Configuration/files/OpenSim/OpenSim.ini/fr

From OpenSimulator

(Difference between revisions)
Jump to: navigation, search
([Startup])
([Startup])
Line 290: Line 290:
 
     ; emailmodule = DefaultEmailModule
 
     ; emailmodule = DefaultEmailModule
  
     ;# {SpawnPointRouting} {} {Set routing method for Telehub Spawnpoints} {closest random sequence} closest
+
     ;# {SpawnPointRouting} {} {Définir une méthode de routage pour les points d'arrivées du Telehub} {closest random sequence} closest
     ;; SpawnPointRouting adjusts the landing for incoming avatars.
+
     ;; SpawnPointRouting organise l'arrivée des avatars entrants.
     ;; "closest" will place the avatar at the SpawnPoint located in the closest
+
     ;; "closest" placera l'avatar sur le SpawnPoint disponible le plus proche
     ;; available spot to the destination (typically map click/landmark).
+
     ;; de la destination (normalement clic sur la carte/landmark).
     ;; "random" will place the avatar on a randomly selected spawnpoint;
+
     ;; "random" placera l'avatar sur un spawnpoint sélectionné au hasard.
     ;; "sequence" will place the avatar on the next sequential SpawnPoint
+
     ;; "sequence" placera l'avatar sur sur le SpawnPoint séquentiel suivant.
 
     ; SpawnPointRouting = closest
 
     ; SpawnPointRouting = closest
  
     ;# {TelehubAllowLandmark} {} {Allow users with landmarks to override telehub routing} {true false} false
+
     ;# {TelehubAllowLandmark} {} {Permettre au utilisateurs qui utilisent des landmarks d'ignorer le routage du telehub} {true false} false
     ;; TelehubAllowLandmark allows users with landmarks to override telehub
+
     ;; TelehubAllowLandmark permet aux utilisateurs avec landmarks d'ignorer le routage du telehub
     ;; routing and land at the landmark coordinates when set to true
+
     ;; et d'arriver au coordonnées de la landmark quand ce paramètre est défini à true
     ;; default is false
+
     ;; la valeur par défaut est false
 
     ; TelehubAllowLandmark = false
 
     ; TelehubAllowLandmark = false
  

Revision as of 05:53, 11 November 2016

Contents

OpenSim.ini

Fichier de la version 0.9.0-425-ge38f16d d'OpenSimulator. (Traduction en cours.)

;; Ce fichier est le fichier principal de configuration d'OpenSimulator.
;; S'il se nomme OpenSim.ini alors il sera chargé par OpenSimulator.
;; Si son nom est OpenSim.ini.example alors vous devez tout d'abord en faire une copie 
;; que vous nommerez OpenSim.ini (si ce fichier n'existe pas encore)
;;
;; Après avoir copié OpenSim.ini.example en OpenSim.ini vous devez au moins
;; définir les constantes dans la section [Const] et choisir une architecture
;; dans la section [Architecture] à la fin de ce fichier. L'architecture
;; requiert le fichier .ini approprié qui est placé dans le dossier config-include.
;; Ce sera StandaloneCommon.ini ou GridCommon.ini que vous pouvez copier et modifier 
;; depuis les fichiers .example disponibles.
;;
;; Les paramètres dans ce fichier se présentent sous la forme "<key> = <value>".  Par exemple, 
;; save_crashes = false dans la section [Startup] ci-dessous.
;;
;; Tous les paramètres sont initialement commentés et les valeurs par défaut sont utilisées,  
;; comme ils sont indiqués dans OpenSimDefaults.ini. Pour modifier un paramètre, tout d'abord décommentez-le 
;; en supprimant le point virgule initial (;) et ensuite remplacez sa valeur. Cela écrasera
;; la valeur définie dans OpenSimDefaults.ini
;; 
;; Si vous voulez savoir quelles configurations OpenSimulator utilise au final, une fois tous les 
;; fichiers de configuration chargés, alors tapez "config show" sur
;; la ligne de commande de la console de région.
;;
;; 
;; NOTES POUR LES DÉVELOPPEURS CONCERNANT LE FORMAT DE CE FICHIER
;;
;; Tous les blancs d'en-tête sont ignorés, mais conservés.
;;
;; Les doubles points virgule concernent un texte commenté.
;;
;; ;# désigne une description de la directive de configuration
;;    formattée ainsi :
;;    {option} {dépend de} {question à poser} {choix} valeur par défaut
;;    Tout le reste du texte qui commente la déclaration, et qui se termine à la prochaine 
;;    ligne vide, sera copié dans le fichier généré (NOTE: la génération n'est pas encore
;;    implémentée pour l'instant).
;;
;;    Un * dans une liste de choix permet une entrée vide.
;;    Une question vide définira la valeur par défaut, si les dépendances
;;    sont satisfaites.
;;
;; ;  désigne une option commentée.
;;    Toutes les options ajoutées dans OpenSim.ini.example  devraient être initialement 
;;    commentées.

[Const]

   ; Pour une grille, ces paramètres seront généralement le nom  IP / DNS  externe,
   ; le port public par défaut 8002 et le port privé par défaut 8003.
   ; Pour une standalone ce sera  généralement le nom IP/DNS externe et
   ; le port public par défaut 9000. Le port privé n'est pas utilisé
   ; dans la configuration d'une standalone.
   ;# {BaseURL} {} {BaseURL} {"http://example.com" "http://127.0.0.1"} "http://127.0.0.1"
   BaseURL = http://127.0.0.1
   
   ;# {PublicPort} {} {PublicPort} {8002 9000} "8002"
   PublicPort = "8002"
   ;# {PrivatePort} {} {PrivatePort} {8003} "8003"
   PrivatePort = "8003"

[Startup]

   ;# {ConsolePrompt} {} {ConsolePrompt} {} "Region (\R) "
   ;; Invite de la console
   ;; Certains caractères spéciaux peuvent être utilisés pour personnaliser l'invite
   ;; Actuellement, ce sont 
   ;; \R - remplace le nom de la région
   ;; \\ - remplace \
   ; ConsolePrompt = "Region (\R) "
   ;# {ConsoleHistoryFileEnabled} {} {Enregistrer les commandes de console dans un fichier historique ?} {true false} true
   ;; Les commandes de console peuvent être sauvegardées dans un fichier, ainsi l'historique des commandes persiste après
   ;; redémarrage. (la valeur par défaut est false)
   ; ConsoleHistoryFileEnabled = true
   ;# {ConsoleHistoryFile} {} {Nom du fichier où enregistrer l'historique} {} OpenSimConsoleHistory.txt
   ;; Le fichier de l'historique peut être un simple nom de fichier (relatif au dossier bin/ d'OpenSim's)
   ;; ou il peut être le chemin complet vers un autre emplacement. (la valeur par défaut est OpenSimConsoleHistory.txt dans bin/)
   ; ConsoleHistoryFile = "OpenSimConsoleHistory.txt"
   ;# {ConsoleHistoryFileLines} {} {Combien de lignes l'historique doit-il enregistrer ?} {} 100
   ;; Combien de lignes de commandes l'historique doit conserver ? (la valeur par défaut est 100)
   ; ConsoleHistoryFileLines = 100
   ;# {save_crashes} {} {Faut-il enregistrer les  crashes sur le disque ?} {true false} false
   ;; Définir ce paramètre à  true si vous voulez enregistrer les crashes sur le disque
   ;; cela peut-être utilise quand vous envoyez des rapports de bug.
   ;; Cependant, seuls seront enregistrés les crashes d'OpenSimulator qui provoquent 
   ;; une sortie complète du programme.
   ;; Il ne consignera pas les accidents dus aux défaillances de la machine virtuelle, ce qui
   ;; inclut mono et les échecs de ODE.
   ;; Vous devez capturer  la séquence des appels  au moment de l'erreur en enregistrant
   ;; le journal de la session elle-même.
   ; save_crashes = false
   ;# {crash_dir} {save_crashes:true} {Dossier où enregistrer les crashes ?} {} crashes
   ;; Dossier où enregistrer les crashes si cette option est activé ci-dessus.
   ;; (la valeur par défaut est /opensimdir/crashes/*.txt ou C:\opensim\crashes\*.txt)
   ; crash_dir = "crashes"
   ;# {PIDFile} {} {Chemin vers le fichier PID ?} {}
   ;; Endroit où créer un fichier PID
   ; PIDFile = "/tmp/OpenSim.exe.pid"
   ;# {RegistryLocation} {} {Localisation des suppléments du registre } {}
   ; Definit le chemin vers le dossier des suppléments du registre si vous voulez placer ces suppléments en dehors de bin.  
   ; Les informations au sujet des dépôts enregistrés et les plugins installés seront  
   ; stockés ici. Le porcessus OpenSim.exe doit avoir les droits d'écriture et de lecture pour cet emplacement.
   ; RegistryLocation = "."
   ;# {ConfigDirectory} {} {Définir le dossier où placer les fichier ini des modules ?} {}
   ; Utilisé par les fichiers ini  des modules de région complémentaires. Vous pouvez définir  
   ; ce dossier en dehors de bin, ainsi ces fichiers ini resteront après une mise à jour.  
   ; Le processus OpenSim.exe doit avoir les droits en lecture et écriture pour ce dossier 
   ; ConfigDirectory = "."
   ;# {region_info_source} {} {Depuis où charger la région ?} {Système de fichier web} filesystem
   ;; Détermine où OpenSimulator cherche les fichiers qui disent au serveur
   ;; quelle région charger.
   ;; La valeur par défaut est "filesystem"
   ; region_info_source = "filesystem"
   ; region_info_source = "web"
   
