OpenSimulator - User contributions [en]

User:Magnuz

2009-01-02T15:56:58Z

Magnuz:

Swedish male, born 1964 in Stockholm and living there since. I am a M.Sc. in chemical engineering and Ph.D. in medicine.

I have been working extensively with computers since 1977, with the web since 1994 and professional IT development since August 2008.

2007-05-13: Entered Second Life.

2008-12-11: Started trying out OpenSim on an iMac (PPC) G5 with OS 10.4.11.

2008-12-14: Got first a standalone and then a local grid version of OpenSim 0.5.0 running on iMac.

2008-12-15: Started trying to get OpenDynamicsEngine working on iMac.

2008-12-16: Managed to build and install OpenDynamicsEngine on iMac, but the avatar drifts downward and collisions with ground or objects aren't stopped.

2008-12-30: Installed VirtualBox 2.1.0 with Ubuntu Server 8.10 on a MacBook 2 GHz Intel Core 2 Duo with OS 10.4.11.

2009-01-02: Got first a standalone and then a local grid version of OpenSim 0.6.1.7910 running on MacBook.

User:Magnuz

2009-01-02T15:44:15Z

Magnuz:

Swedish male, born 1964 in Stockholm and living there since. I am a M.Sc. in chemical engineering and Ph.D. in medicine.

I have been working extensively with computers since 1977, with the web since 1994 and professional IT development since August 2008.

2007-05-13: Entered Second Life.

2008-12-11: Started trying out OpenSim on an iMac G5 with OS 10.4.11.

2008-12-14: Got first a standalone and then a local grid version running on iMac.

2008-12-15: Started trying to get OpenDynamicsEngine working on iMac.

2008-12-16: Managed to build and install OpenDynamicsEngine on iMac, but the avatar drifts downward and collisions with ground or objects aren't stopped.

2008-12-30: Installed VirtualBox 2.1.0 with Ubuntu Server 8.10 on a MacBook 2 GHz Intel Core 2 Duo with OS 10.4.11.

2009-01-02: Got first a standalone and then a local grid version of OpenSim 0.6.1.7910 running on MacBook.

User:Magnuz

2008-12-16T23:57:28Z

Magnuz:

Swedish male, born 1964 in Stockholm and living there since. I am a M.Sc. in chemical engineering and Ph.D. in medicine.

I have been working extensively with computers since 1977, with the web since 1994 and professional IT development since August 2008.

Entered Second Life 13 May 2007.

Started trying out OpenSim on an iMac G5 with OS 10.4.11 11 December 2008.

Got first a standalone and then a local grid version running 14 December 2008.

Started trying to get OpenDynamicsEngine working 15 December 2008.

Managed to build and install OpenDynamicsEngine 16 December 2008, but the avatar drifts downward and collisions with ground or objects aren't stopped.

User:Magnuz

2008-12-16T23:55:13Z

Magnuz:

Swedish male, born 1964 in Stockholm and living there since. I am a M.Sc. in chemical engineering and Ph.D. in medicine.

I have been working extensively with computers since 1977, with the web since 1994 and professional IT development since August 2008.

Entered Second Life 13 May 2007.

Started trying out OpenSim 11 December 2008.

Got first a standalone and then a local grid version running on an iMac G5 with OS 10.4.11 14 December 2008.

Started trying to get OpenDynamicEngine working 15 December 2008.

Managed to build and install OpenDynamicEngine 16 December 2008, but the avatar drifts downward and collisions with ground or objects aren't stopped.

User:Magnuz

2008-12-15T22:17:08Z

Magnuz:

Build Instructions

2008-12-15T09:53:01Z

Magnuz: /* Mac OS X 10.5/10.4 */

[[Category:Users]]
This page covers building OpenSim from source code on multiple platforms. Please help us keep this page up to date as the project progresses.

==Download from SVN==
Check out the [[Download]] Section

==MS Windows==

OpenSim requires either the .Net framework version 2.0, or the latest Mono. It supports the following compilers:
* [http://msdn2.microsoft.com/en-us/express/aa700756.aspx Microsoft Visual C# Express Edition] (note: not Visual C++)
* [http://www.mono-project.com/ mono]

Note for people who just downloaded the sources from http://dist.opensimulator.org/ (the "Downloads" link on the left) be advised that some important things are missing (like MySQL template scripts). For such features, you must download using svn!

Additional note: any Microsoft C# Express edition should work (2005 or 2008)

=== Building ===

* In the top-level directory, run the '<tt>runprebuild.bat</tt>' file. This will create a VS2005 solution file, a nant build file and a '<tt>compile.bat</tt>' file.
* If you prefer VS2008, run the '<tt>runprebuild2008.bat</tt>' instead.

* Open the resulting sln file with visual studio and build it there, or
* Run the '<tt>compile.bat</tt>' file. This will build the executable using MSBuild.
* if you prefer to use nant, run nant in the same top-level directory. This will build the executables.

If you don't care about physics (walking on prims, etc), ignore the rest of this section.

=== Running ===

Recent versions of OpenSim come without an <tt>OpenSim.ini</tt> file. Copy the <tt>OpenSim.ini.example</tt> file to <tt>OpenSim.ini</tt> before making any changes.

Double-click on the <tt>OpenSim.exe</tt> executable file in the <tt>bin</tt> directory. This will start up OpenSim in standalone mode.

The debugger in VS2005 C# may be used to step through the code. For those that use a Cygwin shell, you may find that one or more dll's have permissions that cause problems running. Most find that a "<tt>chmod 777 *</tt>" from the <tt>bin</tt> directory solves this.

Physics can be invoked by adding the appropriate line to the [Startup] section of <tt>OpenSim.ini</tt>. For ODE, that would be:

physics = OpenDynamicsEngine

You can also add a command line option to a shortcut, or run from a command prompt with:

-physics=OpenDynamicsEngine

'''''Windows Vista'''''

To run on Windows Vista, you must first disable Windows Firewall. Under the new "Start" button of Vista, select "Control panel". Then double-click "Windows Firewall". In the window that pops up, on the left column, select "Turn Windows Firewall on or off". You will have to give permission for this to run, then select the option "Off (not recommended)". Click "OK" and exit from the Windows Firewall window.

If you have McAfee SecurityCenter, see the description below.

Once all the security features are disabled, right click on <tt>OpenSim.exe</tt> and select "Run as administrator". This will pop up a window asking permission, select "Allow". Your OpenSim server should run in a DOS-like window and accept connections.

'''''McAfee Security'''''

McAfee Security does not allow applications to listen on ports not explicitly specified. You have two options: 1) disable firewall protection all together, 2) enable <tt>OpenSim.exe</tt> to be able to open ports.

''Disable firewall''

Open McAfee SecurityCenter. Select "Internet & Network". In the lower left corner is a small link to "Configure...". Select this. In the right side of the window, select the bar that says "Firewall protection is enabled". Here you can select "Off".

''Enable <tt>OpenSim.exe</tt> to open ports''

Open McAfee SecurityCenter. Select "Internet & Network". In the lower left corner is a small link to "Configure...". Select this. In the right side of the window, select the bar that says "Firewall protection is enabled". Select the "Advanced..." button. This will pop up a new window.

In the new window, on the left side, select "Program Permissions." In the middle on the right side of the window, select the "Add Allowed Program" button. Use the browser that pops up to find the OpenSim executable and select it.

Finally, select "OK" and exit the McAfee SecurityCenter window.

==Linux/Mac OS X/FreeBSD==

The easiest plaform to get running on the Linux side is Ubuntu 8.10, 32bit. This is what most of the developers running Linux use. If you are looking for the quick path, start there.

=== Ubuntu 8.04 / 8.10 ===

For Ubuntu users on older distributions (7.10, 8.04, etc.) '''you need''' to upgrade your mono to 1.9.1.

