AE-B8599AD8DDB3 at gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> Maybe clearing the viewer cache ?
>
> Op 9 dec. 2012 om 07:36 heeft Kukuk Jacob <Jacob.Kukuk at lwtech.edu> het
volgende geschreven:
>
> > Thanks for the responses, got that all resolved and setup, new issue now
is I have a web interface deal with renaming parcels. When I perform an
update to a parcel in the Land table it doesn't update the name in world.
When I change the name of the parcel in world it updates to the database
though. I have the opensim.ini use this database as the estate storage. Any
ideas?
> > ________________________________________
> > From: opensim-dev-bounces at lists.berlios.de
[opensim-dev-bounces at lists.berlios.de] on behalf of SignpostMarv Martin
[opensim at signpostmarv.name]
> > Sent: Friday, December 07, 2012 12:38 PM
> > To: opensim-dev at lists.berlios.de
> > Subject: Re: [Opensim-dev] (CreateUser) Http Post
> >
> > With this particular scenario I've previously taken the approach of just
> > piggy-backing on the API exposed by diva's wifi module.
> >
> > On 07/12/2012 05:04, Diva Canto wrote:
> >> And the password is not stored on the same table...
> >>
> >> If you want to find out more about how to talk to the robust services,
> >> take a look at OpenSim.Services.Connectors. If you're using .NET you
> >> should be able to just reference that dll and use the connector
> >> objects that already exist.
> >>
> >> On 12/6/2012 8:40 PM, Kukuk Jacob wrote:
> >>> Hello everyone, so we are getting a grid setup and we are running
> >>> into a slight problem with registration of users. We created a
> >>> ASP.net HTTP XMLRPC POST that uses the method createuser but for some
> >>> odd reason it returns Requested method [createuser] not found. We are
> >>> running as a grid and using robust. Here is what we are working with.
> >>>
> >>> protected void join_btn_Click(object sender, EventArgs e)
> >>> {
> >>> CreateUser(new Uri("http://localhost:8003/"), "null",
> >>> first_txt.Text, last_txt.Text, pass_txt.Text, email_txt.Text, 1000,
> >>> 1000);
> >>> }
> >>>
> >>> public void CreateUser(Uri url, string adminPassword, string
> >>> firstName, string lastName, string password, string email, int
> >>> regionX, int regionY)
> >>> {
> >>> var address =
Dns.GetHostEntry(url.DnsSafeHost).AddressList[0];
> >>> var ht = new Hashtable();
> >>> ht["user_firstname"] = firstName;
> >>> ht["user_lastname"] = lastName;
> >>> ht["user_password"] = password;
> >>> ht["PrincipalID"] = "3a1c8128-908f-4455-8157-66c96a46f75e";
> >>> var parameters = new List<Hashtable> { ht };
> >>> var rpc = new XmlRpcRequest("createuser", parameters);
> >>> rpc.Invoke(url.ToString());
> >>> }
> >>> _______________________________________________
> >>> Opensim-dev mailing list
> >>> Opensim-dev at lists.berlios.de
> >>> https://lists.berlios.de/mailman/listinfo/opensim-dev
> >>>
> >>>
> >>
> >> _______________________________________________
> >> Opensim-dev mailing list
> >> Opensim-dev at lists.berlios.de
> >> https://lists.berlios.de/mailman/listinfo/opensim-dev
> >>
> >
> > _______________________________________________
> > Opensim-dev mailing list
> > Opensim-dev at lists.berlios.de
> > https://lists.berlios.de/mailman/listinfo/opensim-dev
> > _______________________________________________
> > Opensim-dev mailing list
> > Opensim-dev at lists.berlios.de
> > https://lists.berlios.de/mailman/listinfo/opensim-dev
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 09 Dec 2012 13:07:24 +0100
> From: Michelle Argus <argus at archimuh.de>
> To: opensim-dev at lists.berlios.de
> Subject: Re: [Opensim-dev] (CreateUser) Http Post
> Message-ID: <50C47EFC.9020507 at archimuh.de>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Changing the data in the Database directly in most cases require a
> simulator restart. When shutting down a simulator it will however often
> update the databse with old data, so you should do the changes while the
> simulator is offline.
>
> These kind of changes should best be done by the simulator which then
> also sends a viewer update to the avatars already on the region. For
> this one can use the RemoteAdmin module and add the new functions you
need.