   ;# {regionload_regionsdir} {region_info_source} {Localisation des fichiers ?} {} Regions
   ;; Détermine où les fichiers XML de region sont stockés si vous les chargez 
   ;; depuis le système de fichiers.
   ;; Par défaut cette valeur est bin/Regions dans votre dossier d'installation d'OpenSimulator
   ; regionload_regionsdir="C:\somewhere\xmlfiles\"
   ;# {regionload_webserver_url} {region_info_source} {URL depuis lequel charger une région ?} {}
   ;; Détermine la page depuis laquelle les fichiers xml des regions sont récupérés si vous
   ;; les chargez depuis le  web.
   ;; XML ici a le même format que sur le système de fichiers
   ;; (le tag <Root> inclus), sauf que l'ensemble est inclus dans un 
   ;; tag <Regions>.
   ; regionload_webserver_url = "http://example.com/regions.xml";
   ;# {allow_regionless} {} {Permet au simulateur de démarrer sans régions configurée.} {true false} false
   ;; Permette au simulateur de démarrer si aucune configuration de région n'est disponible
   ;; dans la source d'informations de la région sélectionnée.
   ; allow_regionless = false
   ;# {NonPhysicalPrimMin} {} {Taille minimale des primitives non physiques ?} {} 0.001
   ;; La taille minimale des primitives non-physiques.  A un effet sur le redimensionnement des 
   ;; primitives existantes.  Cette valeur peut être écrasée dans le fichier de configuration de la région (avec  
   ;; NonPhysicalPrimMin!).
   ; NonPhysicalPrimMin = 0.001
   ;# {NonPhysicalPrimMax} {} {taille maximale des primitives non-physiques ?} {} 256
   ;; La taille maximale des primitives non-physiques.  A un effet sur le redimensionnement des
   ;; primitives existantes. Cette valeur peut être écrasée dans le fichier de configuration de la région (avec
   ;; NonPhysicalPrimMax!).
   ; NonPhysicalPrimMax = 256
   ;# {PhysicalPrimMin} {} {Taille minimale des primitives physiques ?} {} 0.01
   ;; Taille minimale pour laquelle une primitive peut être physique. A un effet sur le redimensionnement des
   ;; primitives existantes.  Cette valeur peut être écrasée dans le fichier de configuration de la région.
   ; PhysicalPrimMin = 0.01
   ;# {PhysicalPrimMax} {} {Taille maximale des primitives physiques?} {} 64
   ;; Taille maximale pour laquelle une primitive peut être physique.  A un effet sur le redimensionnement des
   ;; primitives existantes.  Cette valeur peut être écrasée dans le fichier de configuration de la région.
   ; PhysicalPrimMax = 64
   ;# {ClampPrimSize} {} {Dire au viewer de redimensionner les grandes primitives aux tailles maximale ?} {true false} false
   ;; Si un viewer essaie de rezzer une primitive plus grande que la taille maximale non-physique ou
   ;; physique , donner a la primitive les dimension maximales définies.
   ;; Ce paramatre peut être écrasée dans le fichier de configuration de la région.
   ; ClampPrimSize = false
   ;# {LinksetPrims} {} {Maximum de primitives qu'un objet lié peut contenir?} {} 0
   ;; Nombre maximal de primitives permis dans un objet lié. A un effet sur la création de nouveau
   ;; objets liés. Ignoré si cette valeur est inférieure ou égale à zéro.
   ;; Cette valeur peut être écrasée dans le fichier de configuration de la région.
   ; LinksetPrims = 0
   ;# {AllowScriptCrossing} {} {Permettre aux scripts de passer dans cette région ? } {true false} true
   ;; Permet aux scripts de rester actifs quand ils traversent les limites de la région, au lieu
   ;; d'être redémarrés.  L'état est rechargé dans la région de destination.
   ;; Cela s'applique seulement quand le passage se fait entre régions de simulateurs
   ;; différents.  
   ;; Pour un passage entre les régions d'un même simulateur, le script reste
   ;; toujours actif (n'est pas redémarré).
   ; AllowScriptCrossing = true
   ;# {TrustBinaries} {AllowScriptCrossing:true} {Accepter la code de script  binaire compilé (DANGEREUX!)} {true false} false
   ;; Permet aux scripts binaires compilés de traverser les limites de la région.
   ;; Si vous définissez ce paramètre à "true", toutes les régions qui peuvent vous téléporter sur cette région peuvent
   ;; injecter un CODE BINAIRE QUELCONQUE dans votre système. À utiliser à vos risques et périls.
   ;; VOUS AVEZ ÉTÉ AVERTI!
   ; TrustBinaries = false
   ;# {CombineContiguousRegions} {} {Créer une mégarégion si possible ? (Ne pas utiliser avec du contenu existant ou des  varregions!)} {true false} false
   ;; Combine toutes les régions contingües en une  megaregion 
   ;; Ordonnez vos régions du sud au nord, d'ouest en est dans votre  regions.ini
   ;; puis, définissez ce paramètres à true
   ;; Attention !  Ne pas utiliser avec des régions qui ne sont pas vides !,
   ;; Cela risque de les casser.
   ;; De plus, ce paramètre doit être défini à false pour les varregions, car se sont des régions uniques et plus grandes et 
   ;; non des petits régions combinées.
   ; CombineContiguousRegions = false
   ;# {InworldRestartShutsDown} {} {Arrêter l'instance au redémarrage de la région ?} {true false} false
   ;; Si vous n'avez qu'une région sur une instance, ou pour éviter de nombreux bogues
   ;; que vous pourriez provoquer dans les modules en redémarrant une région, définissez ce paramètre à
   ;; true pour que l'instance entière soit arrêtée à la place de redémarrer la région.
   ;; Ceci est destiné à être utilisé sur des systèmes où un outil externe comme 
   ;; Monit, va redémarrer une instance qui s'est terminée, ainsi l'instance va s'arrêter
   ;; avant le redémarrage.
   ; InworldRestartShutsDown = false
   ;; La persistance des modifications des objets s'établit pendant des balayages réguliers. Les éléments 
   ;; suivants contrôlent ce comportement pour empêcher que les objets modifiés ne chargent fortement 
   ;; le magasin de données de région.
   ;; Si ces deux valeurs sont définies à zéro, la persistance de tous les objets modifiés 
   ;; s'établira à chaque balayage.
   ;# {MinimumTimeBeforePersistenceConsidered} {} {Temps avant qu'un objet inchangé puisse devenir persistant} {} 60
   ;; Les objets seront considérés persistants au prochain balayage s'ils n'ont 
   ;; pas été modifiés pendant ce nombre de secondes.
   ; MinimumTimeBeforePersistenceConsidered = 60
   ;# {MaximumTimeBeforePersistenceConsidered} {} {Temps avant qu'un objet modifié puisse devenir persistant ?} {} 600
   ;; Les objets seront toujours considérés persistants au prochain balayage 
   ;; si le premier changement est survenu depuis ce nombre de secondes.
   ; MaximumTimeBeforePersistenceConsidered = 600
   ;# {physical_prim} {} {Permettre aux primitives d'être physiques ?} {true false} true
   ;; Si vous voulez permettre aux primitives de devenir physiques et  avoir un comportement physique
   ;; lorsque la case à cocher du client est activée, définissez ce paramètre à true.
   ; physical_prim = true
   ;; Sélectectionnez un mesher ici.
   ;;
   ;; Meshmerizer gère correctement le primitives complexe en utilisant des maillages triangulaires.
   ;; Notez que actuellement, seul le moteur physique ODE traite le maillage des 
   ;; primitives de manière satisfaisante.