You can use the built in packages for mono. However, for better performance, you may want to [http://xyzzyxyzzy.net/2008/05/08/updated-mono-build-script-for-hardy-heron-and-mono-191/ upgrade mono to 1.9.1] ([http://tempvariable.blogspot.com/2008/04/installing-mono-191-on-ubuntu-804-hardy.html Other simple method])

sudo apt-get install subversion nant mono-gmcs libmono-microsoft8.0-cil \
libmono-system-runtime2.0-cil libgdiplus libmono-i18n2.0-cil libmono-oracle2.0-cil ruby
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

To upgrade the Mono version to the latest stable build Mono 2.0.1, read this page [[Build Instructions/Ubuntu-Mono-2.0.1 | Ubuntu on Mono 2.0.1]]

=== openSUSE 10.3 and 11 ===

Install an openSUSE 11 or 10.3 with its default options, add the online repositories
when finished installing do an online update with all the latest packages.

In yast install these packages, for running Opensim in standalone mode.
(there is a slight diffrence between 10.3 and 11 but following should be same)
subversion
nant
mono-jscript
- check that mono-core is installed

If you just want to use SQLite then jump to last section
within this post.

* Optional mysql - for Opensim running in Grid mode:
Install these mysql packages via yast
mysql
mysql-client
mysql-administrator
mysql-gui-tools
mysql-query-browser

Before building create the mysql database.
/etc/init.d/mysql start
mysql -u root -p -h localhost
(when asked for password just hit enter)

mysql> create database opensim;
mysql> quit

set the configuration in bin/mysql_connection.ini
Or on later builds set the connection string inside bin/OpenSim.ini

Build after installation of above in bash terminal. i save it in /opt

su -
cd /opt
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

After this you should be able to continue on starting the diffrent Servers, look in the mysql-config section,or
just run your OpenSim as a Standalone. By - eagleFX

=== Mac OS X 10.5/10.4 ===
* OpenSim is now working on PowerPC Macs! Thanks to DrScofield and those who helped him. Current nightly builds for PowerPC are not working, not sure about Intel so use the 0.5 Build. OpenSim works on Intel Macs. I'm testing on PowerBook G4. Tested these step on 10.5, but not 10.4 but should work --[[User:Mokele|Mokele]] 22:36, 14 February 2008 (PST) (Works on iMac G5 with OS 10.4.11, including expanding to local grid mode. --[[User:Magnuz|Magnuz]] 2008-12-15 10:50 (CET))
* Install XCode Developers Tools from DVD/CD Installation Disk or download from http://developer.apple.com/. You have to create an Apple account to access the downloads if you don't have an Apple account.
* Install X11 for 10.4 from the Optional Install from the DVD/CD Installation Disk. X11 for 10.5 is installed by default.
* Install Mono 1.2.5 from http://ftp.novell.com/pub/mono/archive/1.2.5/macos-10-universal/5/MonoFramework-1.2.5_5.macos10.novell.universal.dmg (The more recent releases Mono 1.2.6, 1.9.1 and 2.0.1 do not appear to work with these installation instructions. --[[User:Magnuz|Magnuz]] 2008-12-14 15:56 (CET)) and in Terminal or X11 edit the .profile file and add the following line:
export PKG_CONFIG_PATH="/Library/Frameworks/Mono.framework/Versions/Current/lib/pkgconfig/:${PKG_CONFIG_PATH}"
* Compile OpenSim
svn co http://opensimulator.org/svn/opensim/tags/0.5.0-release opensim
cd opensim
./runprebuild.sh
nant

* Download and Compile libopenjpeg-libsl-2.1.2.0.dylib and libsecondlife.dll
* libopenjpeg-libsl-2.1.2.0.dylib:
svn co http://opensimulator.org/svn/opensim-libs/old/libsl1550 opensim-libs
cd opensim-libs/openjpeg-libsl
make -f Makefile.osx
cp libopenjpeg-libsl-2.1.2.0.dylib ../../bin
* Note: The Makefile that creates the libopenjpeg-libsl-2.1.2.0.so does not compile on PowerPC, but works properly on Intel Macs. Looks like a gcc issue with compile options. (It appears to work on iMac G5 with OS X 10.4.11. --[[User:Magnuz|Magnuz]] 2008-12-14 15:55 (CET))

* libsecondlife.dll: (for PowerPC Only, see details on this step [http://xyzzyxyzzy.net/2008/02/12/installing-opensim-on-powerpcor-of-eggs-and-virtual-worlds installing OpenSim on PowerPC…or: of eggs and virtual worlds])
cd .. (back into opensim-libs)
nant
cp bin/libsecondlife.dll ../bin

* Edit the libsecondlife.dll.config (PowerPC Only). Remove the cpu="x86" tag in the last dllmap line.

=== FreeBSD 6.2 ===
su
cd /usr/ports/devel/subversion/ && make install clean (you may also need to rebuild apr-svn if this step fails)
cd /usr/ports/lang/mono/ && make install clean
cd /usr/ports/devel/nant/ && make install clean
cd /usr/ports/databases/sqlite3/ && make install clean
cd /usr/ports/x11-toolkits/libgdiplus/ && make install clean
cd /opensim/installation/directory/
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

Note: [http://opensimulator.org/wiki/OpenSim:FAQ#System.DllNotFoundException:_..2Flibopenjpeg-libsl-2.1.2.0.so|Follow the instructions on the FAQ to fix the]
"System.DllNotFoundException: ./libopenjpeg-libsl-2.1.2.0.so" issue, but use "gmake" instead of "make"

For ODE Physics you must do the following:
cd /usr/ports/graphics/libGL/ && make install clean
cd /usr/ports/graphics/libGLU/ && make install clean
cd /opensim/installation/directory/
svn co http://opensimulator.org/svn/opensim-libs/trunk opensim-libs
cd opensim-libs/unmanaged/OpenDynamicsEngine2/
sh autogen.sh
./configure --enable-shared --enable-release --disable-demos
make
mv ./ode/src/.libs/libode.so /opensim/installation/directory/opensim/bin/

=== RedHat Enterprise Linux 4 ===
sudo vi /etc/yum.repos.d/mono.repo

[mono]
name=Mono for rhel-4-i386 (stable)
baseurl=http://ftp.novell.com/pub/mono/download-stable/rhel-4-i386/
enabled=1
gpgcheck=0

sudo yum install mono-complete monodoc-core nant
svn co svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

=== RedHat Enterprise Linux 5 ===

The instructions below also work on other RedHat Linux flavors such as CentOS or maybe Fedora.

1. Put the [http://download.opensuse.org/repositories/Mono/RHEL_5/Mono.repo Mono.repo] file in the /etc/yum.repo.d/ directory:
$ sudo su -
$ cd /etc/yum.repos.d/
$ wget http://download.opensuse.org/repositories/Mono/RHEL_5/Mono.repo
Naturally use the most [http://download.opensuse.org/repositories/Mono up-to-date link for your distribution].

2. Install Mono and related tools with yum:
$ yum install mono nant mono-jscript mono-nunit
Make sure to use nunit-console2 to run your tests.

=== Fedora 5 ===
* I needed to build latest mono and nant from sources to build OpenSim successfully, the ones available in yum repository didn't work so I had to uninstall and build and configure the packages.

For detailed instructions go [http://ruakuu.blogspot.com/2008/06/installing-and-configuring-opensim-on.html here]

=== Debian 4 ===

The following packages and their dependencies are required to run OpenSim on a default Debian 4 netinstall:
* mono
* libmono-corlib2.0-cil
* libmono-sqlite2.0-cil
* libmono-system-web2.0-cil
* libmono-microsoft8.0-cil
* libmono-system-runtime2.0-cil
* libmono-oracle2.0-cil (new dependency since r7587)

Hint: Currently (Nov/28/2008) it is possible to use Debian etch, but you will need to add custom repositories for mono to work. However installing or upgrading to Lenny/Sid will enable you to use the standard debian repositories.

