Startup script linux

From OpenSimulator

Revision as of 17:38, 6 November 2013 by Justincc (Talk | contribs)

Jump to: navigation, search

Contents

/etc/init.d script for Linux

Instructions

Tested on Debian 5. CHUIDS user to opensim user. Supports: start, stop, restart, status

To implement: Type: cat > /etc/init.d/opensim Paste in script from this page Press: CTRL+D Type: chmod +x /etc/init.d/opensim Script should now be located on server and be executable.

Modify header in script to adapt it to your installation folder and user.

Updated script by justincc

Unlike Tedd's original script below, this relies on OpenSimulator's own PID functionality to work, so you must uncomment the PIDFile entries in the [Startup] section of OpenSim.ini/Robust.ini and set them to /tmp/OpenSim.exe.pid and /tmp/Robust.exe.pid as appropriate.

This allows us to simplify the script and get better error reporting. Cleanly shutting down OpenSimulator has also been implemented.

The delay between attempting clean shutdown and force shutting down has been doubled to 20 seconds. However, in some cases this still might not be enough. In the future, it would be better to poll for status.

This script is maintained at https://github.com/justincc/opensimulator-tools/blob/master/infrastructure/init.d/src/opensim Pull requests welcome!

#! /bin/sh
### BEGIN INIT INFO
# Provides:          OpenSimulator
# Required-Start:    $local_fs $network 
# Required-Stop:     $local_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Tedds OpenSimulator init.d-script, with further changes by Justin Clark-Casey (http://justincc.org)
### END INIT INFO
 
# Put script in /etc/init.d/
# Then execute /etc/init.d/opensim <start>|<stop>|<restart>|<status>
#
# You must configure Robust and OpenSim to create Robust.exe.pid and OpenSim.exe.pid PID files
# by configuring PIDFile in the [Startup] section of OpenSim.ini and Robust.ini
 
set -e
 
# Location of OpenSimulator binaries
DIR=/opt/opensim/bin
 
# The directory where OpenSimulator and Robust are placing their pid files.  These must be of the form <service-name>.pid
# e.g. OpenSim.exe.pid
PIDDIR=/tmp/
 
# The user name which will execute the services
USER=opensim
 
SERVICES="Robust.exe OpenSim.exe"
 
#
# Kill values (in seconds)
#
# How long between each service being started
DELAY_STARTUP=10
# How long between each service is sent shutdown command
DELAY_KILL=20
# After shutdown has been sent to all we do another loop with "kill", then "kill -9". How long between "kill" and "kill -9".
DELAY_FORCEKILL=10
 
#
# Info on service handled by this script
 
# Name of service
NAME=opensim
# Description of service
DESC="OpenSimulator Server"
 
# Binaries
SCREEN=/usr/bin/screen
MONO=/usr/bin/mono
 
###########################
##### START OF SCRIPT #####
###########################
 
export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"
 
# Load LSB log functions
_lsbFile=""
if [ -e /etc/debian_version ]; then
    _lsbFile="/lib/lsb/init-functions"
    if [ -f $_lsbFile ]; then
        . $_lsbFile
    else
        echo "This script requires LSB init-functions file which does not exist: $_lsbFile"
        exit 1
    fi
else
# [ -e /etc/init.d/functions ] ; then
    _lsbFile="/etc/init.d/functions"
    if [ -e $_lsbFile ]; then
        . $_lsbFile
    else
        echo "This script requires LSB init-functions file which does not exist: $_lsbFile"
        exit 1
    fi
fi
 
# Lets use fancy output
log_use_fancy_output
 
# Check that target directory exists
if test ! -d "$DIR"; then
    log_failure_msg "$NAME" "Target directory \"$DIR\" does not exist. Can not continue."
    exit 1
fi
 
# Create a reverse order for shutdown
SERVICES_REVERSE=""
reverse() { SERVICES_REVERSE="$9 $8 $7 $6 $5 $4 $3 $2 $1"; }
reverse $SERVICES
 