   ;# {meshing} {} {Selectionner le mesher} {Meshmerizer ZeroMesher} Meshmerizer
   ;; ZeroMesher est plus rapide, mais laisse le moteur physique modéliser le maillage en 
   ;; utilisant seulement les formes de base qu'il prend en charge.
   ;; Habituellement ce n'est qu'une boîte.
   ;; la valeur par défaut est Meshmerizer
   ; meshing = Meshmerizer
   ; meshing = ZeroMesher
   ;; Sélectionner ubODEMeshmerizer uniquement avec le moteur de physiques ubOde
   ; meshing = ubODEMeshmerizer
   ;; Choisir un de ces moteurs de physiques ci-dessous. Choose one of the physics engines below
   ;# {physics} {} {Selection d'un moteur de physiques} {OpenDynamicsEngine BulletSim basicphysics POS} BulletSim
   ;; BulletSim et le moteur de physiques par défaut. Il permet les meilleures performances et la plupart des fonctionnalités.
   ;; BulletSim supporte les varregions.
   ;; OpenDynamicsEngine était le moteur de physiques précédent pour OpenSimulator 0.7.6.1 et antérieur.  
   ;; Il continue a permettre une implémentation fonctionnelle. Il ne support pas encore les varregions.
   ;; basicphysics ne modèlise pas les objets physiques et les rend fantômes.   
   ;; Le moteur physique par défaut est BulletSim
   ; physics = OpenDynamicsEngine
   ; physics = BulletSim
   ; physics = basicphysics
   ; physics = POS
   ;; alternative le moteur OpenDynamicsEngine. ubODEMeshmerizer ci-dessus DOIT être aussi sélectionné.
   ; physics = ubODE
   ;# {DefaultScriptEngine} {} {Moteur de script par défault} {XEngine} XEngine
   ;; Le moteur de script utilisé. Actuellement, nous n'avons que XEngine
   ; DefaultScriptEngine = "XEngine"
   ;# {HttpProxy} {} {URL du proxy pour les llHTTPRequest et le chargement dynamique des textures} {} http://proxy.com:8080
   ;; Paramètre de proxy Http pour les llHTTPRequest et le chargement des textures dynamiques, 
   ;; si nécessaire
   ; HttpProxy = "http://proxy.com:8080"
   ;# {HttpProxyExceptions} {HttpProxy} {Ensemble d'expressions régulières définissant l'URL qui ne doit pas être partagée} {}
   ;; Si vous utilisez HttpProxy, alors, vous pouvez définir HttpProxyExceptions 
   ;; en déclarant une liste d'expressions régulières pour les URLs qui ne doivent pas passer par 
   ;; le proxy.
   ;; Par exemple, les serveurs dans votre pare-feu.
   ;; Séparez les modèles avec des ';'
   ; HttpProxyExceptions = ".mydomain.com;localhost"
   ;# {emailmodule} {} {Permettre les fonctionnalités llEmail et llGetNextEmail ? (requiert un serveur SMTP)} {true false} false
   ;; Le module d'email requiert quelques paramètrages. Un serveur  SMTP est nécessaire
   ;; pour envoyer des emails.
   ; emailmodule = DefaultEmailModule
   ;# {SpawnPointRouting} {} {Définir une méthode de routage pour les points d'arrivées du Telehub} {closest random sequence} closest
   ;; SpawnPointRouting organise l'arrivée des avatars entrants.
   ;; "closest" placera l'avatar sur le SpawnPoint  disponible le plus proche
   ;; de la destination (normalement clic sur la carte/landmark).
   ;; "random" placera l'avatar sur un spawnpoint sélectionné au hasard.
   ;; "sequence" placera l'avatar sur sur le SpawnPoint séquentiel suivant.
   ; SpawnPointRouting = closest
   ;# {TelehubAllowLandmark} {} {Permettre au utilisateurs qui utilisent des landmarks d'ignorer le routage du telehub} {true false} false
   ;; TelehubAllowLandmark permet aux utilisateurs avec landmarks d'ignorer le routage du telehub
   ;; et d'arriver au coordonnées de la landmark quand ce paramètre est défini à true
   ;; la valeur par défaut est false
   ; TelehubAllowLandmark = false

[AccessControl]

   ;# {AllowedClients} {} {Bar (|) separated list of allowed clients} {}
   ;; Bar (|) separated list of viewers which may gain access to the regions.
   ;; One can use a substring of the viewer name to enable only certain
   ;; versions
   ;; Example: Agent uses the viewer "Imprudence 1.3.2.0"
   ;; - "Imprudence" has access
   ;; - "Imprudence 1.3" has access
   ;; - "Imprudence 1.3.1" has no access
   ; AllowedClients = ""
   ;# {DeniedClients} {} {Bar (|) separated list of denied clients} {}
   ;; Bar (|) separated list of viewers which may not gain access to the regions.
   ;; One can use a Substring of the viewer name to disable only certain
   ;; versions
   ;; Example: Agent uses the viewer "Imprudence 1.3.2.0"
   ;; - "Imprudence" has no access
   ;; - "Imprudence 1.3" has no access
   ;; - "Imprudence 1.3.1" has access
   ;;
   ; DeniedClients = ""


[Map]

   ;# {GenerateMaptiles} {} {Generate map tiles?} {true false} true
   ;; Map tile options.  
   ;; If true, then maptiles are generated using the MapImageModule below.
   ;; If false then the texture referenced by MaptileStaticUUID is used instead, which can also be overridden
   ;; in individual region config file(s).  If you do not want to upload map tiles at all, then you will need 
   ;; both to set this to false and comment out the [Modules] MapImageServiceModule setting in config-include/
   ; GenerateMaptiles = true
   ;# {MapImageModule} {} {The map image module to use} {MapImageModule Warp3DImageModule} MapImageModule
   ;; The module to use in order to generate map images.
   ;; MapImageModule is the default.  Warp3DImageModule is an alternative experimental module that can 
   ;; generate better images.
   ;MapImageModule = "MapImageModule"
   ;# {MaptileRefresh} {GenerateMaptiles} {Maptile refresh period?} {} 0
   ;; If desired, a running region can update the map tiles periodically
   ;; to reflect building activity. This names no sense of you don't have
   ;; prims on maptiles. Value is in seconds.
   ; MaptileRefresh = 0
   ;# {MaptileStaticUUID} {} {Asset ID for static map texture} {} 00000000-0000-0000-0000-000000000000
   ;; If not generating maptiles, use this static texture asset ID
   ;; This may be overridden on a per region basis in Regions.ini
   ; MaptileStaticUUID = "00000000-0000-0000-0000-000000000000"
   ;# {TextureOnMapTile} {} {Use terrain textures for map tiles?} {true false} true
   ;; Use terrain texture for maptiles if true, use shaded green if false
   ; TextureOnMapTile = true
   ;# {DrawPrimOnMapTile} {} {Draw prim shapes on map tiles?} {true false} false
   ;; Draw objects on maptile.  This step might take a long time if you've
   ;; got a large number of objects, so you can turn it off here if you'd like.
   ; DrawPrimOnMapTile = true
   ;# {TexturePrims} {} {Texture prims on map tiles?} {true false} true
   ;; Texture the faces of the prims that are rendered on the map tiles.
   ; TexturePrims = true
   ;# {TexturePrimSize} {} {Size of prims to texture faces?} {} 48
   ;; Only texture prims that have a diagonal size greater than this number
   ; TexturePrimSize = 48
   ;# {RenderMeshes} {} {Render meshes and sculpties on map tiles?} {true false} false
   ;; Attempt to render meshes and sculpties on the map
   ; RenderMeshes = false;