=== 64bit ===
Please note that only 32bit binaries are provided in the bin/ directory of subversion. If you want to use 64bit, you'll need to rebuild these shared objects. See [[Installing and running on x86-64]]

=== Physics (Open Dynamics Engine ODE) ===
As installed from svn, ODE will work on most 32 bit platforms. If you get an ODE-related crash, and/or a libode.so not found type of error, you will need to build libode from source.

Remove <tt>libode.so</tt> from the <tt>./bin</tt> folder. (Note that subsequent svn updates may replace it again; best fix is to copy your built <tt>libode.so</tt> to <tt>bin</tt>). Do NOT remove <tt>ode.net.dll</tt>! Download the latest source from:

svn co http://opensimulator.org/svn/opensim-libs/trunk/unmanaged/OpenDynamicsEngine

OpenSim requires a couple of patches on top of ODE which are not yet included upstream. When compiling, make sure to use the following configure options:

--with-trimesh=gimpact
--enable-shared

Make sure the configure script confirms these choices, and always compile with single precision (I believe that's the default). Try <code> make -k </code> if you get errors relating to drawstuff, test*, or openGL. <code> make install </code> should put <tt>libode.so</tt> in the proper place (usually <tt>/usr/local/lib</tt>), and it should be seen by opensim (<tt>ode.net.dll</tt>)

'''''Note:''' if OpenSim fails to launch with <tt>Exception: System.DllNotFoundException: ode</tt>, after compiling ODE, just copy <tt>libode.so</tt> from its usual place (probably <tt>/usr/local/lib/</tt>) to ./bin/, as per [http://metafuturing.net/index.php/OpenSim_Notebook_1 this suggestion]''

===Running===
Recent versions of OpenSim come without an <tt>OpenSim.ini</tt> file. Copy the <tt>OpenSim.ini.example</tt> file to <tt>OpenSim.ini</tt> before making any changes.
<code>
cd bin
mono OpenSim.exe
</code>

Note: if you are running a 32bit Server such as Ubuntu 8.0.4 you need the alternative launcher:

<code>
mono OpenSim.32BitLaunch.exe
</code>

* To invoke ODE, add the option:
-physics=OpenDynamicsEngine
to the <tt>mono OpenSim.exe</tt> line

or add <code> physics = OpenDynamicsEngine </code> to the [Startup] section of <tt>OpenSim.ini</tt>. Same deal for other physics engines, when available.

On mono 1.2.6, some distributions may see
Unhandled Exception: System.NotSupportedException: CodePage 1252 not supported
on startup when using mysql. This can be resolved by installing the package libmono-i18n2.0-cil (see http://bugs.mysql.com/bug.php?id=33938).

=== Additional Items ===

* [[GC_NO_EXPLICIT|GC NO EXPLICIT]] - Enable Large Heap in Mono, this has been known to help performance and stability

[[Category:Users]]

Build Instructions

2008-12-15T09:48:18Z

Magnuz: /* Mac OS X 10.5/10.4 */

[[Category:Users]]
This page covers building OpenSim from source code on multiple platforms. Please help us keep this page up to date as the project progresses.

==Download from SVN==
Check out the [[Download]] Section

==MS Windows==

OpenSim requires either the .Net framework version 2.0, or the latest Mono. It supports the following compilers:
* [http://msdn2.microsoft.com/en-us/express/aa700756.aspx Microsoft Visual C# Express Edition] (note: not Visual C++)
* [http://www.mono-project.com/ mono]

Note for people who just downloaded the sources from http://dist.opensimulator.org/ (the "Downloads" link on the left) be advised that some important things are missing (like MySQL template scripts). For such features, you must download using svn!

Additional note: any Microsoft C# Express edition should work (2005 or 2008)

=== Building ===

* In the top-level directory, run the '<tt>runprebuild.bat</tt>' file. This will create a VS2005 solution file, a nant build file and a '<tt>compile.bat</tt>' file.
* If you prefer VS2008, run the '<tt>runprebuild2008.bat</tt>' instead.

* Open the resulting sln file with visual studio and build it there, or
* Run the '<tt>compile.bat</tt>' file. This will build the executable using MSBuild.
* if you prefer to use nant, run nant in the same top-level directory. This will build the executables.

If you don't care about physics (walking on prims, etc), ignore the rest of this section.

=== Running ===

Recent versions of OpenSim come without an <tt>OpenSim.ini</tt> file. Copy the <tt>OpenSim.ini.example</tt> file to <tt>OpenSim.ini</tt> before making any changes.

Double-click on the <tt>OpenSim.exe</tt> executable file in the <tt>bin</tt> directory. This will start up OpenSim in standalone mode.

The debugger in VS2005 C# may be used to step through the code. For those that use a Cygwin shell, you may find that one or more dll's have permissions that cause problems running. Most find that a "<tt>chmod 777 *</tt>" from the <tt>bin</tt> directory solves this.

Physics can be invoked by adding the appropriate line to the [Startup] section of <tt>OpenSim.ini</tt>. For ODE, that would be:

physics = OpenDynamicsEngine

You can also add a command line option to a shortcut, or run from a command prompt with:

-physics=OpenDynamicsEngine

'''''Windows Vista'''''

To run on Windows Vista, you must first disable Windows Firewall. Under the new "Start" button of Vista, select "Control panel". Then double-click "Windows Firewall". In the window that pops up, on the left column, select "Turn Windows Firewall on or off". You will have to give permission for this to run, then select the option "Off (not recommended)". Click "OK" and exit from the Windows Firewall window.

If you have McAfee SecurityCenter, see the description below.

Once all the security features are disabled, right click on <tt>OpenSim.exe</tt> and select "Run as administrator". This will pop up a window asking permission, select "Allow". Your OpenSim server should run in a DOS-like window and accept connections.

'''''McAfee Security'''''

McAfee Security does not allow applications to listen on ports not explicitly specified. You have two options: 1) disable firewall protection all together, 2) enable <tt>OpenSim.exe</tt> to be able to open ports.

''Disable firewall''

Open McAfee SecurityCenter. Select "Internet & Network". In the lower left corner is a small link to "Configure...". Select this. In the right side of the window, select the bar that says "Firewall protection is enabled". Here you can select "Off".

''Enable <tt>OpenSim.exe</tt> to open ports''

Open McAfee SecurityCenter. Select "Internet & Network". In the lower left corner is a small link to "Configure...". Select this. In the right side of the window, select the bar that says "Firewall protection is enabled". Select the "Advanced..." button. This will pop up a new window.

In the new window, on the left side, select "Program Permissions." In the middle on the right side of the window, select the "Add Allowed Program" button. Use the browser that pops up to find the OpenSim executable and select it.

Finally, select "OK" and exit the McAfee SecurityCenter window.

==Linux/Mac OS X/FreeBSD==

The easiest plaform to get running on the Linux side is Ubuntu 8.10, 32bit. This is what most of the developers running Linux use. If you are looking for the quick path, start there.

=== Ubuntu 8.04 / 8.10 ===

For Ubuntu users on older distributions (7.10, 8.04, etc.) '''you need''' to upgrade your mono to 1.9.1.

You can use the built in packages for mono. However, for better performance, you may want to [http://xyzzyxyzzy.net/2008/05/08/updated-mono-build-script-for-hardy-heron-and-mono-191/ upgrade mono to 1.9.1] ([http://tempvariable.blogspot.com/2008/04/installing-mono-191-on-ubuntu-804-hardy.html Other simple method])

sudo apt-get install subversion nant mono-gmcs libmono-microsoft8.0-cil \
libmono-system-runtime2.0-cil libgdiplus libmono-i18n2.0-cil libmono-oracle2.0-cil ruby
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

To upgrade the Mono version to the latest stable build Mono 2.0.1, read this page [[Build Instructions/Ubuntu-Mono-2.0.1 | Ubuntu on Mono 2.0.1]]

=== openSUSE 10.3 and 11 ===

Install an openSUSE 11 or 10.3 with its default options, add the online repositories
when finished installing do an online update with all the latest packages.

