NAT Loopback Routers

From OpenSimulator

Revision as of 11:57, 11 March 2010 by Thomax (Talk | contribs)

Jump to: navigation, search



This page show a list of routers supporting NAT Loopback feature in order to be able to TP in your region when you host it at home on the same computer or local network. Please, feel free to contribute such a list especially if these routers are cheap :D

SPECIAL NOTE:  Due to the extensive list of routers and capabilities, this is only a basic listing of reported known good routers & modem-router combos and known working devices. 

"D-Link DGL-4xxx series of routers have the largest available nat table of any router on the market.  These routers range from 70$-180$ USD depending on where you live and purchase from."

Other routers & Hardware

KNOWN non-functional for OpenSim:


REFERENCE LINKS:

Thompson Electronics:  http://www.thomsonbroadbandpartner.com/dsl-modems-gateways/products/index.php



For Linux based Netfilter (iptables) routers, you want to set up the NAT table with some extra entries The following script is something to get you started, you'll need to fix up the variables at the top to match your system and network.
#!/bin/bash
#
# vvvvv - Fix these! - vvvvv
IPTABLES=/usr/sbin/iptables
LAN_NETWORK=192.168.0.0/24
SERVER_IP=192.168.0.2
INTERNET_IP=100.100.100.100
REMOTING_PORT=8895
REGION_PORT=9000
# ^^^^^ - Fix these! - ^^^^^
 
# First, the Destination NAT, anything going to the external address on our ports, we redirect to the server
# Note, if you have a double NAT running and this router doesn't actually have the internet IP address, you'll
# need another set of PREROUTING-DNAT lines with the --destination (-d) set to the internet facing private address
$IPTABLES -t nat -I PREROUTING -d $INTERNET_IP -p tcp --dport $REMOTING_PORT --jump DNAT --to-destination $SERVER_IP
$IPTABLES -t nat -I PREROUTING -d $INTERNET_IP -p udp --dport $REGION_PORT --jump DNAT --to-destination $SERVER_IP
$IPTABLES -t nat -I PREROUTING -d $INTERNET_IP -p tcp --dport $REGION_PORT --jump DNAT --to-destination $SERVER_IP
 
# Second, the Source NAT, we need this so that returning packets to our LAN clients go back through the router first,
# otherwise, the server will try to talk directly to the client and the client will reject them
$IPTABLES -t nat -I POSTROUTING -s $LAN_NETWORK -d $SERVER_IP -p tcp --dport $REMOTING_PORT --jump SNAT --to-source $INTERNET_IP
$IPTABLES -t nat -I POSTROUTING -s $LAN_NETWORK -d $SERVER_IP -p udp --dport $REGION_PORT --jump SNAT --to-source $INTERNET_IP
$IPTABLES -t nat -I POSTROUTING -s $LAN_NETWORK -d $SERVER_IP -p tcp --dport $REGION_PORT --jump SNAT --to-source $INTERNET_IP

--Hell Fire

openWRT Routers:

If you use openWRT firmware on your router, check here: OpenWRT NATLoopback

Personal tools
General
About This Wiki