[Permissions]

   ;# {permissionmodules} {} {Permission modules to use (may specify multiple modules, separated by comma} {} DefaultPermissionsModule
   ;; Permission modules to use, separated by comma.
   ;; Possible modules are DefaultPermissionsModule, PrimLimitsModule
   ; permissionmodules = DefaultPermissionsModule
   ;# {serverside_object_permissions} {permissionmodules:DefaultPermissionsModule} {Activate permission handling by the sim?} {true false} true
   ;; These are the parameters for the default permissions module
   ;;
   ;; If set to false, then, in theory, the server never carries out
   ;; permission checks (allowing anybody to copy
   ;; any item, etc.  This may not yet be implemented uniformally.
   ;; If set to true, then all permissions checks are carried out
   ; serverside_object_permissions = true
   ;# {allow_grid_gods} {} {Allow grid gods?} {true false} false
   ;; This allows users with a UserLevel of 200 or more to assume god
   ;; powers in the regions in this simulator.
   ; allow_grid_gods = false
   ;; This allows some control over permissions
   ;; please note that this still doesn't duplicate SL, and is not intended to
   ;# {region_owner_is_god} {} {Allow region owner gods} {true false} true
   ;; Allow region owners to assume god powers in their regions
   ; region_owner_is_god = true
   ;# {region_manager_is_god} {} {Allow region manager gods} {true false} false
   ;; Allow region managers to assume god powers in regions they manage
   ; region_manager_is_god = false
   ;# {parcel_owner_is_god} {} {Allow parcel owner gods} {true false} false
   ;; Allow parcel owners to assume god powers in their parcels
   ; parcel_owner_is_god = false
   ;# {simple_build_permissions} {} {Allow building in parcel by access list (no groups)} {true false} false
   ;; More control over permissions
   ;; This is definitely not SL!
   ;; Provides a simple control for land owners to give build rights to
   ;; specific avatars in publicly accessible parcels that disallow object
   ;; creation in general. 
   ;; Owners specific avatars by adding them to the Access List of the parcel
   ;; without having to use the Groups feature
   ; simple_build_permissions = false


[Estates]

   ; If these values are commented out then the user will be asked for estate details when required (this is the normal case).
   ; If these values are uncommented then they will be used to create a default estate as necessary.
   ; New regions will be automatically assigned to that default estate.
   ;# {DefaultEstateName} {} {Default name for estate?} {} My Estate
   ;; Name for the default estate
   ; DefaultEstateName = My Estate
   ;# {DefaultEstateOwnerName} {} {Default estate owner name?} {} FirstName LastName
   ;; Name for default estate owner
   ; DefaultEstateOwnerName = FirstName LastName


   ; ** Standalone Estate Settings **
   ; The following parameters will only be used on a standalone system to 
   ; create an estate owner that does not already exist
   ;# {DefaultEstateOwnerUUID} {} {Default estate owner UUID?} {} 00000000-0000-0000-0000-000000000000
   ;; If DefaultEstateOwnerUUID is left at UUID.Zero (as below) then a random 
   ;; UUID will be assigned. This is normally what you want 
   ; DefaultEstateOwnerUUID = 00000000-0000-0000-0000-000000000000
   ;# {DefaultEstateOwnerEMail} {} {Default estate owner email?} {}
   ;; Email address for the default estate owner
   ; DefaultEstateOwnerEMail = owner@domain.com
   ;# {DefaultEstateOwnerPassword} {} {Default estate owner password} {}
   ;; Password for the default estate owner
   ; DefaultEstateOwnerPassword = password


[SMTP]

   ;; The SMTP server enabled the email module to send email to external
   ;; destinations.
   ;# {enabled} {[Startup]emailmodule:DefaultEmailModule} {Enable SMTP service?} {true false} false
   ;; Enable sending email via SMTP
   ; enabled = false
   ;# {internal_object_host} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Host name to treat as internal (object to object) email?} {} lsl.opensim.local
   ; internal_object_host = lsl.opensim.local
   ;# {host_domain_header_from} {[Startup]emailmodule:DefaultEmailModule enabled:true} {From address to use in the sent email header?} {} 127.0.0.1
   ; host_domain_header_from = "127.0.0.1"
   ;# {email_pause_time} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Period in seconds to delay after an email is sent.} {} 20
   ; email_pause_time = 20
   ;# {email_max_size} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Maximum total size of email in bytes.} {} 4096
   ; email_max_size = 4096
   ;# {SMTP_SERVER_HOSTNAME} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server name?} {} 127.0.0.1
   ; SMTP_SERVER_HOSTNAME = "127.0.0.1"
   ;# {SMTP_SERVER_PORT} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server name?} {SMTP server port?} {} 25
   ; SMTP_SERVER_PORT = 25
   ;# {SMTP_SERVER_LOGIN} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server user name?} {}
   ; SMTP_SERVER_LOGIN = ""
   ;# {SMTP_SERVER_PASSWORD} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server password} {}
   ; SMTP_SERVER_PASSWORD = ""


[Network]

   ;# {ConsoleUser} {} {User name for console account} {}
   ;; Configure the remote console user here. This will not actually be used
   ;; unless you use -console=rest at startup.
   ; ConsoleUser = "Test"
   ;# {ConsolePass} {} {Password for console account} {}
   ; ConsolePass = "secret"
   ;# {console_port} {} {Port for console connections} {} 0
   ; console_port = 0
   ;# {http_listener_port} {} {TCP Port for this simulator to listen on? (This must be unique to the simulator!)} {} 9000
   ;; Simulator HTTP port. This is not the region port, but the port the
   ;; entire simulator listens on. This port uses the TCP protocol, while
   ;; the region ports use UDP.
   ; http_listener_port = 9000
   ; By default, OpenSimulator does not allow scripts to make HTTP calls to addresses on the simulator's LAN.
   ; See the OutboundDisallowForUserScripts parameter in OpenSimDefaults.ini for more information on this filter.
   ; If you need to allow scripts to make some LAN calls use the OutboundDisallowForUserScriptsExcept parameter below.
   ; We recommend that you do not override OutboundDisallowForUserScripts directly unless you are very sure about what you're doing.
   ;
   ; You can whitelist individual endpoints by IP or FQDN, e.g.
   ;
   ; OutboundDisallowForUserScriptsExcept = 192.168.1.3:8003
   ; 
   ; You can specify multiple addresses by separating them with a bar.  For example,
   ;
   ; OutboundDisallowForUserScriptsExcept = 192.168.1.3:8003|myinternalserver:8000
   ; 
   ; If an address if given without a port number then port 80 is assumed
   ;
   ; You can also specify a network range in CIDR notation to whitelist, e.g.
   ;
   ; OutboundDisallowForUserScriptsExcept = 192.168.1.0/24
   ;
   ; to whitelist all ports on addresses 192.168.1.0 to 192.168.1.255
   ; To specify an individual IP address use the /32 netmask
   ;
   ; OutboundDisallowForUserScriptsExcept = 192.168.1.2/32
   ;
   ; See http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing#CIDR_notation for more information on CIDR notation
   ;# {HttpBodyMaxLenMAX} {} {Maximum bytes allowed for HTTP_BODY_MAXLENGTH} {} 16384
   ;; By default, llHTTPRequest limits the response body to 2048 bytes.
   ;; This limit can be extended using HTTP_BODY_MAXLENGTH to a maximum
   ;; of HttpBodyMaxLenMAX bytes. 
   ;; Please be aware that the limit can be set to insanely high values,
   ;; effectively removing any limitation. This will expose your sim to a
   ;; known attack. It is not recommended to set this limit higher than
   ;; the highest value that is actually needed by existing applications!
   ;; 16384 is the SL compatible value.
   ; HttpBodyMaxLenMAX=16384
   ;# {ExternalHostNameForLSL} {} {Hostname to use for HTTP-IN URLs. This should be reachable from the internet.} {}
   ;; Hostname to use in llRequestURL/llRequestSecureURL
   ;; if not defined - default machine name is being used
   ;; (on Windows this mean NETBIOS name - useably only inside local network)
   ; ExternalHostNameForLSL = "127.0.0.1"
   ;# {shard} {} {Name to use for X-Secondlife-Shard header? (press enter if unsure)} {} OpenSim
   ;; What is reported as the "X-Secondlife-Shard"
   ;; Defaults to the user server url if not set
   ;; The old default is "OpenSim", set here for compatibility
   ;; The below is not commented for compatibility.
   shard = "OpenSim"
   ;# {user_agent} {} {User agent to report to web servers?} {} OpenSim LSL (Mozilla Compatible)
   ;; What is reported as the "User-Agent" when using llHTTPRequest
   ;; Defaults to not sent if not set here. See the notes section in the wiki
   ;; at http://wiki.secondlife.com/wiki/LlHTTPRequest for comments on adding
   ;; " (Mozilla Compatible)" to the text where there are problems with a 
   ;; web server
   ; user_agent = "OpenSim LSL (Mozilla Compatible)"
   ;; The follow 3 variables are for HTTP Basic Authentication for the Robust services.
   ;; Use this if your central services in port 8003 need to be accessible on the Internet
   ;; but you want to protect them from unauthorized access. The username and password
   ;; here need to match the ones in the Robust service configuration.
   ; AuthType = "BasicHttpAuthentication"
   ; HttpAuthUsername = "some_username"
   ; HttpAuthPassword = "some_password"
   ;;
   ;; Any of these 3 variables above can be overriden in any of the service sections.