In yast install these packages, for running Opensim in standalone mode.
(there is a slight diffrence between 10.3 and 11 but following should be same)
subversion
nant
mono-jscript
- check that mono-core is installed

If you just want to use SQLite then jump to last section
within this post.

* Optional mysql - for Opensim running in Grid mode:
Install these mysql packages via yast
mysql
mysql-client
mysql-administrator
mysql-gui-tools
mysql-query-browser

Before building create the mysql database.
/etc/init.d/mysql start
mysql -u root -p -h localhost
(when asked for password just hit enter)

mysql> create database opensim;
mysql> quit

set the configuration in bin/mysql_connection.ini
Or on later builds set the connection string inside bin/OpenSim.ini

Build after installation of above in bash terminal. i save it in /opt

su -
cd /opt
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

After this you should be able to continue on starting the diffrent Servers, look in the mysql-config section,or
just run your OpenSim as a Standalone. By - eagleFX

=== Mac OS X 10.5/10.4 ===
* OpenSim is now working on PowerPC Macs! Thanks to DrScofield and those who helped him. Current nightly builds for PowerPC are not working, not sure about Intel so use the 0.5 Build. OpenSim works on Intel Macs. I'm testing on PowerBook G4. Tested these step on 10.5, but not 10.4 but should work --[[User:Mokele|Mokele]] 22:36, 14 February 2008 (PST) (Works fine at least on my iMac G5 with OS 10.4.11, including expanding to local grid mode. --[[User:Magnuz|Magnuz]] 2008-12-15 10:46 (CET))
* Install XCode Developers Tools from DVD/CD Installation Disk or download from http://developer.apple.com/. You have to create an Apple account to access the downloads if you don't have an Apple account.
* Install X11 for 10.4 from the Optional Install from the DVD/CD Installation Disk. X11 for 10.5 is installed by default.
* Install Mono 1.2.5 from http://ftp.novell.com/pub/mono/archive/1.2.5/macos-10-universal/5/MonoFramework-1.2.5_5.macos10.novell.universal.dmg (The more recent releases Mono 1.2.6, 1.9.1 and 2.0.1 do not appear to work with these installation instructions. --[[User:Magnuz|Magnuz]] 2008-12-14 15:56 (CET)) and in Terminal or X11 edit the .profile file and add the following line:
export PKG_CONFIG_PATH="/Library/Frameworks/Mono.framework/Versions/Current/lib/pkgconfig/:${PKG_CONFIG_PATH}"
* Compile OpenSim
svn co http://opensimulator.org/svn/opensim/tags/0.5.0-release opensim
cd opensim
./runprebuild.sh
nant

* Download and Compile libopenjpeg-libsl-2.1.2.0.dylib and libsecondlife.dll
* libopenjpeg-libsl-2.1.2.0.dylib:
svn co http://opensimulator.org/svn/opensim-libs/old/libsl1550 opensim-libs
cd opensim-libs/openjpeg-libsl
make -f Makefile.osx
cp libopenjpeg-libsl-2.1.2.0.dylib ../../bin
* Note: The Makefile that creates the libopenjpeg-libsl-2.1.2.0.so does not compile on PowerPC, but works properly on Intel Macs. Looks like a gcc issue with compile options. (It appears to work on iMac G5 with OS X 10.4.11. --[[User:Magnuz|Magnuz]] 2008-12-14 15:55 (CET))

* libsecondlife.dll: (for PowerPC Only, see details on this step [http://xyzzyxyzzy.net/2008/02/12/installing-opensim-on-powerpcor-of-eggs-and-virtual-worlds installing OpenSim on PowerPC…or: of eggs and virtual worlds])
cd .. (back into opensim-libs)
nant
cp bin/libsecondlife.dll ../bin

* Edit the libsecondlife.dll.config (PowerPC Only). Remove the cpu="x86" tag in the last dllmap line.

=== FreeBSD 6.2 ===
su
cd /usr/ports/devel/subversion/ && make install clean (you may also need to rebuild apr-svn if this step fails)
cd /usr/ports/lang/mono/ && make install clean
cd /usr/ports/devel/nant/ && make install clean
cd /usr/ports/databases/sqlite3/ && make install clean
cd /usr/ports/x11-toolkits/libgdiplus/ && make install clean
cd /opensim/installation/directory/
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

Note: [http://opensimulator.org/wiki/OpenSim:FAQ#System.DllNotFoundException:_..2Flibopenjpeg-libsl-2.1.2.0.so|Follow the instructions on the FAQ to fix the]
"System.DllNotFoundException: ./libopenjpeg-libsl-2.1.2.0.so" issue, but use "gmake" instead of "make"

For ODE Physics you must do the following:
cd /usr/ports/graphics/libGL/ && make install clean
cd /usr/ports/graphics/libGLU/ && make install clean
cd /opensim/installation/directory/
svn co http://opensimulator.org/svn/opensim-libs/trunk opensim-libs
cd opensim-libs/unmanaged/OpenDynamicsEngine2/
sh autogen.sh
./configure --enable-shared --enable-release --disable-demos
make
mv ./ode/src/.libs/libode.so /opensim/installation/directory/opensim/bin/

=== RedHat Enterprise Linux 4 ===
sudo vi /etc/yum.repos.d/mono.repo

[mono]
name=Mono for rhel-4-i386 (stable)
baseurl=http://ftp.novell.com/pub/mono/download-stable/rhel-4-i386/
enabled=1
gpgcheck=0

sudo yum install mono-complete monodoc-core nant
svn co svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

=== RedHat Enterprise Linux 5 ===

The instructions below also work on other RedHat Linux flavors such as CentOS or maybe Fedora.

1. Put the [http://download.opensuse.org/repositories/Mono/RHEL_5/Mono.repo Mono.repo] file in the /etc/yum.repo.d/ directory:
$ sudo su -
$ cd /etc/yum.repos.d/
$ wget http://download.opensuse.org/repositories/Mono/RHEL_5/Mono.repo
Naturally use the most [http://download.opensuse.org/repositories/Mono up-to-date link for your distribution].

2. Install Mono and related tools with yum:
$ yum install mono nant mono-jscript mono-nunit
Make sure to use nunit-console2 to run your tests.

=== Fedora 5 ===
* I needed to build latest mono and nant from sources to build OpenSim successfully, the ones available in yum repository didn't work so I had to uninstall and build and configure the packages.

For detailed instructions go [http://ruakuu.blogspot.com/2008/06/installing-and-configuring-opensim-on.html here]

=== Debian 4 ===

The following packages and their dependencies are required to run OpenSim on a default Debian 4 netinstall:
* mono
* libmono-corlib2.0-cil
* libmono-sqlite2.0-cil
* libmono-system-web2.0-cil
* libmono-microsoft8.0-cil
* libmono-system-runtime2.0-cil
* libmono-oracle2.0-cil (new dependency since r7587)

Hint: Currently (Nov/28/2008) it is possible to use Debian etch, but you will need to add custom repositories for mono to work. However installing or upgrading to Lenny/Sid will enable you to use the standard debian repositories.

=== 64bit ===
Please note that only 32bit binaries are provided in the bin/ directory of subversion. If you want to use 64bit, you'll need to rebuild these shared objects. See [[Installing and running on x86-64]]

=== Physics (Open Dynamics Engine ODE) ===
As installed from svn, ODE will work on most 32 bit platforms. If you get an ODE-related crash, and/or a libode.so not found type of error, you will need to build libode from source.