# Check if a service is running
isrunning() { 
    ISRUNNING="0"
    # Do we have PID-file?
    if [ -f "$PIDDIR/$1.pid" ]; then
        # Check if proc is running
        pid=`cat "$PIDDIR/$1.pid" 2> /dev/null`
        if [ "$pid" != "" ]; then
            if [ -d /proc/$pid ]; then
                # Process is running
                ISRUNNING="1"
            fi
        fi
    fi
    #ISRUNNING="0"
}
 
#
# Process commands
#
case "$1" in
start)
    # Start all services one by one
    for server in $SERVICES; do
        log_daemon_msg "Starting $NAME" "$server"
 
        isrunning $server
        case "$ISRUNNING" in
            1) log_daemon_msg "Process already started. Please stop first"; log_end_msg 1 ;;
            0) 
                # Process is not running
                # Start process and sleep...
                exefile="/tmp/exe.OpenSim.$server.sh"
 
                # Need to make external file, had big problems with screen params
                echo \#\!/bin/bash > $exefile
                echo cd $DIR >> $exefile
                echo $MONO $server >> $exefile
                chmod +x $exefile
 
                cmd_screen="-S $server -d -m $exefile"
                start-stop-daemon --start --pidfile $PIDDIR/$server.pid -u $USER --chdir $DIR --chuid $USER -x /usr/bin/screen -- $cmd_screen
 
                # Delay between services that are started
                sleep $DELAY_STARTUP
 
                rm $exefile 2> /dev/null
 
                isrunning $server
                case "$ISRUNNING" in
                    1) 
                        # Process started ok
                        #log_daemon_msg "Success"; 
                        log_end_msg 0 
                        ;;
                    0) 
                        #log_daemon_msg "Failure"; 
                        log_end_msg 1 
                        ;;
                esac
                ;;
        esac
    done
    ;;
 
stop)
    _killCount=0
 
    for server in $SERVICES_REVERSE; do
        log_daemon_msg "Stopping $NAME" "$server"
 
        isrunning $server
        case "$ISRUNNING" in
        1) 
            _killCount=`expr $_killCount + 1`
            log_daemon_msg "Sending shutdown command:"; 
 
            cmd_screen="$SCREEN -S $server -X quit"
            start-stop-daemon --stop --pidfile $PIDDIR/$server.pid -u $USER --chuid $USER -- $cmd_screen
 
            # Wait for it to shut down...
            sleep $DELAY_KILL
 
            isrunning $server
            case "$ISRUNNING" in
                1) log_daemon_msg "$server is still running."; log_end_msg 0 ;;
                0) log_daemon_msg "$server has been shutdown"; log_end_msg 0 ;;
            esac
 
            ;;
        0) 
            log_daemon_msg "$server is not running"; log_end_msg 0
            ;;
        esac
 
    done
 
    # Check if any procs are still running
    for server in $SERVICES; do
        isrunning $server
        case "$ISRUNNING" in
        1) 
            log_warning_msg "Stopping $NAME" "$server is still running: Forcing kill"
            echo `kill $pid 2> /dev/null`;
            sleep $DELAY_FORCEKILL
            echo `kill -9 $pid 2> /dev/null`;
            sleep 1
 
            # Now check again if it is still running...
            isrunning $server
            case "$ISRUNNING" in
                0) log_daemon_msg "Success"; log_end_msg 0 ;;
                1) log_daemon_msg "Process is still running... Even after \"kill -9 $pid\". WOW..."; log_end_msg 0 ;;
            esac
            ;;
        0) 
            #log_daemon_msg ""; 
            ;;
        esac
    done
 
    log_daemon_msg "$NAME: All done (killed $_killCount procs)"; log_end_msg 0
 
    ;;
 
status)
    # Count how many processes we need
    PROCCOUNT=0
    for i in $SERVICES; do
        PROCCOUNT=`expr $PROCCOUNT + 1`
    done
 
    # Go through server PID files and count how many are running
    log_daemon_msg "$NAME: Running processes:"
    _pidCount=0
    for server in $SERVICES; do
 
        isrunning $server
        case "$ISRUNNING" in
            1) 
                # This server is running
                _pidCount=`expr $_pidCount + 1`
                log_daemon_msg "$server"
                ;;
            0) 
                ;;
        esac
    done
 
    log_daemon_msg " ($_pidCount of $PROCCOUNT processes are running)"
 