[XMLRPC]

   ;# {XmlRpcRouterModule} {} {Module used to route incoming llRemoteData calls} {XmlRpcRouterModule XmlRpcGridRouterModule} XmlRpcRouterModule
   ;; If enabled and set to XmlRpcRouterModule, this will post an event, 
   ;; "xmlrpc_uri(string)" to the script concurrently with the first 
   ;; remote_data event. This will contain the fully qualified URI an 
   ;; external site needs to use to send XMLRPC requests to that script
   ;;
   ;; If enabled and set to XmlRpcGridRouterModule, newly created channels
   ;; will be registered with an external service via a configured uri
   ;XmlRpcRouterModule = "XmlRpcRouterModule"
   ;# {XmlRpcPort} {} {Port for incoming llRemoteData xmlrpc calls} {} 20800
   ;XmlRpcPort = 20800
   ;# {XmlRpcHubURI} {XmlRpcRouterModule} {URI for external service used to register xmlrpc channels created in the simulator. This depends on XmlRpcRouterModule being set to XmlRpcGridRouterModule} {} http://example.com
   ;; If XmlRpcRouterModule is set to XmlRpcGridRouterModule, the simulator
   ;; will use this address to register xmlrpc channels on the external
   ;; service 
   ; XmlRpcHubURI = http://example.com


[ClientStack.LindenUDP]

   ;; See OpensSimDefaults.ini for the throttle options. You can copy the
   ;; relevant sections and override them here.
   ;; DO NOT MODIFY OpenSimDefaults.ini, as your changes would be lost
   ;; with the next update!
   ;# {DisableFacelights} {} {Stop facelights from working?} {true false} false
   ;; Quash and remove any light properties from attachments not on the
   ;; hands. This allows flashlights and lanterns to function, but kills
   ;; silly vanity "Facelights" dead. Sorry, head mounted miner's lamps
   ;; will also be affected.
   ;; This is especially important in artistic builds that depend on lights
   ;; on the build for their appearance, since facelights will cause the
   ;; building's lights to possibly not be rendered.
   ; DisableFacelights = "false"


[ClientStack.LindenCaps]

   ;; For the long list of capabilities, see OpenSimDefaults.ini
   ;; Here are the few ones you may want to change. Possible values
   ;; are:
   ;;   "" -- empty, capability disabled
   ;;   "localhost" -- capability enabled and served by the simulator
   ;;   "<url>" -- capability enabled and served by some other server
   ;;
   ; These are enabled by default to localhost. Change if you see fit.
   Cap_GetTexture = "localhost"
   Cap_GetMesh = "localhost"
   Cap_AvatarPickerSearch = "localhost"
   Cap_GetDisplayNames = "localhost"


[SimulatorFeatures]

   ;# {SearchServerURI} {} {URL of the search server} {}
   ;; Optional. If given this serves the same purpose as the grid wide
   ;; [LoginServices] SearchURL setting and will override that where
   ;; supported by viewers.
   ;SearchServerURI = "http://127.0.0.1:9000/"
   ;# {DestinationGuideURI} {} {URL of the destination guide} {}
   ;; Optional. If given this serves the same purpose as the grid wide
   ;; [LoginServices] DestinationGuide setting and will override that where
   ;; supported by viewers.
   ;DestinationGuideURI = "http://127.0.0.1:9000/guide"


[Chat]

   ;# {whisper_distance} {} {Distance at which a whisper is heard, in meters?} {} 10
   ;; Distance in meters that whispers should travel.
   ; whisper_distance = 10
   ;# {say_distance} {} {Distance at which normal chat is heard, in meters?} {} 20
   ;; Distance in meters that ordinary chat should travel.
   ; say_distance = 20
   ;# {shout_distance} {} {Distance at which a shout is heard, in meters?} {} 100
   ;; Distance in meters that shouts should travel.
   ; shout_distance = 100


[EntityTransfer]

   ;# {DisableInterRegionTeleportCancellation} {} {Determine whether the cancel button is shown at all during teleports.} {false true} false
   ;; This option exists because cancelling at certain points can result in an unuseable session (frozen avatar, etc.)
   ;; Disabling cancellation can be okay in small closed grids where all teleports are highly likely to suceed.
   ;DisableInterRegionTeleportCancellation = false
   ;# {LandingPointBehavior} {} {How to honor landing points and telehubs for gods.} {LandingPointBehavior_OS LandingPointBehavior_SL} LandingPointBehavior_OS
   ;; This option exists to control the behavior of teleporting gods into places that have landing points
   ;; and telehubs. Historically, there has been a difference: OpenSim (OS) has honored landing points and telehubs even for
   ;; avatars with god permissions; SL lets gods land wherever they want.
   ;LandingPointBehavior = LandingPointBehavior_OS

[Messaging]

   ;# {OfflineMessageModule} {} {Module to use for offline message storage} {OfflineMessageModule "Offline Message Module V2" *}
   ;; Module to handle offline messaging. The core module requires an external
   ;; web service to do this. See OpenSim wiki.
   ; OfflineMessageModule = OfflineMessageModule
   ;; Or, alternatively, use this one, which works for both standalones and grids
   ; OfflineMessageModule = "Offline Message Module V2"
   ;# {OfflineMessageURL} {OfflineMessageModule:OfflineMessageModule Offline Message Module V2:Offline Message Module V2} {URL of offline messaging service} {}
   ;; URL of web service for offline message storage. Leave it commented if your service is local to the sim.
   ; OfflineMessageURL = ${Const|BaseURL}/Offline.php
   ; OfflineMessageURL = ${Const|BaseURL}:${Const|PrivatePort}
   ;# {StorageProvider} {Offline Message Module V2:Offline Message Module V2} {DLL that provides the storage interface} {OpenSim.Data.MySQL.dll}
   ;; For standalones, this is the storage dll.
   ; StorageProvider = OpenSim.Data.MySQL.dll
   ;# {MuteListModule} {OfflineMessageModule:OfflineMessageModule} {} {} MuteListModule
   ;; Mute list handler (not yet implemented). MUST BE SET to allow offline
   ;; messages to work
   ; MuteListModule = MuteListModule
   ;# {MuteListURL} {OfflineMessageModule:OfflineMessageModule} {} {} http://yourserver/Mute.php
   ;; URL of the web service that serves mute lists. Not currently used, but
   ;; must be set to allow offline messaging to work.
   ; MuteListURL = http://yourserver/Mute.php
   ;; Control whether group invites and notices are stored for offline users.
   ;; Default is true.
   ;; This applies to both core groups module.
   ; ForwardOfflineGroupMessages = true