Remove <tt>libode.so</tt> from the <tt>./bin</tt> folder. (Note that subsequent svn updates may replace it again; best fix is to copy your built <tt>libode.so</tt> to <tt>bin</tt>). Do NOT remove <tt>ode.net.dll</tt>! Download the latest source from:

svn co http://opensimulator.org/svn/opensim-libs/trunk/unmanaged/OpenDynamicsEngine

OpenSim requires a couple of patches on top of ODE which are not yet included upstream. When compiling, make sure to use the following configure options:

--with-trimesh=gimpact
--enable-shared

Make sure the configure script confirms these choices, and always compile with single precision (I believe that's the default). Try <code> make -k </code> if you get errors relating to drawstuff, test*, or openGL. <code> make install </code> should put <tt>libode.so</tt> in the proper place (usually <tt>/usr/local/lib</tt>), and it should be seen by opensim (<tt>ode.net.dll</tt>)

'''''Note:''' if OpenSim fails to launch with <tt>Exception: System.DllNotFoundException: ode</tt>, after compiling ODE, just copy <tt>libode.so</tt> from its usual place (probably <tt>/usr/local/lib/</tt>) to ./bin/, as per [http://metafuturing.net/index.php/OpenSim_Notebook_1 this suggestion]''

===Running===
Recent versions of OpenSim come without an <tt>OpenSim.ini</tt> file. Copy the <tt>OpenSim.ini.example</tt> file to <tt>OpenSim.ini</tt> before making any changes.
<code>
cd bin
mono OpenSim.exe
</code>

Note: if you are running a 32bit Server such as Ubuntu 8.0.4 you need the alternative launcher:

<code>
mono OpenSim.32BitLaunch.exe
</code>

* To invoke ODE, add the option:
-physics=OpenDynamicsEngine
to the <tt>mono OpenSim.exe</tt> line

or add <code> physics = OpenDynamicsEngine </code> to the [Startup] section of <tt>OpenSim.ini</tt>. Same deal for other physics engines, when available.

On mono 1.2.6, some distributions may see
Unhandled Exception: System.NotSupportedException: CodePage 1252 not supported
on startup when using mysql. This can be resolved by installing the package libmono-i18n2.0-cil (see http://bugs.mysql.com/bug.php?id=33938).

=== Additional Items ===

* [[GC_NO_EXPLICIT|GC NO EXPLICIT]] - Enable Large Heap in Mono, this has been known to help performance and stability

[[Category:Users]]

Build Instructions

2008-12-14T14:57:20Z

Magnuz: /* Mac OS X 10.5/10.4 */

[[Category:Users]]
This page covers building OpenSim from source code on multiple platforms. Please help us keep this page up to date as the project progresses.

==Download from SVN==
Check out the [[Download]] Section

==MS Windows==

OpenSim requires either the .Net framework version 2.0, or the latest Mono. It supports the following compilers:
* [http://msdn2.microsoft.com/en-us/express/aa700756.aspx Microsoft Visual C# Express Edition] (note: not Visual C++)
* [http://www.mono-project.com/ mono]

Note for people who just downloaded the sources from http://dist.opensimulator.org/ (the "Downloads" link on the left) be advised that some important things are missing (like MySQL template scripts). For such features, you must download using svn!

Additional note: any Microsoft C# Express edition should work (2005 or 2008)

=== Building ===

* In the top-level directory, run the '<tt>runprebuild.bat</tt>' file. This will create a VS2005 solution file, a nant build file and a '<tt>compile.bat</tt>' file.
* If you prefer VS2008, run the '<tt>runprebuild2008.bat</tt>' instead.

* Open the resulting sln file with visual studio and build it there, or
* Run the '<tt>compile.bat</tt>' file. This will build the executable using MSBuild.
* if you prefer to use nant, run nant in the same top-level directory. This will build the executables.

If you don't care about physics (walking on prims, etc), ignore the rest of this section.

=== Running ===

Recent versions of OpenSim come without an <tt>OpenSim.ini</tt> file. Copy the <tt>OpenSim.ini.example</tt> file to <tt>OpenSim.ini</tt> before making any changes.

Double-click on the <tt>OpenSim.exe</tt> executable file in the <tt>bin</tt> directory. This will start up OpenSim in standalone mode.

The debugger in VS2005 C# may be used to step through the code. For those that use a Cygwin shell, you may find that one or more dll's have permissions that cause problems running. Most find that a "<tt>chmod 777 *</tt>" from the <tt>bin</tt> directory solves this.

Physics can be invoked by adding the appropriate line to the [Startup] section of <tt>OpenSim.ini</tt>. For ODE, that would be:

physics = OpenDynamicsEngine

You can also add a command line option to a shortcut, or run from a command prompt with:

-physics=OpenDynamicsEngine

'''''Windows Vista'''''

To run on Windows Vista, you must first disable Windows Firewall. Under the new "Start" button of Vista, select "Control panel". Then double-click "Windows Firewall". In the window that pops up, on the left column, select "Turn Windows Firewall on or off". You will have to give permission for this to run, then select the option "Off (not recommended)". Click "OK" and exit from the Windows Firewall window.

If you have McAfee SecurityCenter, see the description below.

Once all the security features are disabled, right click on <tt>OpenSim.exe</tt> and select "Run as administrator". This will pop up a window asking permission, select "Allow". Your OpenSim server should run in a DOS-like window and accept connections.

'''''McAfee Security'''''

McAfee Security does not allow applications to listen on ports not explicitly specified. You have two options: 1) disable firewall protection all together, 2) enable <tt>OpenSim.exe</tt> to be able to open ports.

''Disable firewall''

Open McAfee SecurityCenter. Select "Internet & Network". In the lower left corner is a small link to "Configure...". Select this. In the right side of the window, select the bar that says "Firewall protection is enabled". Here you can select "Off".

''Enable <tt>OpenSim.exe</tt> to open ports''

Open McAfee SecurityCenter. Select "Internet & Network". In the lower left corner is a small link to "Configure...". Select this. In the right side of the window, select the bar that says "Firewall protection is enabled". Select the "Advanced..." button. This will pop up a new window.

In the new window, on the left side, select "Program Permissions." In the middle on the right side of the window, select the "Add Allowed Program" button. Use the browser that pops up to find the OpenSim executable and select it.

Finally, select "OK" and exit the McAfee SecurityCenter window.

==Linux/Mac OS X/FreeBSD==

The easiest plaform to get running on the Linux side is Ubuntu 8.10, 32bit. This is what most of the developers running Linux use. If you are looking for the quick path, start there.

=== Ubuntu 8.04 / 8.10 ===

For Ubuntu users on older distributions (7.10, 8.04, etc.) '''you need''' to upgrade your mono to 1.9.1.

You can use the built in packages for mono. However, for better performance, you may want to [http://xyzzyxyzzy.net/2008/05/08/updated-mono-build-script-for-hardy-heron-and-mono-191/ upgrade mono to 1.9.1] ([http://tempvariable.blogspot.com/2008/04/installing-mono-191-on-ubuntu-804-hardy.html Other simple method])

sudo apt-get install subversion nant mono-gmcs libmono-microsoft8.0-cil \
libmono-system-runtime2.0-cil libgdiplus libmono-i18n2.0-cil libmono-oracle2.0-cil ruby
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

=== openSUSE 10.3 and 11 ===

Install an openSUSE 11 or 10.3 with its default options, add the online repositories
when finished installing do an online update with all the latest packages.

In yast install these packages, for running Opensim in standalone mode.
(there is a slight diffrence between 10.3 and 11 but following should be same)
subversion
nant
mono-jscript
- check that mono-core is installed

If you just want to use SQLite then jump to last section
within this post.