>
> Am 09.12.2012 07:36, schrieb Kukuk Jacob:
> > Thanks for the responses, got that all resolved and setup, new issue now
is I have a web interface deal with renaming parcels. When I perform an
update to a parcel in the Land table it doesn't update the name in world.
When I change the name of the parcel in world it updates to the database
though. I have the opensim.ini use this database as the estate storage. Any
ideas?
> > ________________________________________
> > From: opensim-dev-bounces at lists.berlios.de
[opensim-dev-bounces at lists.berlios.de] on behalf of SignpostMarv Martin
[opensim at signpostmarv.name]
> > Sent: Friday, December 07, 2012 12:38 PM
> > To: opensim-dev at lists.berlios.de
> > Subject: Re: [Opensim-dev] (CreateUser) Http Post
> >
> > With this particular scenario I've previously taken the approach of just
> > piggy-backing on the API exposed by diva's wifi module.
> >
> > On 07/12/2012 05:04, Diva Canto wrote:
> >> And the password is not stored on the same table...
> >>
> >> If you want to find out more about how to talk to the robust services,
> >> take a look at OpenSim.Services.Connectors. If you're using .NET you
> >> should be able to just reference that dll and use the connector
> >> objects that already exist.
> >>
> >> On 12/6/2012 8:40 PM, Kukuk Jacob wrote:
> >>> Hello everyone, so we are getting a grid setup and we are running
> >>> into a slight problem with registration of users. We created a
> >>> ASP.net HTTP XMLRPC POST that uses the method createuser but for some
> >>> odd reason it returns Requested method [createuser] not found. We are
> >>> running as a grid and using robust. Here is what we are working with.
> >>>
> >>> protected void join_btn_Click(object sender, EventArgs e)
> >>> {
> >>> CreateUser(new Uri("http://localhost:8003/"), "null",
> >>> first_txt.Text, last_txt.Text, pass_txt.Text, email_txt.Text, 1000,
> >>> 1000);
> >>> }
> >>>
> >>> public void CreateUser(Uri url, string adminPassword, string
> >>> firstName, string lastName, string password, string email, int
> >>> regionX, int regionY)
> >>> {
> >>> var address =
Dns.GetHostEntry(url.DnsSafeHost).AddressList[0];
> >>> var ht = new Hashtable();
> >>> ht["user_firstname"] = firstName;
> >>> ht["user_lastname"] = lastName;
> >>> ht["user_password"] = password;
> >>> ht["PrincipalID"] = "3a1c8128-908f-4455-8157-66c96a46f75e";
> >>> var parameters = new List<Hashtable> { ht };
> >>> var rpc = new XmlRpcRequest("createuser", parameters);
> >>> rpc.Invoke(url.ToString());
> >>> }
> >>> _______________________________________________
> >>> Opensim-dev mailing list
> >>> Opensim-dev at lists.berlios.de
> >>> https://lists.berlios.de/mailman/listinfo/opensim-dev
> >>>
> >>>
> >> _______________________________________________
> >> Opensim-dev mailing list
> >> Opensim-dev at lists.berlios.de
> >> https://lists.berlios.de/mailman/listinfo/opensim-dev
> >>
> > _______________________________________________
> > Opensim-dev mailing list
> > Opensim-dev at lists.berlios.de
> > https://lists.berlios.de/mailman/listinfo/opensim-dev
> > _______________________________________________
> > Opensim-dev mailing list
> > Opensim-dev at lists.berlios.de
> > https://lists.berlios.de/mailman/listinfo/opensim-dev
> >
>
>
>
> ------------------------------
>
> Message: 4
> Date: Sun, 9 Dec 2012 10:15:17 +0000
> From: Kukuk Jacob <Jacob.Kukuk at lwtech.edu>
> To: "opensim-dev at lists.berlios.de" <opensim-dev at lists.berlios.de>
> Subject: Re: [Opensim-dev] (CreateUser) Http Post
> Message-ID: <e9aoxujbwki3jv7bgwmni6j9.1355048112904 at email.android.com>
> Content-Type: text/plain; charset="us-ascii"
>
> will check that option out, thanks for the info.