[BulletSim]

   ;# {AvatarToAvatarCollisionsByDefault} {[Startup]physics:BulletSim} {Should avatars collide with each other?} {true false} true
   AvatarToAvatarCollisionsByDefault = true


[ODEPhysicsSettings]

   ;# {mesh_sculpted_prim} {[Startup]physics:OpenDynamicsEngine} {Mesh sculpties so they collide as they look?} {true false} true
   ;; Do we want to mesh sculpted prim to collide like they look?
   ;; If you are seeing sculpt texture decode problems 
   ;; (messages such as "Decoded image with unhandled number of components: 0 shortly followed by a physcs exception")
   ;; then you might want to try setting this to false.
   ; mesh_sculpted_prim = true
   ;# {use_NINJA_physics_joints} {[Startup]physics:OpenDynamicsEngine} {Use jointed (NINJA) physics?} {true false} false
   ;; If you would like physics joints to be enabled through a special naming
   ;; convention in the client, set this to true.
   ;; (see NINJA Physics, http://opensimulator.org/wiki/NINJA_Physics)
   ; use_NINJA_physics_joints = false

[RemoteAdmin]

   ;; This is the remote admin module, which uses XMLRPC requests to
   ;; manage regions from a web interface.
   ;# {enabled} {} {Enable the remote admin interface?} {true false} false
   ; enabled = false
   ;# {port} {enabled:true} {Port to use for the remote admin interface? (0 = default)} {} 0
   ;; Set this to a nonzero value to have remote admin use a different port
   ; port = 0
   ;# {access_password} {enabled:true} {Password for the remote admin interface} {}
   ;; This password is required to make any XMLRPC call (should be set as
   ;; the "password" parameter)
   ; access_password = ""
   ;# {access_ip_addresses} {enabled:true} {List the IP addresses allowed to call RemoteAdmin?} {}
   ;; List the IP addresses allowed to call RemoteAdmin
   ;; If access_ip_addresses isn't set, then all IP addresses can access RemoteAdmin.
   ;; access_ip_addresses = 0.0.0.0, 0.0.0.0 ...
   ; access_ip_addresses =
   ;# {create_region_enable_voice} {enabled:true} {Enable voice for newly created regions?} {true false} false
   ;; set this variable to true if you want the create_region XmlRpc
   ;; call to unconditionally enable voice on all parcels for a newly
   ;; created region
   ; create_region_enable_voice = false
   ;# {create_region_public} {enabled:true} {Make newly created regions public?} {true false} false
   ;; set this variable to false if you want the create_region XmlRpc
   ;; call to create all regions as private per default (can be
   ;; overridden in the XmlRpc call)
   ; create_region_public = false
   ;# {enabled_methods} {enabled:true} {List of methods to allow, separated by |} {} all
   ;; enable only those methods you deem to be appropriate using a | delimited
   ;; whitelist.
   ;; For example:
   ;; enabled_methods = admin_broadcast|admin_save_oar|admin_save_xml
   ;; if this parameter is not specified but enabled = true, all methods
   ;; will be available
   ; enabled_methods = all
   ;; specify the default appearance for an avatar created through the remote
   ;; admin interface
   ;; This will only take effect is the file specified by the
   ;; default_appearance setting below exists
   ; default_male = Default Male
   ; default_female = Default Female
   ;; Update appearance copies inventory items and wearables of default
   ;; avatars. if this value is false, just worn assets are copied to the
   ;; Clothes folder; if true, all Clothes and Bodyparts subfolders are copied.
   ;; The receiver will wear the same items the default avatar did wear.
   ; copy_folders = false
   ;; Path to default appearance XML file that specifies the look of the
   ;; default avatars
   ; default_appearance = default_appearance.xml


[Wind]

   ;# {enabled} {} {Enable wind module?} {true false} true
   ;; Enables the wind module.
   ; enabled = true
   ;# {wind_update_rate} {enabled:true} {Wind update rate in frames?} {} 150
   ;; How often should wind be updated, as a function of world frames.
   ;; Approximately 50 frames a second
   ; wind_update_rate = 150
   ;; The Default Wind Plugin to load
   ; wind_plugin = SimpleRandomWind
   ;; These settings are specific to the ConfigurableWind plugin
   ;; To use ConfigurableWind as the default, simply change wind_plugin
   ;; to ConfigurableWind and uncomment the following.
   ; avg_strength = 5.0
   ; avg_direction = 0.0
   ; var_strength = 5.0
   ; var_direction = 30.0
   ; rate_change = 1.0
   ;# {strength} {enabled:true wind_plugin:SimpleRandomWind} {Wind strength?} {} 1.0
   ;; This setting is specific to the SimpleRandomWind plugin
   ;; Adjusts wind strength. 0.0 = no wind, 1.0 = normal wind.
   ; strength = 1.0


[LightShare]

   ;# {enable_windlight} {} {Enable LightShare technology?} {true false} false
   ;; This enables the transmission of Windlight scenes to supporting clients,
   ;; such as the Meta7 viewer.
   ;; It has no ill effect on viewers which do not support server-side
   ;; windlight settings.
   ; enable_windlight = false


[Materials]

   ;# {enable_materials} {} {Enable Materials support?} {true false} true
   ;; This enables the use of Materials.
   ; enable_materials = true
   ; MaxMaterialsPerTransaction = 50

[DataSnapshot]

   ;# {index_sims} {} {Enable data snapshotting (search)?} {true false} false
   ;; The following set of configs pertains to search.
   ;; Set index_sims to true to enable search engines to index your
   ;; searchable data.
   ;; If false, no data will be exposed, DataSnapshot module will be off,
   ;; and you can ignore the rest of these search-related configs.
   ; index_sims = false
   ;# {data_exposure} {index_sims:true} {How much data should be exposed?} {minimum all} minimum
   ;; The variable data_exposure controls what the regions expose:
   ;;    minimum: exposes only things explicitly marked for search
   ;;    all: exposes everything
   ; data_exposure = minimum
   ;# {gridname} {index_sims:true} {Enter the name fo your grid} {} OSGrid
   ;; If search is on, change this to your grid name; will be ignored for
   ;; standalones
   ; gridname = "OSGrid"
   ;# {default_snapshot_period} {index_sims:true} {Period between data snapshots?} {} 1200
   ;; Period between data snapshots, in seconds. 20 minutes, for starters,
   ;; so that you see the initial changes fast.
   ;; Later, you may want to increase this to 3600 (1 hour) or more
   ; default_snapshot_period = 1200
   ;; This will be created in bin, if it doesn't exist already. It will hold
   ;; the data snapshots.
   ; snapshot_cache_directory = "DataSnapshot"
   ;; [Supported, but obsolete]
   ;# {data_services} {index_sims:true} {Data service URLs to register with?} {} http://metaverseink.com/cgi-bin/register.py
   ; This semicolon-separated string serves to notify specific data services
   ; about the existence of this sim. Uncomment if you want to index your
   ; data with this and/or other search providers.
   ; data_services="http://metaverseink.com/cgi-bin/register.py"
   ;; New way of specifying data services, one per service
   ;DATA_SRV_MISearch = "http://metaverseink.com/cgi-bin/register.py"

[Economy]

   ;# {SellEnabled} {} {Enable selling for 0?} {true false} true
   ; The default economy module only implements just enough to allow free actions (transfer of objects, etc).
   ; There is no intention to implement anything further in core OpenSimulator.
   ; This functionality has to be provided by third party modules.
   ;; Enables selling things for $0.  Default is true.
   ; SellEnabled = true
   ;# {PriceUpload} {} {Price for uploading?} {} 0
   ;; Money Unit fee to upload textures, animations etc.  Default is 0.
   ; PriceUpload = 0
   ;# {PriceGroupCreate} {} {Fee for group creation} {} 0
   ;; Money Unit fee to create groups.  Default is 0.
   ; PriceGroupCreate = 0