* Optional mysql - for Opensim running in Grid mode:
Install these mysql packages via yast
mysql
mysql-client
mysql-administrator
mysql-gui-tools
mysql-query-browser

Before building create the mysql database.
/etc/init.d/mysql start
mysql -u root -p -h localhost
(when asked for password just hit enter)

mysql> create database opensim;
mysql> quit

set the configuration in bin/mysql_connection.ini
Or on later builds set the connection string inside bin/OpenSim.ini

Build after installation of above in bash terminal. i save it in /opt

su -
cd /opt
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

After this you should be able to continue on starting the diffrent Servers, look in the mysql-config section,or
just run your OpenSim as a Standalone. By - eagleFX

=== Mac OS X 10.5/10.4 ===
* OpenSim is now working on PowerPC Macs! Thanks to DrScofield and those who helped him. Current nightly builds for PowerPC are not working, not sure about Intel so use the 0.5 Build. OpenSim works on Intel Macs. I'm testing on PowerBook G4. Tested these step on 10.5, but not 10.4 but should work --[[User:Mokele|Mokele]] 22:36, 14 February 2008 (PST)
* Install XCode Developers Tools from DVD/CD Installation Disk or download from http://developer.apple.com/. You have to create an Apple account to access the downloads if you don't have an Apple account.
* Install X11 for 10.4 from the Optional Install from the DVD/CD Installation Disk. X11 for 10.5 is installed by default.
* Install Mono 1.2.5 from http://ftp.novell.com/pub/mono/archive/1.2.5/macos-10-universal/5/MonoFramework-1.2.5_5.macos10.novell.universal.dmg (the more recent releases Mono 1.2.6, 1.9.1 and 2.0.1 do not appear to work with these installation instructions --[[User:Magnuz|Magnuz]] 2008-12-14 15:56 (CET)) and in Terminal or X11 edit the .profile file and add the following line:
export PKG_CONFIG_PATH="/Library/Frameworks/Mono.framework/Versions/Current/lib/pkgconfig/:${PKG_CONFIG_PATH}"
* Compile OpenSim
svn co http://opensimulator.org/svn/opensim/tags/0.5.0-release opensim
cd opensim
./runprebuild.sh
nant

* Download and Compile libopenjpeg-libsl-2.1.2.0.dylib and libsecondlife.dll
* libopenjpeg-libsl-2.1.2.0.dylib:
svn co http://opensimulator.org/svn/opensim-libs/old/libsl1550 opensim-libs
cd opensim-libs/openjpeg-libsl
make -f Makefile.osx
cp libopenjpeg-libsl-2.1.2.0.dylib ../../bin
* Note: The Makefile that creates the libopenjpeg-libsl-2.1.2.0.so does not compile on PowerPC, but works properly on Intel Macs. Looks like a gcc issue with compile options. (It appears to work on iMac G5 with OS X 10.4.11.--[[User:Magnuz|Magnuz]] 2008-12-14 15:55 (CET))

* libsecondlife.dll: (for PowerPC Only, see details on this step [http://xyzzyxyzzy.net/2008/02/12/installing-opensim-on-powerpcor-of-eggs-and-virtual-worlds installing OpenSim on PowerPC…or: of eggs and virtual worlds])
cd .. (back into opensim-libs)
nant
cp bin/libsecondlife.dll ../bin

* Edit the libsecondlife.dll.config (PowerPC Only). Remove the cpu="x86" tag in the last dllmap line.

=== FreeBSD 6.2 ===
su
cd /usr/ports/devel/subversion/ && make install clean (you may also need to rebuild apr-svn if this step fails)
cd /usr/ports/lang/mono/ && make install clean
cd /usr/ports/devel/nant/ && make install clean
cd /usr/ports/databases/sqlite3/ && make install clean
cd /usr/ports/x11-toolkits/libgdiplus/ && make install clean
cd /opensim/installation/directory/
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

Note: [http://opensimulator.org/wiki/OpenSim:FAQ#System.DllNotFoundException:_..2Flibopenjpeg-libsl-2.1.2.0.so|Follow the instructions on the FAQ to fix the]
"System.DllNotFoundException: ./libopenjpeg-libsl-2.1.2.0.so" issue, but use "gmake" instead of "make"

For ODE Physics you must do the following:
cd /usr/ports/graphics/libGL/ && make install clean
cd /usr/ports/graphics/libGLU/ && make install clean
cd /opensim/installation/directory/
svn co http://opensimulator.org/svn/opensim-libs/trunk opensim-libs
cd opensim-libs/unmanaged/OpenDynamicsEngine2/
sh autogen.sh
./configure --enable-shared --enable-release --disable-demos
make
mv ./ode/src/.libs/libode.so /opensim/installation/directory/opensim/bin/

=== RedHat Enterprise Linux 4 ===
sudo vi /etc/yum.repos.d/mono.repo

[mono]
name=Mono for rhel-4-i386 (stable)
baseurl=http://ftp.novell.com/pub/mono/download-stable/rhel-4-i386/
enabled=1
gpgcheck=0

sudo yum install mono-complete monodoc-core nant
svn co svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

=== RedHat Enterprise Linux 5 ===

The instructions below also work on other RedHat Linux flavors such as CentOS or maybe Fedora.

1. Put the [http://download.opensuse.org/repositories/Mono/RHEL_5/Mono.repo Mono.repo] file in the /etc/yum.repo.d/ directory:
$ sudo su -
$ cd /etc/yum.repos.d/
$ wget http://download.opensuse.org/repositories/Mono/RHEL_5/Mono.repo
Naturally use the most [http://download.opensuse.org/repositories/Mono up-to-date link for your distribution].

2. Install Mono and related tools with yum:
$ yum install mono nant mono-jscript mono-nunit
Make sure to use nunit-console2 to run your tests.

=== Fedora 5 ===
* I needed to build latest mono and nant from sources to build OpenSim successfully, the ones available in yum repository didn't work so I had to uninstall and build and configure the packages.

For detailed instructions go [http://ruakuu.blogspot.com/2008/06/installing-and-configuring-opensim-on.html here]

=== Debian 4 ===

The following packages and their dependencies are required to run OpenSim on a default Debian 4 netinstall:
* mono
* libmono-corlib2.0-cil
* libmono-sqlite2.0-cil
* libmono-system-web2.0-cil
* libmono-microsoft8.0-cil
* libmono-system-runtime2.0-cil
* libmono-oracle2.0-cil (new dependency since r7587)

Hint: Currently (Nov/28/2008) it is possible to use Debian etch, but you will need to add custom repositories for mono to work. However installing or upgrading to Lenny/Sid will enable you to use the standard debian repositories.

=== 64bit ===
Please note that only 32bit binaries are provided in the bin/ directory of subversion. If you want to use 64bit, you'll need to rebuild these shared objects. See [[Installing and running on x86-64]]

=== Physics (Open Dynamics Engine ODE) ===
As installed from svn, ODE will work on most 32 bit platforms. If you get an ODE-related crash, and/or a libode.so not found type of error, you will need to build libode from source.

Remove <tt>libode.so</tt> from the <tt>./bin</tt> folder. (Note that subsequent svn updates may replace it again; best fix is to copy your built <tt>libode.so</tt> to <tt>bin</tt>). Do NOT remove <tt>ode.net.dll</tt>! Download the latest source from:

svn co http://opensimulator.org/svn/opensim-libs/trunk/unmanaged/OpenDynamicsEngine

OpenSim requires a couple of patches on top of ODE which are not yet included upstream. When compiling, make sure to use the following configure options:

--with-trimesh=gimpact
--enable-shared

Make sure the configure script confirms these choices, and always compile with single precision (I believe that's the default). Try <code> make -k </code> if you get errors relating to drawstuff, test*, or openGL. <code> make install </code> should put <tt>libode.so</tt> in the proper place (usually <tt>/usr/local/lib</tt>), and it should be seen by opensim (<tt>ode.net.dll</tt>)

'''''Note:''' if OpenSim fails to launch with <tt>Exception: System.DllNotFoundException: ode</tt>, after compiling ODE, just copy <tt>libode.so</tt> from its usual place (probably <tt>/usr/local/lib/</tt>) to ./bin/, as per [http://metafuturing.net/index.php/OpenSim_Notebook_1 this suggestion]''

===Running===
Recent versions of OpenSim come without an <tt>OpenSim.ini</tt> file. Copy the <tt>OpenSim.ini.example</tt> file to <tt>OpenSim.ini</tt> before making any changes.
<code>
cd bin
mono OpenSim.exe
</code>

Note: if you are running a 32bit Server such as Ubuntu 8.0.4 you need the alternative launcher:

<code>
mono OpenSim.32BitLaunch.exe
</code>

* To invoke ODE, add the option:
-physics=OpenDynamicsEngine
to the <tt>mono OpenSim.exe</tt> line

or add <code> physics = OpenDynamicsEngine </code> to the [Startup] section of <tt>OpenSim.ini</tt>. Same deal for other physics engines, when available.