    # Check if running proc count matches requires proc count
    if [ $_pidCount -eq $PROCCOUNT ]; then
        log_daemon_msg "$NAME is running"
        exit 0
    else
        log_daemon_msg "$NAME is NOT running"
        exit 1
    fi
    ;;
 
restart)
    $0 stop
    $0 start
    ;;
*)
    echo "Usage: /etc/init.d/$NAME {start|stop|restart|status}" >&2
    exit 1
    ;;
esac
 
exit 0

Tedd's Original Script

#! /bin/sh
 ### BEGIN INIT INFO
 # Provides:          OpenSimulator
 # Required-Start:    $local_fs $network 
 # Required-Stop:     $local_fs
 # Default-Start:     2 3 4 5
 # Default-Stop:      0 1 6
 # Short-Description: Tedds OpenSimulator init.d-script
 ### END INIT INFO
 
 # Put script in /etc/init.d/
 # then execute: update-rc.d opensim defaults
 
 set -e
 
 #
 # Directories
 #
 # Location of OpenSimulator installation
 DIR=/home/opensim/OpenSim/bin/
 # Different PID dir?
 PIDDIR=$DIR
 
 USER=opensim
 SERVICES="Robust.exe OpenSim.exe"
 
 #
 # Kill values (in seconds)
 #
 # How long between each service being started
 DELAY_STARTUP=10
 # How long between each service is sent shutdown command
 DELAY_KILL=10
 # After shutdown has been sent to all we do another loop with "kill", then "kill -9". How long between "kill" and "kill -9".
 DELAY_FORCEKILL=10
 
 #
 # Info on service handled by this script
 
 # Name of service
 NAME=opensim
 # Description of service
 DESC="OpenSimulator Server"
 
 # Binaries
 SCREEN=/usr/bin/screen
 MONO=/usr/bin/mono
 
 ###########################
 ##### START OF SCRIPT #####
 ###########################
 
 export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"
 
 
 
 # Load LSB log functions
 _lsbFile=""
 if [ -e /etc/debian_version ]; then
     _lsbFile="/lib/lsb/init-functions"
     if [ -f $_lsbFile ]; then
         . $_lsbFile
     else
         echo "This script requires LSB init-functions file which does not exist: $_lsbFile"
         exit 1
     fi
 else
 # [ -e /etc/init.d/functions ] ; then
     _lsbFile="/etc/init.d/functions"
     if [ -e $_lsbFile ]; then
         . $_lsbFile
     else
         echo "This script requires LSB init-functions file which does not exist: $_lsbFile"
         exit 1
     fi
 fi
 
 # Lets use fancy output
 log_use_fancy_output
 
 # Check that target directory exists
 if test ! -d "$DIR"; then
     log_failure_msg "$NAME" "Target directory \"$DIR\" does not exist. Can not continue."
     exit 1
 fi
 
 # Create a reverse order for shutdown
 SERVICES_REVERSE=""
 reverse() { SERVICES_REVERSE="$9 $8 $7 $6 $5 $4 $3 $2 $1"; }
 reverse $SERVICES
 
 # Check if a service is running
 isrunning() { 
     ISRUNNING="0"
     # Do we have PID-file?
     if [ -f "$PIDDIR/$1.pid" ]; then
         # Check if proc is running
         pid=`cat "$PIDDIR/$1.pid" 2> /dev/null`
         if [ "$pid" != "" ]; then
             if [ -d /proc/$pid ]; then
                 # Process is running
                 ISRUNNING="1"
             fi
         fi
     fi
     #ISRUNNING="0"
 }
 
 #
 # Process commands
 #
 case "$1" in
 start)
     # Start all services one by one
     for server in $SERVICES; do
         log_daemon_msg "Starting $NAME" "$server"
 
         isrunning $server
         case "$ISRUNNING" in
             1) log_progress_msg "Process already started. Please stop first"; log_end_msg 1 ;;
             0) 
                 # Process is not running
                 # Start process and sleep...
                 exefile="/tmp/exe.OpenSim.$server.sh"
 