[XEngine]

   ;# {Enabled} {} {Enable the XEngine scripting engine?} {true false} true
   ;; Enable this engine in this OpenSim instance
   ; Enabled = true
   ;; How many threads to keep alive even if nothing is happening
   ; MinThreads = 2
   ;; How many threads to start at maximum load
   ; MaxThreads = 100
   ;; Time a thread must be idle (in seconds) before it dies
   ; IdleTimeout = 60
   ;; llSetTimerEvent minimum value. Default 0.5s, 0.05s whould be more resonable
   ; MinTimerInterval = 0.5
   ;# {Priority} {Enabled:true} {Priority for script engine threads?} {Lowest BelowNormal Normal AboveNormal Highest} BelowNormal
   ;; Thread priority ("Lowest", "BelowNormal", "Normal", "AboveNormal",
   ;; "Highest")
   ; Priority = "BelowNormal"
   ;; Maximum number of events to queue for a script (excluding timers)
   ; MaxScriptEventQueue = 300
   ;; Stack size per script engine thread in bytes.
   ;; If you are experiencing StackOverflowExceptions you may want to increase this (e.g. double it).
   ;; The trade-off may be increased memory usage by the script engine.
   ; ThreadStackSize = 262144
   ;; Set this to true (the default) to load each script into a separate
   ;; AppDomain. 
   ;;
   ;; Setting this to false will load all script assemblies into the
   ;; current AppDomain, which will significantly improve script loading times.
   ;; It will also reduce initial per-script memory overhead.
   ;;
   ;; However, setting this to false will also prevent script DLLs from being unloaded from memory if the script is deleted.
   ;; This may cause an OutOfMemory problem over time when avatars with scripted attachments move in and out of the region.
   ;; Some Windows users have also reported script loading problems when AppDomainLoading = false
   ; AppDomainLoading = true
   ;; Controls whether scripts are stopped by aborting their threads externally (abort) or by co-operative checks from the compiled script (co-op) 
   ;; co-op will be more stable but this option is currently experimental.
   ;; If moving from co-op to abort, existing script DLLs will need to be recompiled.
   ;; This currently can only be done manually, either by setting DeleteScriptsOnStartup = true for one run  
   ;; or by deleting the script DLL* files in bin/ScriptEngines/<region-id>/
   ;; One can move from co-op back to abort without recompilation, but reverting back to co-op again will need script recompile
   ;; Current valid values are "abort" and "co-op"
   ; ScriptStopStrategy = co-op
   
   ;# {DeleteScriptsOnStartup} {} {Delete previously compiled script DLLs on startup?} {true false} true
   ;; Controls whether previously compiled scripts DLLs are deleted on sim restart. If you set this to false
   ;; then startup will be considerably faster since scripts won't need to be recompiled. However, then it becomes your responsibility to delete the
   ;; compiled scripts if you're recompiling OpenSim from source code and internal interfaces used
   ;; by scripts have changed.
   ; DeleteScriptsOnStartup = true
   ;# {DefaultCompileLanguage} {Enabled:true} {Default script language?} {lsl vb cs} lsl
   ;; Default language for scripts
   ; DefaultCompileLanguage = "lsl"
   ;# {AllowedCompilers} {Enabled:true} {Languages to allow (comma separated)?} {} lsl
   ;; List of allowed languages (lsl,vb,cs)
   ;; AllowedCompilers=lsl,cs,vb
   ;; *warning*, non lsl languages have access to static methods such as
   ;; System.IO.File.  Enable at your own risk.
   ; AllowedCompilers = "lsl"
   ;; Compile debug info (line numbers) into the script assemblies
   ; CompileWithDebugInformation = true
   ; ==== Settings for MOD and OSSL functions have been moved to the [OSSL] section
   ;# {EventLimit} {} {Amount of time a script can spend in an event handler} {} 30
   ;; Time a script can spend in an event handler before it is interrupted
   ; EventLimit = 30
   ;# {KillTimedOutScripts} {} {Kill script in case of event time overruns?} {true false} false
   ;; If a script overruns it's event limit, kill the script?
   ; KillTimedOutScripts = false
   ;# {ScriptDelayFactor} {} {Multiplier for scripting delays} {} 1.0
   ;; Sets the multiplier for the scripting delays
   ; ScriptDelayFactor = 1.0
   ;# {ScriptDistanceLimitFactor} {} {Multiplier for 10.0m distance limits?} {}
   ;; The factor the 10 m distances limits are multiplied by
   ; ScriptDistanceLimitFactor = 1.0
   ;# {NotecardLineReadCharsMax} {} {Maximum length of notecard line?} {} 255
   ;; Maximum length of notecard line read
   ;; Increasing this to large values potentially opens
   ;; up the system to malicious scripters
   ; NotecardLineReadCharsMax = 255
   ;# {SensorMaxRange} {} {Sensor range} {} 96.0
   ;; Sensor settings
   ; SensorMaxRange = 96.0
   ;# {SensorMaxResults} {} {Max sensor results returned?} {}
   ; SensorMaxResults = 16
   ;# {DisableUndergroundMovement} {} {Disable underground movement of prims} {true false} true
   ;; Disable underground movement of prims (default true); set to
   ;; false to allow script controlled underground positioning of
   ;; prims
   ; DisableUndergroundMovement = true
   ;# {ScriptEnginesPath} {} {Path to script assemblies} {} ScriptEngines
   ;; Path to script engine assemblies
   ;; Default is ./bin/ScriptEngines
   ; ScriptEnginesPath = "ScriptEngines"

[OSSL]

   ;# {Include-osslEnable} {} {Include file for enabling and permissions for OSSL functions} {}
   ;; Optionally include file to enable OSSL functions and set permissions on who can use which.
   ;; If this INI file is not included, the OSSL functions are disabled.
   Include-osslEnable = "config-include/osslEnable.ini"


[MRM]

   ;; Enables the Mini Region Modules Script Engine.
   ; Enabled = false
   ;; Runs MRM in a Security Sandbox
   ;; WARNING: DISABLING IS A SECURITY RISK.
   ; Sandboxed = true
   ;; The level sandbox to use, adjust at your OWN RISK.
   ;; Valid values are:
   ;; *  FullTrust
   ;; *  SkipVerification
   ;; *  Execution
   ;; *  Nothing
   ;; *  LocalIntranet
   ;; *  Internet
   ;; *  Everything
   ; SandboxLevel = "Internet"
   ;; Only allow Region Owners to run MRMs
   ;; May represent a security risk if you disable this.
   ; OwnerOnly = true


[FreeSwitchVoice]

   ;; In order for this to work you need a functioning FreeSWITCH PBX set up.
   ;; Configuration details at http://opensimulator.org/wiki/Freeswitch_Module
   ; Enabled = false
   ;; You need to load a local service for a standalone, and a remote service
   ;; for a grid region. Use one of the lines below, as appropriate
   ;; If you're using Freeswitch on a standalone then you will also need to configure the [FreeswitchService] section in config-include/StandaloneCommon.ini
   ; LocalServiceModule = OpenSim.Services.FreeswitchService.dll:FreeswitchService
   ; LocalServiceModule = OpenSim.Services.Connectors.dll:RemoteFreeswitchConnector
   ;; If using a remote connector, specify the server URL
   ; FreeswitchServiceURL = http://my.grid.server:8004/fsapi


[Groups]