On mono 1.2.6, some distributions may see
Unhandled Exception: System.NotSupportedException: CodePage 1252 not supported
on startup when using mysql. This can be resolved by installing the package libmono-i18n2.0-cil (see http://bugs.mysql.com/bug.php?id=33938).

=== Additional Items ===

* [[GC_NO_EXPLICIT|GC NO EXPLICIT]] - Enable Large Heap in Mono, this has been known to help performance and stability

[[Category:Users]]

User:Magnuz

2008-12-12T01:44:08Z

Magnuz: Magnuz presentation

Swedish male, born 1964 in Stockholm and living there since. I am a M.Sc. in chemical engineering and Ph.D. in medicine who has been working extensively with computers since 1977, with the web since 1994, with Second Life since May 2007, professional IT development since August 2008, and started trying out OpenSim December 2008.

Build Instructions

2008-12-12T01:38:59Z

Magnuz: /* Mac OS X 10.5/10.4 */

[[Category:Users]]
This page covers building OpenSim from source code on multiple platforms. Please help us keep this page up to date as the project progresses.

==Download from SVN==
Check out the [[Download]] Section

==MS Windows==

OpenSim requires either the .Net framework version 2.0, or the latest Mono. It supports the following compilers:
* [http://msdn2.microsoft.com/en-us/express/aa700756.aspx Microsoft Visual C# Express Edition] (note: not Visual C++)
* [http://www.mono-project.com/ mono]

Note for people who just downloaded the sources from http://dist.opensimulator.org/ (the "Downloads" link on the left) be advised that some important things are missing (like MySQL template scripts). For such features, you must download using svn!

Additional note: any Microsoft C# Express edition should work (2005 or 2008)

=== Building ===

* In the top-level directory, run the '<tt>runprebuild.bat</tt>' file. This will create a VS2005 solution file, a nant build file and a '<tt>compile.bat</tt>' file.
* If you prefer VS2008, run the '<tt>runprebuild2008.bat</tt>' instead.

* Open the resulting sln file with visual studio and build it there, or
* Run the '<tt>compile.bat</tt>' file. This will build the executable using MSBuild.
* if you prefer to use nant, run nant in the same top-level directory. This will build the executables.

If you don't care about physics (walking on prims, etc), ignore the rest of this section.

=== Running ===

Recent versions of OpenSim come without an <tt>OpenSim.ini</tt> file. Copy the <tt>OpenSim.ini.example</tt> file to <tt>OpenSim.ini</tt> before making any changes.

Double-click on the <tt>OpenSim.exe</tt> executable file in the <tt>bin</tt> directory. This will start up OpenSim in standalone mode.

The debugger in VS2005 C# may be used to step through the code. For those that use a Cygwin shell, you may find that one or more dll's have permissions that cause problems running. Most find that a "<tt>chmod 777 *</tt>" from the <tt>bin</tt> directory solves this.

Physics can be invoked by adding the appropriate line to the [Startup] section of <tt>OpenSim.ini</tt>. For ODE, that would be:

physics = OpenDynamicsEngine

You can also add a command line option to a shortcut, or run from a command prompt with:

-physics=OpenDynamicsEngine

'''''Windows Vista'''''

To run on Windows Vista, you must first disable Windows Firewall. Under the new "Start" button of Vista, select "Control panel". Then double-click "Windows Firewall". In the window that pops up, on the left column, select "Turn Windows Firewall on or off". You will have to give permission for this to run, then select the option "Off (not recommended)". Click "OK" and exit from the Windows Firewall window.

If you have McAfee SecurityCenter, see the description below.

Once all the security features are disabled, right click on <tt>OpenSim.exe</tt> and select "Run as administrator". This will pop up a window asking permission, select "Allow". Your OpenSim server should run in a DOS-like window and accept connections.

'''''McAfee Security'''''

McAfee Security does not allow applications to listen on ports not explicitly specified. You have two options: 1) disable firewall protection all together, 2) enable <tt>OpenSim.exe</tt> to be able to open ports.

''Disable firewall''

Open McAfee SecurityCenter. Select "Internet & Network". In the lower left corner is a small link to "Configure...". Select this. In the right side of the window, select the bar that says "Firewall protection is enabled". Here you can select "Off".

''Enable <tt>OpenSim.exe</tt> to open ports''

Open McAfee SecurityCenter. Select "Internet & Network". In the lower left corner is a small link to "Configure...". Select this. In the right side of the window, select the bar that says "Firewall protection is enabled". Select the "Advanced..." button. This will pop up a new window.

In the new window, on the left side, select "Program Permissions." In the middle on the right side of the window, select the "Add Allowed Program" button. Use the browser that pops up to find the OpenSim executable and select it.

Finally, select "OK" and exit the McAfee SecurityCenter window.

==Linux/Mac OS X/FreeBSD==

The easiest plaform to get running on the Linux side is Ubuntu 8.10, 32bit. This is what most of the developers running Linux use. If you are looking for the quick path, start there.

=== Ubuntu 8.04 / 8.10 ===

For Ubuntu users on older distributions (7.10, 8.04, etc.) '''you need''' to upgrade your mono to 1.9.1.

You can use the built in packages for mono. However, for better performance, you may want to [http://xyzzyxyzzy.net/2008/05/08/updated-mono-build-script-for-hardy-heron-and-mono-191/ upgrade mono to 1.9.1] ([http://tempvariable.blogspot.com/2008/04/installing-mono-191-on-ubuntu-804-hardy.html Other simple method])

sudo apt-get install subversion nant mono-gmcs libmono-microsoft8.0-cil \
libmono-system-runtime2.0-cil libgdiplus libmono-i18n2.0-cil libmono-oracle2.0-cil ruby
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

=== openSUSE 10.3 and 11 ===

Install an openSUSE 11 or 10.3 with its default options, add the online repositories
when finished installing do an online update with all the latest packages.

In yast install these packages, for running Opensim in standalone mode.
(there is a slight diffrence between 10.3 and 11 but following should be same)
subversion
nant
mono-jscript
- check that mono-core is installed

If you just want to use SQLite then jump to last section
within this post.

* Optional mysql - for Opensim running in Grid mode:
Install these mysql packages via yast
mysql
mysql-client
mysql-administrator
mysql-gui-tools
mysql-query-browser

Before building create the mysql database.
/etc/init.d/mysql start
mysql -u root -p -h localhost
(when asked for password just hit enter)

mysql> create database opensim;
mysql> quit

set the configuration in bin/mysql_connection.ini
Or on later builds set the connection string inside bin/OpenSim.ini

Build after installation of above in bash terminal. i save it in /opt

su -
cd /opt
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

After this you should be able to continue on starting the diffrent Servers, look in the mysql-config section,or
just run your OpenSim as a Standalone. By - eagleFX

=== Mac OS X 10.5/10.4 ===
* OpenSim is now working on PowerPC Macs! Thanks to DrScofield and those who helped him. Current nightly builds for PowerPC are not working, not sure about Intel so use the 0.5 Build. OpenSim works on Intel Macs. I'm testing on PowerBook G4. Tested these step on 10.5, but not 10.4 but should work --[[User:Mokele|Mokele]] 22:36, 14 February 2008 (PST)
* Install XCode Developers Tools from DVD/CD Installation Disk or download from http://developer.apple.com/. You have to create an Apple account to access the downloads if you don't have an Apple account.
* Install X11 for 10.4 from the Optional Install from the DVD/CD Installation Disk. X11 for 10.5 is installed by default.
* Install Mono 1.2.5 from http://ftp.novell.com/pub/mono/archive/1.2.5/macos-10-universal/5/MonoFramework-1.2.5_5.macos10.novell.universal.dmg (or Mono 2.0.1 from http://ftp.novell.com/pub/mono/archive/2.0.1/macos-10-universal/1/MonoFramework-2.0.1_1.macos10.novell.universal.dmg which is untested though --[[User:Magnuz|Magnuz]] 2008-12-12 02:35 (CET)) and in Terminal or X11 edit the .profile file and add the following line:
export PKG_CONFIG_PATH="/Library/Frameworks/Mono.framework/Versions/Current/lib/pkgconfig/:${PKG_CONFIG_PATH}"
* Compile OpenSim
svn co http://opensimulator.org/svn/opensim/tags/0.5.0-release opensim
cd opensim
./runprebuild.sh
nant