>
> Jacob Kukuk
>
> Sent from my Samsung smartphone on AT&T
>
>
> Michelle Argus wrote:
>
> Changing the data in the Database directly in most cases require a
> simulator restart. When shutting down a simulator it will however often
> update the databse with old data, so you should do the changes while the
> simulator is offline.
>
> These kind of changes should best be done by the simulator which then
> also sends a viewer update to the avatars already on the region. For
> this one can use the RemoteAdmin module and add the new functions you
need.
>
> Am 09.12.2012 07:36, schrieb Kukuk Jacob:
> > Thanks for the responses, got that all resolved and setup, new issue now
is I have a web interface deal with renaming parcels. When I perform an
update to a parcel in the Land table it doesn't update the name in world.
When I change the name of the parcel in world it updates to the database
though. I have the opensim.ini use this database as the estate storage. Any
ideas?
> > ________________________________________
> > From: opensim-dev-bounces at lists.berlios.de
[opensim-dev-bounces at lists.berlios.de] on behalf of SignpostMarv Martin
[opensim at signpostmarv.name]
> > Sent: Friday, December 07, 2012 12:38 PM
> > To: opensim-dev at lists.berlios.de
> > Subject: Re: [Opensim-dev] (CreateUser) Http Post
> >
> > With this particular scenario I've previously taken the approach of just
> > piggy-backing on the API exposed by diva's wifi module.
> >
> > On 07/12/2012 05:04, Diva Canto wrote:
> >> And the password is not stored on the same table...
> >>
> >> If you want to find out more about how to talk to the robust services,
> >> take a look at OpenSim.Services.Connectors. If you're using .NET you
> >> should be able to just reference that dll and use the connector
> >> objects that already exist.
> >>
> >> On 12/6/2012 8:40 PM, Kukuk Jacob wrote:
> >>> Hello everyone, so we are getting a grid setup and we are running
> >>> into a slight problem with registration of users. We created a
> >>> ASP.net HTTP XMLRPC POST that uses the method createuser but for some
> >>> odd reason it returns Requested method [createuser] not found. We are
> >>> running as a grid and using robust. Here is what we are working with.
> >>>
> >>> protected void join_btn_Click(object sender, EventArgs e)
> >>> {
> >>> CreateUser(new Uri("http://localhost:8003/"), "null",
> >>> first_txt.Text, last_txt.Text, pass_txt.Text, email_txt.Text, 1000,
> >>> 1000);
> >>> }
> >>>
> >>> public void CreateUser(Uri url, string adminPassword, string
> >>> firstName, string lastName, string password, string email, int
> >>> regionX, int regionY)
> >>> {
> >>> var address =
Dns.GetHostEntry(url.DnsSafeHost).AddressList[0];
> >>> var ht = new Hashtable();
> >>> ht["user_firstname"] = firstName;
> >>> ht["user_lastname"] = lastName;
> >>> ht["user_password"] = password;
> >>> ht["PrincipalID"] = "3a1c8128-908f-4455-8157-66c96a46f75e";
> >>> var parameters = new List<Hashtable> { ht };
> >>> var rpc = new XmlRpcRequest("createuser", parameters);
> >>> rpc.Invoke(url.ToString());
> >>> }
> >>> _______________________________________________
> >>> Opensim-dev mailing list
> >>> Opensim-dev at lists.berlios.de
> >>> https://lists.berlios.de/mailman/listinfo/opensim-dev
> >>>
> >>>
> >> _______________________________________________
> >> Opensim-dev mailing list
> >> Opensim-dev at lists.berlios.de
> >> https://lists.berlios.de/mailman/listinfo/opensim-dev
> >>
> > _______________________________________________
> > Opensim-dev mailing list
> > Opensim-dev at lists.berlios.de
> > https://lists.berlios.de/mailman/listinfo/opensim-dev
> > _______________________________________________
> > Opensim-dev mailing list
> > Opensim-dev at lists.berlios.de
> > https://lists.berlios.de/mailman/listinfo/opensim-dev
> >
>
> _______________________________________________
> Opensim-dev mailing list
> Opensim-dev at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/opensim-dev
>
>
> ------------------------------
>
> _______________________________________________
> Opensim-dev mailing list
> Opensim-dev at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/opensim-dev
>
> End of Opensim-dev Digest, Vol 64, Issue 4
> ******************************************
>
More information about the Opensim-dev
mailing list