   ;# {Enabled} {} {Enable groups?} {true false} false
   ;; Enables the groups module
   ; Enabled = false
   ;# {LevelGroupCreate} {Enabled:true} {User level for creating groups} {} 0
   ;; Minimum user level required to create groups
   ; LevelGroupCreate = 0
   ;# {Module} {Enabled:true} {Groups module to use? (Use GroupsModule to use Flotsam/Simian)} {Default "Groups Module V2"} Default
   ;; The default module can use a PHP XmlRpc server from the Flotsam project at
   ;; http://code.google.com/p/flotsam/
   ;; or from the SimianGrid project at http://code.google.com/p/openmetaverse
   ; Module = Default
   ;; or... use Groups Module V2, which works for standalones and robust grids
   ; Module = "Groups Module V2"
   ;# {StorageProvider} {Module:Groups Module V2} {The DLL that provides the storage for V2} {OpenSim.Data.MySQL.dll} 
   ; StorageProvider = OpenSim.Data.MySQL.dll
   ;# {ServicesConnectorModule} {Module:GroupsModule Module:Groups Module V2} {Service connector to use for groups} {XmlRpcGroupsServicesConnector SimianGroupsServicesConnector "Groups Local Service Connector" "Groups Remote Service Connector" "Groups HG Service Connector"} XmlRpcGroupsServicesConnector
   ;; Service connectors to the Groups Service as used in the GroupsModule.  Select one as follows:
   ;; -- for Flotsam Groups use XmlRpcGroupsServicesConnector
   ;; -- for Simian Groups use SimianGroupsServicesConnector
   ;; -- for V2 Groups, standalone, non-HG use "Groups Local Service Connector"
   ;; -- for V2 Groups, grided sim, non-HG use "Groups Remote Service Connector"
   ;; -- for V2 Groups, HG, both standalone and grided sim, use "Groups HG Service Connector"
   ;; Note that the quotes "" around the words are important!
   ; ServicesConnectorModule = XmlRpcGroupsServicesConnector
   ;# {LocalService} {ServicesConnectorModule:Groups HG Service Connector} {Is the group service in this process or elsewhere?} {local remote} local
   ;; Used for V2 in HG only. If standalone, set this to local; if grided sim, set this to remote
   ; LocalService = local
   ;# {SecretKey} {ServicesConnectorModule:Groups Remote Service Connector} {Secret key between sim and remote group service} {} ""
   ;; Used for V2 in Remote only. 
   ; SecretKey = ""
   ;# {GroupsServerURI} {Module:GroupsModule (ServicesConnectorModule:Groups Remote Service Connector or (ServicesConnectorModule:Groups HG Service Connector and LocalService:remote))} {Groups Server URI} {}
   ;; URI for the groups services of this grid
   ;; e.g. http://yourxmlrpcserver.com/xmlrpc.php for Flotsam XmlRpc
   ;; or http://mygridserver.com:82/Grid/ for SimianGrid
   ;; or ${Const|BaseURL}:${Const|PrivatePort} for robust, V2
   ;; Leave it commented for standalones, V2
   ; GroupsServerURI = ""
   ;# {HomeURI} {ServicesConnectorModule:Groups HG Service Connector} {What's the home address of this world?} {} 
   ;; Used for V2 in HG only. For example
   ;; http://mygridserver.com:9000 or http://mygridserver.com:8002
   ;; If you have this set under [Startup], no need to set it here, leave it commented
   ; HomeURI = "" 
   ;# {MessagingEnabled} {Module:GroupsModule Module:Groups Module V2} {Is groups messaging enabled?} {true false} true
   ; MessagingEnabled = true
   ;# {MessagingModule} {MessagingEnabled:true} {Module to use for groups messaging} {GroupsMessagingModule "Groups Messaging Module V2"} GroupsMessagingModule
   ; MessagingModule = GroupsMessagingModule
   ; or use "Groups Messaging Module V2" for Groups V2
   ; MessagingModule = "Groups Messaging Module V2"
   ;# {NoticesEnabled} {Module:GroupsModule Module:Groups Module V2} {Enable group notices?} {true false} true
   ;; Enable Group Notices
   ; NoticesEnabled = true
   ;# {MessageOnlineUsersOnly} {Module:GroupsModule Module} {Message online users only?} {true false} false
   ; Experimental option to only message online users rather than all users
   ; Should make large groups with few online members messaging faster, as the expense of more calls to presence service
   ; Applies Flotsam Group only. V2 has this always on, no other option
   ; MessageOnlineUsersOnly = false
   ;; This makes the Group module very chatty on the console.
   ; DebugEnabled = false
   ; This makes the Group Messaging module very chatty on the console.
   ; DebugMessagingEnabled = false
   ;; XmlRpc Security settings.  These must match those set on your backend
   ;; groups service if the service is using these keys
   ; XmlRpcServiceReadKey    = 1234
   ; XmlRpcServiceWriteKey   = 1234


[InterestManagement]

    ;# {UpdatePrioritizationScheme} {} {Update prioritization scheme?} {BestAvatarResponsiveness Time Distance SimpleAngularDistance FrontBack} BestAvatarResponsiveness
    ;; This section controls how state updates are prioritized for each client
    ;; Valid values are BestAvatarResponsiveness, Time, Distance,
    ;; SimpleAngularDistance, FrontBack
    ; UpdatePrioritizationScheme = BestAvatarResponsiveness
    ; TEST OPTION KEEP AS FALSE
    ; if true, don't send object updates if outside view range
    ; ObjectsCullingByDistance = false	 

[MediaOnAPrim]

   ;# {Enabled} {} {Enable Media-on-a-Prim (MOAP)} {true false} true
   ;; Enable media on a prim facilities
   ; Enabled = true;


[NPC]

   ;# {Enabled} {} {Enable Non Player Character (NPC) facilities} {true false} false
   ; Enabled = false
   ;; several options to control NPCs creation
   ;; allow NPCs to be created not Owned {true false} default: true
   ; AllowNotOwned = false
   ;; allow NPCs to set to be sensed as Avatars {true false} default: true
   ; AllowSenseAsAvatar = false
   ;; allow NPCs to created cloning any avatar in region {true false} default: true
   ; AllowCloneOtherAvatars = false
   ;; if true NPCs will have no group title, if false display "- NPC -" for easy identification {true false} default: true
   ; NoNPCGroup = false 


[Terrain]

   ;# {InitialTerrain} {} {Initial terrain type} {pinhead-island flat} pinhead-island
   ; InitialTerrain = "pinhead-island"

[LandManagement]

   ;; set this to false to not display parcel ban lines
   ;ShowParcelBansLines = true

[UserProfiles]

 ;# {ProfileServiceURL} {} {Set url to UserProfilesService} {}
 ;; Set the value of the url to your UserProfilesService
 ;; If un-set / "" the module is disabled
 ;; ProfileServiceURL = ${Const|BaseURL}:${Const|PublicPort}

[XBakes]

 ;# {URL} {} {Set URL for Baked texture service} {}
 ;; Sets the URL for the baked texture ROBUST service.
 ;; Disabled when unset.
 ;; URL = ${Const|BaseURL}:${Const|PrivatePort}
;;
;; Optional module to highlight God names in the viewer.
;; Uncomment and customize appropriately if you want this behavior.
;;

;[GodNames]

 ;	Enabled = false
 ;	FullNames = "Test User, Foo Bar"
 ;	Surnames = "Kryztlsk"

[Architecture]

   ;# {Include-Architecture} {} {Choose one of the following architectures} {config-include/Standalone.ini config-include/StandaloneHypergrid.ini config-include/Grid.ini config-include/GridHypergrid.ini config-include/SimianGrid.ini config-include/HyperSimianGrid.ini} config-include/Standalone.ini
   ;; Uncomment one of the following includes as required.  For instance, to create a standalone OpenSim,
   ;; uncomment Include-Architecture = "config-include/Standalone.ini"
   ;; 
   ;; Then you will need to copy and edit the corresponding *Common.example file in config-include/
   ;; that the referenced .ini file goes on to include.
   ;;
   ;; For instance, if you chose "config-include/Standalone.ini" then you will need to copy 
   ;; "config-include/StandaloneCommon.ini.example" to "config-include/StandaloneCommon.ini" before
   ;; editing it to set the database and backend services that OpenSim will use.
   ;;
   ; Include-Architecture = "config-include/Standalone.ini"
   ; Include-Architecture = "config-include/StandaloneHypergrid.ini"
   ; Include-Architecture = "config-include/Grid.ini"
   ; Include-Architecture = "config-include/GridHypergrid.ini"
   ; Include-Architecture = "config-include/SimianGrid.ini"
   ; Include-Architecture = "config-include/HyperSimianGrid.ini"
Personal tools
General
About This Wiki