* Download and Compile libopenjpeg-libsl-2.1.2.0.dylib and libsecondlife.dll
* libopenjpeg-libsl-2.1.2.0.dylib:
svn co http://opensimulator.org/svn/opensim-libs/old/libsl1550 opensim-libs
cd opensim-libs/openjpeg-libsl
make -f Makefile.osx
cp libopenjpeg-libsl-2.1.2.0.dylib ../../bin
* Note: The Makefile that creates the libopenjpeg-libsl-2.1.2.0.so does not compile on PowerPC, but works properly on Intel Macs. Looks like a gcc issue with compile options. (Works at least on PPC G5 with OS X 10.4.11.--[[User:Magnuz|Magnuz]] 2008-12-12 02:35 (CET))

* libsecondlife.dll: (for PowerPC Only, see details on this step [http://xyzzyxyzzy.net/2008/02/12/installing-opensim-on-powerpcor-of-eggs-and-virtual-worlds installing OpenSim on PowerPC…or: of eggs and virtual worlds])
cd .. (back into opensim-libs)
nant
cp bin/libsecondlife.dll ../bin

* Edit the libsecondlife.dll.config (PowerPC Only). Remove the cpu="x86" tag in the last dllmap line.

=== FreeBSD 6.2 ===
su
cd /usr/ports/devel/subversion/ && make install clean (you may also need to rebuild apr-svn if this step fails)
cd /usr/ports/lang/mono/ && make install clean
cd /usr/ports/devel/nant/ && make install clean
cd /usr/ports/databases/sqlite3/ && make install clean
cd /usr/ports/x11-toolkits/libgdiplus/ && make install clean
cd /opensim/installation/directory/
svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

Note: [http://opensimulator.org/wiki/OpenSim:FAQ#System.DllNotFoundException:_..2Flibopenjpeg-libsl-2.1.2.0.so|Follow the instructions on the FAQ to fix the]
"System.DllNotFoundException: ./libopenjpeg-libsl-2.1.2.0.so" issue, but use "gmake" instead of "make"

For ODE Physics you must do the following:
cd /usr/ports/graphics/libGL/ && make install clean
cd /usr/ports/graphics/libGLU/ && make install clean
cd /opensim/installation/directory/
svn co http://opensimulator.org/svn/opensim-libs/trunk opensim-libs
cd opensim-libs/unmanaged/OpenDynamicsEngine2/
sh autogen.sh
./configure --enable-shared --enable-release --disable-demos
make
mv ./ode/src/.libs/libode.so /opensim/installation/directory/opensim/bin/

=== RedHat Enterprise Linux 4 ===
sudo vi /etc/yum.repos.d/mono.repo

[mono]
name=Mono for rhel-4-i386 (stable)
baseurl=http://ftp.novell.com/pub/mono/download-stable/rhel-4-i386/
enabled=1
gpgcheck=0

sudo yum install mono-complete monodoc-core nant
svn co svn co http://opensimulator.org/svn/opensim/trunk opensim
cd opensim
./runprebuild.sh
nant

=== RedHat Enterprise Linux 5 ===

The instructions below also work on other RedHat Linux flavors such as CentOS or maybe Fedora.

1. Put the [http://download.opensuse.org/repositories/Mono/RHEL_5/Mono.repo Mono.repo] file in the /etc/yum.repo.d/ directory:
$ sudo su -
$ cd /etc/yum.repos.d/
$ wget http://download.opensuse.org/repositories/Mono/RHEL_5/Mono.repo
Naturally use the most [http://download.opensuse.org/repositories/Mono up-to-date link for your distribution].

2. Install Mono and related tools with yum:
$ yum install mono nant mono-jscript mono-nunit
Make sure to use nunit-console2 to run your tests.

=== Fedora 5 ===
* I needed to build latest mono and nant from sources to build OpenSim successfully, the ones available in yum repository didn't work so I had to uninstall and build and configure the packages.

For detailed instructions go [http://ruakuu.blogspot.com/2008/06/installing-and-configuring-opensim-on.html here]

=== Debian 4 ===

The following packages and their dependencies are required to run OpenSim on a default Debian 4 netinstall:
* mono
* libmono-corlib2.0-cil
* libmono-sqlite2.0-cil
* libmono-system-web2.0-cil
* libmono-microsoft8.0-cil
* libmono-system-runtime2.0-cil
* libmono-oracle2.0-cil (new dependency since r7587)

Hint: Currently (Nov/28/2008) it is possible to use Debian etch, but you will need to add custom repositories for mono to work. However installing or upgrading to Lenny/Sid will enable you to use the standard debian repositories.

=== 64bit ===
Please note that only 32bit binaries are provided in the bin/ directory of subversion. If you want to use 64bit, you'll need to rebuild these shared objects. See [[Installing and running on x86-64]]

=== Physics (Open Dynamics Engine ODE) ===
As installed from svn, ODE will work on most 32 bit platforms. If you get an ODE-related crash, and/or a libode.so not found type of error, you will need to build libode from source.

Remove <tt>libode.so</tt> from the <tt>./bin</tt> folder. (Note that subsequent svn updates may replace it again; best fix is to copy your built <tt>libode.so</tt> to <tt>bin</tt>). Do NOT remove <tt>ode.net.dll</tt>! Download the latest source from:

svn co http://opensimulator.org/svn/opensim-libs/trunk/unmanaged/OpenDynamicsEngine

OpenSim requires a couple of patches on top of ODE which are not yet included upstream. When compiling, make sure to use the following configure options:

--with-trimesh=gimpact
--enable-shared

Make sure the configure script confirms these choices, and always compile with single precision (I believe that's the default). Try <code> make -k </code> if you get errors relating to drawstuff, test*, or openGL. <code> make install </code> should put <tt>libode.so</tt> in the proper place (usually <tt>/usr/local/lib</tt>), and it should be seen by opensim (<tt>ode.net.dll</tt>)

'''''Note:''' if OpenSim fails to launch with <tt>Exception: System.DllNotFoundException: ode</tt>, after compiling ODE, just copy <tt>libode.so</tt> from its usual place (probably <tt>/usr/local/lib/</tt>) to ./bin/, as per [http://metafuturing.net/index.php/OpenSim_Notebook_1 this suggestion]''

===Running===
Recent versions of OpenSim come without an <tt>OpenSim.ini</tt> file. Copy the <tt>OpenSim.ini.example</tt> file to <tt>OpenSim.ini</tt> before making any changes.
<code>
cd bin
mono OpenSim.exe
</code>

Note: if you are running a 32bit Server such as Ubuntu 8.0.4 you need the alternative launcher:

<code>
mono OpenSim.32BitLaunch.exe
</code>

* To invoke ODE, add the option:
-physics=OpenDynamicsEngine
to the <tt>mono OpenSim.exe</tt> line

or add <code> physics = OpenDynamicsEngine </code> to the [Startup] section of <tt>OpenSim.ini</tt>. Same deal for other physics engines, when available.

On mono 1.2.6, some distributions may see
Unhandled Exception: System.NotSupportedException: CodePage 1252 not supported
on startup when using mysql. This can be resolved by installing the package libmono-i18n2.0-cil (see http://bugs.mysql.com/bug.php?id=33938).

=== Additional Items ===

* [[GC_NO_EXPLICIT|GC NO EXPLICIT]] - Enable Large Heap in Mono, this has been known to help performance and stability

[[Category:Users]]