                 # Need to make external file, had big problems with screen params
                 echo \#\!/bin/bash > $exefile
                 echo cd $DIR >> $exefile
                 echo $MONO $server >> $exefile
                 chmod +x $exefile
 
                 cmd_screen="screen -S $server -d -m $exefile"
                 start-stop-daemon --start -b -x /bin/su -m --pidfile=/tmp/su.$server.pid --chdir "$DIR" -- - $USER "-c $cmd_screen"
 
                 # Delay between services that are started
                 sleep $DELAY_STARTUP
 
                 rm $exefile 2> /dev/null
 
                 # Make PID-file
                 ps afxu | grep "mono $server" | grep -iEv "grep|screen" | awk {'print $2'} > "$PIDDIR/$server.pid"
 
                 isrunning $server
                 case "$ISRUNNING" in
                     1) 
                         # Process started ok
                         #log_progress_msg "Success"; 
                         log_end_msg 0 
                         ;;
                     0) 
                         # Process did not start... remove pid-file
                         rm "$PIDDIR/$server.pid" 2> /dev/null
                         #log_progress_msg "Failure"; 
                         log_end_msg 1 
                         ;;
                 esac
                 ;;
         esac
 
     done
     ;;
 
 
 
 stop)
     _killCount=0
 
     for server in $SERVICES_REVERSE; do
         log_daemon_msg "Stopping $NAME" "$server"
 
         isrunning $server
         case "$ISRUNNING" in
         1) 
             _killCount=`expr $_killCount + 1`
             log_progress_msg "Sending shutdown command:"; 
 
             cmd_screen="screen -S $server -X quit"
             su $USER -c "$cmd_screen"
 
             # Wait for it to shut down...
             sleep $DELAY_KILL
 
             isrunning $server
             case "$ISRUNNING" in
                 1) log_progress_msg "is still running."; log_end_msg 0 ;;
                 0) log_progress_msg "has been shutdown"; log_end_msg 0 ;;
             esac
 
             ;;
         0) 
             log_progress_msg "is not running"; log_end_msg 0
             ;;
         esac
 
     done
 
     # Check if any procs are still running
     for server in $SERVICES; do
         isrunning $server
         case "$ISRUNNING" in
         1) 
             log_warning_msg "Stopping $NAME" "$server is still running: Forcing kill"
             echo `kill $pid 2> /dev/null`;
             sleep $DELAY_FORCEKILL
             echo `kill -9 $pid 2> /dev/null`;
             sleep 1
 
             # Now check again if it is still running...
             isrunning $server
             case "$ISRUNNING" in
                 0) log_progress_msg "Success"; log_end_msg 0 ;;
                 1) log_progress_msg "Process is still running... Even after \"kill -9 $pid\". WOW..."; log_end_msg 0 ;;
             esac
             ;;
         0) 
             #log_progress_msg ""; 
             ;;
         esac
     done
 
     log_begin_msg "$NAME: All done (killed $_killCount procs)"; log_end_msg 0
 
     ;;
 
 
 
 
 
 status)
     # Count how many processes we need
     PROCCOUNT=0
     for i in $SERVICES; do
         PROCCOUNT=`expr $PROCCOUNT + 1`
     done
 
     # Go through server PID files and count how many are running
     log_begin_msg "$NAME: Running processed:"
     _pidCount=0
     for server in $SERVICES; do
 
         isrunning $server
         case "$ISRUNNING" in
             1) 
                 # This server is running
                 _pidCount=`expr $_pidCount + 1`
                 log_progress_msg "$server"
                 ;;
             0) 
                 ;;
         esac
     done
 
     log_begin_msg " ($_pidCount of $PROCCOUNT processes are running)"; log_end_msg 0
 
     # Check if running proc count matches requires proc count
     log_begin_msg "$NAME is"
     if [ $_pidCount -eq $PROCCOUNT ]; then
         log_progress_msg "running"; log_end_msg 0
         exit 0
     else
         log_progress_msg "NOT running"; log_end_msg 0
         exit 1
     fi
     ;;
 
 restart)
     $0 stop
     $0 start
     ;;
 *)
     echo "Usage: /etc/init.d/$NAME {start|stop|restart|status}" >&2
     exit 1
     ;;
 esac
 
 exit 0
Personal tools
General
About This Wiki